From mboxrd@z Thu Jan 1 00:00:00 1970 To: "Ian Guffick" Cc: linuxppc-embedded@lists.linuxppc.org Subject: Re: MCF5200 Dev Environment From: Wolfgang Denk Mime-version: 1.0 Content-type: text/plain; charset=ISO-8859-1 In-reply-to: Your message of "Mon, 24 Nov 2003 09:28:01 GMT." <001501c3b26d$459555e0$0d01a8c0@IAN> Date: Mon, 24 Nov 2003 11:24:28 +0100 Message-Id: <20031124102433.C4387C5F5F@atlas.denx.de> Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: In message <001501c3b26d$459555e0$0d01a8c0@IAN> you wrote: > > What GNU tools are available for the Motorola MCF5200 PowerPC processor. We use the ppc_82xx packages of our ELDK which is available for free download. > I presume somewhere there will be GCC, GDB, and all the other useful stuff ? Sure. See http://www.denx.de/twiki/bin/view/DULG/ELDK for details. > What tools exist for programming/debugging a board without dBug preloaded into flash ? BDI2000. > P.S. I want to avoid paying £5000 for a dev kit with Code Warrior or Green Hills or similar. > Thanks for any pointers in the right direction ;-) If you are going to do any serious work (kernel / driver development) you will want a BDI2000 rather sooner than later anyway ;-) Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de Until you walk a mile in another man's moccasins, you can't imagine the smell. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/