From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Thu, 4 Dec 2003 17:34:33 +0100 From: Samuel Rydh To: linuxppc-dev@lists.linuxppc.org Cc: benh@kernel.crashing.org Subject: Re: USB, 2.6-test11 and hot flaming death Message-ID: <20031204163433.GA21236@ibrium.se> References: <1070080961.683.26.camel@gaston> <09B6571B-2408-11D8-970C-0003939E069A@mac.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <09B6571B-2408-11D8-970C-0003939E069A@mac.com> Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: On Mon, Dec 01, 2003 at 08:09:54AM -0600, tom_gall@mac.com wrote: > > On Friday, November 28, 2003, at 10:43 PM, Benjamin Herrenschmidt wrote: > > > > >On Sat, 2003-11-29 at 06:07, tom_gall@mac.com wrote: > >>Current pull of test11 and test10 will at boot up give the following > >>error messages : > >> > >>hid: probe of 4-1.1:1.1 failed with error -5 > >>hub 4-1:1.0: hub_port_status failed (err = -108) > >>hub 4-1:1.0: hub_port_status failed (err = -108) > >>hub 4-1:1.0: hub_hub_status failed (err = -108) > >>hub 4-1:1.0: get_hub_status failed > >>hub 4-1:1.0: hub_port_status failed (err = -108) > >>usb 4-1: USB disconnect, address 2 > >>usb 4-1.1: USB disconnect, address 3 > > > >This is new to test11 ? > > Nope, effects test10 and test-11. This problem has actually been present quite a while (at least since 2.6.0-test3). On my dual 1.25 GHz G4, it occurs once every four boots or so. /Samuel ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/