From: "Yuxiao Xi" <xiyuxiao@harbournetworks.com>
To: linuxppc-embedded <linuxppc-embedded@lists.linuxppc.org>
Subject: Can not see any infomation on the console when using U-Boot 1.0.0 booting my board
Date: Sat, 6 Dec 2003 18:32:20 +0800 [thread overview]
Message-ID: <200312061024.EAA19753@lists.linuxppc.org> (raw)
hi,
I am now porting U-Boot 1.0.0 to my custumized board with mpc8240.
My reference board is Sandpoint X2.
First I created my u-boot.bin for Sandpoint X2 as following:
$make Sandpoint8240_config
$make all
and Sandpoint X2 was booted smoothly.
Then I modified the serial port information in
~~/u-boot1.0.0/include/configs/sandpoint8240.h because the serial port
address on my board is different from that on Sandpoint X2. Below are my
modification:
#define CFG_NS16550_CLK 24000000 /* 1843200 */
#define CFG_NS16550_COM1 0xff600000 /*(CFG_ISA_IO + CFG_NS87308_UART1_BASE)*/
#define CFG_NS16550_COM2 0xff600040 /*(CFG_ISA_IO + CFG_NS87308_UART2_BASE)*/
Other parameters are not modified.
After "make" and "burn u-boot.bin in flash" I reset my board
and I saw nothing on my console:(
Any suggestion? Thanks in advance.
Yuxiao Xi
2003-12-06
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
next reply other threads:[~2003-12-06 10:32 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-12-06 10:32 Yuxiao Xi [this message]
2003-12-06 15:54 ` Can not see any infomation on the console when using U-Boot 1.0.0 booting my board Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200312061024.EAA19753@lists.linuxppc.org \
--to=xiyuxiao@harbournetworks.com \
--cc=linuxppc-embedded@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).