From mboxrd@z Thu Jan 1 00:00:00 1970 To: "Yuxiao Xi" Cc: linuxppc-embedded Subject: Re: Can not see any infomation on the console when using U-Boot 1.0.0 booting my board From: Wolfgang Denk Mime-version: 1.0 Content-type: text/plain; charset=ISO-8859-1 In-reply-to: Your message of "Sat, 06 Dec 2003 18:32:20 +0800." <200312061024.EAA19753@lists.linuxppc.org> Date: Sat, 06 Dec 2003 16:54:57 +0100 Message-Id: <20031206155502.A27C8C5F5F@atlas.denx.de> Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: In message <200312061024.EAA19753@lists.linuxppc.org> you wrote: > > My reference board is Sandpoint X2. ... > and Sandpoint X2 was booted smoothly. > Then I modified the serial port information in > ~~/u-boot1.0.0/include/configs/sandpoint8240.h because the serial port You should rather create your own board config file. > address on my board is different from that on Sandpoint X2. Below are my > modification: ... > After "make" and "burn u-boot.bin in flash" I reset my board > and I saw nothing on my console:( > Any suggestion? Thanks in advance. Well, what do you expect? Remote debugging through a telepathy link? Obviously your changes are wrong and/or insufficient to make U-Boot work on your baord. Attach your BDI2000, fire up GDB and check what's going on there. Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de Name one thing windows is better than unix in? Making money for Microsoft? -- Randal L. Schwartz in <8cvi5t4c3t.fsf@gadget.cscaper.com> ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/