From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Fri, 19 Dec 2003 16:31:00 +0100 From: Wouter Cloetens To: linuxppc-embedded@lists.linuxppc.org Cc: v2p@mind.be Subject: Re: [PATCH] Insight Memec Virtex-II Pro Development Board support Message-ID: <20031219153100.GA15181@roadkill.intern.mind.be> References: <20031212215601.GH3935@roadkill.intern.mind.be> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <20031212215601.GH3935@roadkill.intern.mind.be> Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: On Fri, Dec 12, 2003 at 10:56:01PM +0100, Wouter Cloetens wrote: > Mind is making available a set of Linux kernel patches adding support for the Insight > Memec Virtex-II Pro Development Board using Memec's reference design for Linux on > ftp://ftp.mind.be/Virtex2Pro/patch-v2.4.23_linuxppc_2_4_devel/. [...] > The patches should be applied in the following order: > ftp://ftp.mind.be/Virtex2Pro/patch-v2.4.23_linuxppc_2_4_devel/patch-platform-insightv2pro > board-specific platform support > patch for the 405D5X[12] CPU_212 bug (see http://support.xilinx.com/xlnx/xil_ans_display.jsp?iLanguageID=1&iCountryID=1&getPagePath=14052) I've updated this file and patch-defconfig because: - It's not actually the CPU_212 erratum, but the solution 12 one below. I got confused by the layout. I've renamed the config option accordingly. - The problem is apparently only present on a small subset of early-release Virtex-II Pros. So I've made the option configurable, and disabled by default, instead of always enabling it for the Memec board. Sorry about that. I should've read the '4xx Ports' thread on this list a few weeks ago that discussed the issue. -- There are 10 types of people in the world: Those who understand binary, and those who don't. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/