* Linux on IBM 9076 nodes
@ 2004-01-09 17:33 Bill Noffsinger
2004-01-09 18:32 ` linas
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Bill Noffsinger @ 2004-01-09 17:33 UTC (permalink / raw)
To: linuxppc-dev
Our lab has recently acquired a 48-node IBM SP configuration based on
4-way "Winterhawk-II" Power3-2 wide nodes with 8 GB memory. I see on the
Linuxppc site (boxes) that Linux is known to work on 9076-SP nodes
(ours). How difficult is the port? IBM does not support Linux on the
9076 but does on the newer Power4 pSeries units.
Bill Noffsinger
bnoffsi@ufl.edu
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: Linux on IBM 9076 nodes 2004-01-09 17:33 Linux on IBM 9076 nodes Bill Noffsinger @ 2004-01-09 18:32 ` linas 2004-01-09 23:12 ` Remco Post 2004-01-10 0:37 ` Anton Blanchard 2 siblings, 0 replies; 6+ messages in thread From: linas @ 2004-01-09 18:32 UTC (permalink / raw) To: Bill Noffsinger; +Cc: linuxppc-dev On Fri, Jan 09, 2004 at 12:33:15PM -0500, Bill Noffsinger wrote: > > Our lab has recently acquired a 48-node IBM SP configuration based on > 4-way "Winterhawk-II" Power3-2 wide nodes with 8 GB memory. I see on the > Linuxppc site (boxes) that Linux is known to work on 9076-SP nodes > (ours). How difficult is the port? Port what? I've recompiled & run both 2.4-marcelo, 2.4-redhat, 2.4-suse (which are all very different) and 2.6-torvalds kernels on a 2-way power3 box and 'it just works'. I can't imagine why it wouldn't 'just work' on an SP. I'm guessing that the hard part for you will be to get the interconnect between the machines running. I assume this will need some funny device driver for whatever the interconnect technology is (which you didn't mention). --linas ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/ ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Linux on IBM 9076 nodes 2004-01-09 17:33 Linux on IBM 9076 nodes Bill Noffsinger 2004-01-09 18:32 ` linas @ 2004-01-09 23:12 ` Remco Post 2004-01-10 0:37 ` Anton Blanchard 2 siblings, 0 replies; 6+ messages in thread From: Remco Post @ 2004-01-09 23:12 UTC (permalink / raw) To: <linuxppc-dev@lists.linuxppc.org> <linuxppc-dev@lists.linuxppc.org> On Jan 9, 2004, at 18:33, Bill Noffsinger wrote: > > Our lab has recently acquired a 48-node IBM SP configuration based on > 4-way "Winterhawk-II" Power3-2 wide nodes with 8 GB memory. I see on > the > Linuxppc site (boxes) that Linux is known to work on 9076-SP nodes > (ours). How difficult is the port? IBM does not support Linux on the > 9076 but does on the newer Power4 pSeries units. > I guess that, since these boxes are basically just rack-mounted chrp, rs6k's, getting linux to run is easy. Getting the os on there may require some creativity, since sp nodes don't come with a removable media, so you'll have to net-boot&install, but iirc, these boxes basically do tftp, but I guess you still need a working control-workstation to be able to set the netboot. (I have never had the oppertunity to play with an sp-node at this level) as long as you don't need the sp switch (if you have one) all hardware is supported, ge, fe and even the scsi are quite common hardware, just with an IBM sticker&price-tag ;-) (I wish I had a few spare wh-II's to play with :) > Bill Noffsinger > bnoffsi@ufl.edu > > > > -- Met vriendelijke groeten, Remco Post SARA - Reken- en Netwerkdiensten http://www.sara.nl High Performance Computing Tel. +31 20 592 8008 Fax. +31 20 668 3167 "I really didn't foresee the Internet. But then, neither did the computer industry. Not that that tells us very much of course - the computer industry didn't even foresee that the century was going to end." -- Douglas Adams ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/ ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Linux on IBM 9076 nodes 2004-01-09 17:33 Linux on IBM 9076 nodes Bill Noffsinger 2004-01-09 18:32 ` linas 2004-01-09 23:12 ` Remco Post @ 2004-01-10 0:37 ` Anton Blanchard 2004-01-10 13:02 ` Remco Post 2 siblings, 1 reply; 6+ messages in thread From: Anton Blanchard @ 2004-01-10 0:37 UTC (permalink / raw) To: Bill Noffsinger; +Cc: linuxppc-dev Hi, > Our lab has recently acquired a 48-node IBM SP configuration based on > 4-way "Winterhawk-II" Power3-2 wide nodes with 8 GB memory. I see on the > Linuxppc site (boxes) that Linux is known to work on 9076-SP nodes > (ours). How difficult is the port? IBM does not support Linux on the > 9076 but does on the newer Power4 pSeries units. We've booted linux on winterhawks in the past, there was one weird problem where we allocated memory for RTAS too high but that should be fixed. As pointed out we have no support for the switch unfortunately. One of our build machines here is a nighthawk (16 way 9076) and it works nicely in case anyone has a cluster of these lying around :) Anton ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/ ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Linux on IBM 9076 nodes 2004-01-10 0:37 ` Anton Blanchard @ 2004-01-10 13:02 ` Remco Post 2004-01-12 2:20 ` how to read/write registers of CPU or Device from user space John Zhou 0 siblings, 1 reply; 6+ messages in thread From: Remco Post @ 2004-01-10 13:02 UTC (permalink / raw) To: linuxppc-dev On Jan 10, 2004, at 01:37, Anton Blanchard wrote: > > Hi, > >> Our lab has recently acquired a 48-node IBM SP configuration based on >> 4-way "Winterhawk-II" Power3-2 wide nodes with 8 GB memory. I see on >> the >> Linuxppc site (boxes) that Linux is known to work on 9076-SP nodes >> (ours). How difficult is the port? IBM does not support Linux on the >> 9076 but does on the newer Power4 pSeries units. > > We've booted linux on winterhawks in the past, there was one weird > problem where we allocated memory for RTAS too high but that should be > fixed. > > As pointed out we have no support for the switch unfortunately. > > One of our build machines here is a nighthawk (16 way 9076) and it > works > nicely in case anyone has a cluster of these lying around :) > unfortunately, IBM wanted ours back when it was traded in for 6 32way p690's.... we had 8 16cpu nodes ;-) > Anton > > > -- Met vriendelijke groeten, Remco Post SARA - Reken- en Netwerkdiensten http://www.sara.nl High Performance Computing Tel. +31 20 592 8008 Fax. +31 20 668 3167 "I really didn't foresee the Internet. But then, neither did the computer industry. Not that that tells us very much of course - the computer industry didn't even foresee that the century was going to end." -- Douglas Adams ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/ ^ permalink raw reply [flat|nested] 6+ messages in thread
* how to read/write registers of CPU or Device from user space 2004-01-10 13:02 ` Remco Post @ 2004-01-12 2:20 ` John Zhou 0 siblings, 0 replies; 6+ messages in thread From: John Zhou @ 2004-01-12 2:20 UTC (permalink / raw) To: linuxppc-dev Hi, all, when debugging kernel or driver, we need to read/write registers of CPU and devices. I wanna use /dev/mem to do, is it possible? if need to do others things? is it better to write a driver for read/write CPU/device's registers by myself? Do you have any good advice? Thanks in advance! John ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/ ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2004-01-12 2:20 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2004-01-09 17:33 Linux on IBM 9076 nodes Bill Noffsinger 2004-01-09 18:32 ` linas 2004-01-09 23:12 ` Remco Post 2004-01-10 0:37 ` Anton Blanchard 2004-01-10 13:02 ` Remco Post 2004-01-12 2:20 ` how to read/write registers of CPU or Device from user space John Zhou
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).