Porting emlinux on customized MPC860 board

Porting emlinux on customized MPC860 board

[Thamarai Selvan]

hi ALL,

I would like u all to help me out with porting issue currently iam having.
The customised MPC860 board [target], we have  doesnt have any bootloader
or code in its ROM
If i need to port emlinux from my host what related steps i should take
from the view of target.
if anyone could direct me on to the documents available on emlinux and
head.s[in particular] it would be helpful
This is my first venture towards Linux/emlinux.
so i may be foolish on some of the queries which i may post

With Regards,
Thamarai Selvan.G

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Re: Porting emlinux on customized MPC860 board

[Wolfgang Denk]

In message <OFC1528F5C.1343245D-ON65256E1A.0034551B@lntinfotech.com> you wrote:
>
> I would like u all to help me out with porting issue currently iam having.
> The customised MPC860 board [target], we have  doesnt have any bootloader
> or code in its ROM
> If i need to port emlinux from my host what related steps i should take
> from the view of target.

Step 1: get access to a BDI2000
Step 2: port / adapt U-Boot to your board
Step 3: port / adapt Linux to your board (large parts just copy & paste
        from the U-Boot drivers).

> if anyone could direct me on to the documents available on emlinux and

http://www.denx.de/twiki/bin/view/PPCEmbedded/Introduction ?
http://www.denx.de/twiki/bin/view/DULG/Manual ?

> This is my first venture towards Linux/emlinux.

Hope this helps.

Best regards,

Wolfgang Denk

--
See us @ Embedded World, Nuremberg, Feb 17 - 19,  Hall 12.0 Booth 440
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
"There are three principal ways to lose money: wine, women, and engi-
neers. While the first two are more pleasant, the third is by far the
more certain."                           - Baron Rothschild, ca. 1800

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Re: Porting emlinux on customized MPC860 board

[Wolfgang Denk]

In message <301A812E6528D511A8F70008C71E57860290FEE7@ap-bang-m02.india.tek.com> you wrote:
>
> The following site
> http://www.denx.de/twiki/bin/view/PPCEmbedded/HostDevelopmentPlatform in
> Section 4.2 refers to a document written by Wolfgang Denk for
> cross-development of tools to compile code for (embedded PowerPC systems
> using Linux on an Intel PC(http://www.denx.de/cdk-en.html). But the

This was ancient stuff.

> associated link was not active and so the document was not found. Can you
> please redirect me to the correct location. Or if anybody has still got the
> document could someone please share it with me.

Please see http://www.denx.de/twiki/bin/view/DULG/Manual instead.

Best regards,

Wolfgang Denk

--
See us @ Embedded World, Nuremberg, Feb 17 - 19,  Hall 12.0 Booth 440
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
Lead me not into temptation... I can find it myself.

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/