From mboxrd@z Thu Jan 1 00:00:00 1970 To: "Thamarai Selvan" Cc: linuxppc-embedded@lists.linuxppc.org Subject: Re: Porting emlinux on customized MPC860 board From: Wolfgang Denk Mime-version: 1.0 Content-type: text/plain; charset=ISO-8859-1 In-reply-to: Your message of "Tue, 13 Jan 2004 15:02:19 +0530." Date: Tue, 13 Jan 2004 18:53:18 +0100 Message-Id: <20040113175323.32FCBC10AF@atlas.denx.de> Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: In message you wrote: > > I would like u all to help me out with porting issue currently iam having. > The customised MPC860 board [target], we have doesnt have any bootloader > or code in its ROM > If i need to port emlinux from my host what related steps i should take > from the view of target. Step 1: get access to a BDI2000 Step 2: port / adapt U-Boot to your board Step 3: port / adapt Linux to your board (large parts just copy & paste from the U-Boot drivers). > if anyone could direct me on to the documents available on emlinux and http://www.denx.de/twiki/bin/view/PPCEmbedded/Introduction ? http://www.denx.de/twiki/bin/view/DULG/Manual ? > This is my first venture towards Linux/emlinux. Hope this helps. Best regards, Wolfgang Denk -- See us @ Embedded World, Nuremberg, Feb 17 - 19, Hall 12.0 Booth 440 Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de "There are three principal ways to lose money: wine, women, and engi- neers. While the first two are more pleasant, the third is by far the more certain." - Baron Rothschild, ca. 1800 ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/