From: Wolfgang Denk <wd@denx.de>
To: Greg Watson <gwatson@lanl.gov>
Cc: "Jack Liu" <Jack_liu@usish.com>, linuxppc-embedded@lists.linuxppc.org
Subject: Re: Sandpoint problems
Date: Mon, 16 Feb 2004 18:12:35 +0100 [thread overview]
Message-ID: <20040216171240.9276EC108D@atlas.denx.de> (raw)
In-Reply-To: Your message of "Mon, 16 Feb 2004 09:42:35 MST." <1FF3FFE3-609F-11D8-A367-000393A47A5C@lanl.gov>
In message <1FF3FFE3-609F-11D8-A367-000393A47A5C@lanl.gov> you wrote:
>
> The sandpoint has at least two (sometimes three) flash parts. The one
> containing DINK is on the PCI bus on the motherboard. One or two other
> flash parts are on the PrMC card connected to the local memory bus. It
> is normal to leave DINK alone and program one of the other flash parts
> with an alternate boot loader. There are a series of dip switches that
> switch between programming and booting from the various flash parts.
> Unfortunately the documentation for the switch positions is very
> confusing and unless you get it exactly right the board will not boot.
U-Boot comes with a file doc/README.Sandpoint8240 which explains all
the required details.
Best regards,
Wolfgang Denk
--
See us @ Embedded World, Nuremberg, Feb 17 - 19, Hall 12.0 Booth 440
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de
Beware of the Turing Tar-pit in which everything is possible but
nothing of interest is easy.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
next prev parent reply other threads:[~2004-02-16 17:12 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-02-16 10:59 Re: Sandpoint problems Jack Liu
2004-02-16 11:04 ` Wolfgang Denk
2004-02-16 16:42 ` Greg Watson
2004-02-16 17:12 ` Wolfgang Denk [this message]
-- strict thread matches above, loose matches on Subject: below --
2004-02-16 0:51 Jack Liu
2004-02-16 9:35 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040216171240.9276EC108D@atlas.denx.de \
--to=wd@denx.de \
--cc=Jack_liu@usish.com \
--cc=gwatson@lanl.gov \
--cc=linuxppc-embedded@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).