From: "Jack Liu" <Jack_liu@usish.com>
To: "linuxppc-embedded@lists.linuxppc.org"
<linuxppc-embedded@lists.linuxppc.org>
Subject: Network problem: Ping is OK, Yet telnet and ftp etc is not working
Date: Wed, 31 Mar 2004 11:2:22 +0800 [thread overview]
Message-ID: <200403310303.i2V3366P010744@ms.usish.com> (raw)
hi,all
We use ADMTek AN983B chip as our network chip. And I have porting
linux to this MPC8241 platform.Now I have a very strange problem:
If I ping my target, no answer. When I start tcpdump on my target,
the ping ... works fine. Since the hardware is put into promiscuous
mode when tcpdump is running, So I use ifconfig to put NIC work in
promiscuous mode. I thought it can temporarily solve the problem. Now
ping is OK. However When I telnet other machine, no answer.And When I
telnet my target, still no answer. I thought it may because of firewall.
So I undef CONFIG_NETFILTER in .config and autoconf.h. Still the same.
So what could be the problem?
Best regards
Jack Liu
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
next reply other threads:[~2004-03-31 3:02 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-03-31 3:02 Jack Liu [this message]
2004-03-31 18:45 ` Network problem: Ping is OK, Yet telnet and ftp etc is not working Ricardo Scop
-- strict thread matches above, loose matches on Subject: below --
2004-04-01 0:49 Jack Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200403310303.i2V3366P010744@ms.usish.com \
--to=jack_liu@usish.com \
--cc=linuxppc-embedded@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).