* Boot problems on MPC8250!!!
@ 2004-03-31 11:11 jeffy
0 siblings, 0 replies; only message in thread
From: jeffy @ 2004-03-31 11:11 UTC (permalink / raw)
To: linuxppc-embedded@lists.linuxppc; +Cc: Wolfgang Denk
Hi all:
I am porting U-BOOT and PPCLinux to my MPC8250 board, now when UBOOT
boots up and it can runs serveral steps, after the entry "serial_init()"
in board_init_f(), it hangs! I add a "serial_puts("***")" at
the end serial_init(), it can print out, and in UBOOT, the next
entry after "serial_init" should be "console_init_f", so I and a
"serial_puts("aaaa")" at the begin of "console_init_f", it don't print
out! (the soft watch dog is disabled), why about this?
Thanks a lot!
Best Regards!
jeffy
leo_guo@jisung.cn
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2004-03-31 11:11 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-03-31 11:11 Boot problems on MPC8250!!! jeffy
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).