From mboxrd@z Thu Jan 1 00:00:00 1970 From: Christian =?iso-8859-1?q?Tr=F6ster?= To: linuxppc-embedded@lists.linuxppc.org Subject: Re: Need help booting linux on IBM 405EP eval board Date: Fri, 2 Apr 2004 23:40:44 +0200 References: <1866383.1080909296@[192.168.0.230]> <5357473.1080912787@[192.168.0.230]> In-Reply-To: <5357473.1080912787@[192.168.0.230]> MIME-Version: 1.0 Message-Id: <200404022340.44604.c.troester@gmx.de> Content-Type: Text/Plain; charset="iso-8859-1" Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Am Friday 02 April 2004 20:33 schrieb Jeff Tucker: > I've re-built U-Boot in debug mode so I can see what is going on. Here's > what it spits out before the board locks up: [snip] > procfreq = 266.666 MHz > plb_busfreq = 133.333 MHz > pci_busfreq = 33.333 MHz > ethaddr = 00:04:AC:E3:24:A7 > IP addr = 192.168.0.91 > baudrate = 9600 bps > No initrd > ## Transferring control to Linux (at address 00000000) ... > > Any ideas? If you're connected via a serial console make sure to append the correct bootoptions to the kernel to get your output to /dev/ttySx. Bye, Christian - -- | mailto:c.troester@gmx.de | http://www.christian.myfen.de/ | ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/