From: Wolfgang Denk <wd@denx.de>
To: "sunrays" <lm_mailbox@sohu.com>
Cc: "Flavio Pereira" <Flavio.Pereira@za.flextronics.com>,
linuxppc-embedded@lists.linuxppc.org
Subject: Re: Need help booting linux on my 8265 board
Date: Mon, 19 Apr 2004 12:21:53 +0200 [thread overview]
Message-ID: <20040419102158.CA512C109F@atlas.denx.de> (raw)
In-Reply-To: Your message of "Mon, 19 Apr 2004 17:12:34 +0800." <001401c425ee$796087b0$061410ac@liu>
In message <001401c425ee$796087b0$061410ac@liu> you wrote:
>
> Need help booting linux on my 8265 boardHello,Mr Pereira
Can you please STOP posting nearly the same quesrtions to the
linuxppc-embedded and u-boot-users mailing lists? Please decide for
one list, or, if you really, really feel the message must go to both
lists, then send it as Cc:, but never two separate and slightly
different messages.
> I'm sure IMMR base is the same for both U-boot and Linux. Uboot mapped at 0xfff00000, but I want to know why linux mapped at 0xC0000000 , the uboot say "## Transferring control to Linux (at address 00000000) ...", so KERNELLOAD should be 0xc000000
> 0 or 0x00000000?
Welcome to the world of virtual addresses. See
http://www.denx.de/twiki/bin/view/PPCEmbedded/Kernel#Section_10.2.
> and if I use linux kernel 2.4.20, CONFIG_CLOCKS_IN_MHZ should be 0 or 1?
It should be not defined at all.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de
There are two ways to write error-free programs. Only the third one
works.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
next prev parent reply other threads:[~2004-04-19 10:21 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <5060AED8FF61F740BBB2CB0E82C192E2A03071@srv-mailrnd.azisa.co.za>
2004-04-19 9:12 ` Need help booting linux on my 8265 board sunrays
2004-04-19 10:21 ` Wolfgang Denk [this message]
2004-04-18 16:33 liuming
2004-04-18 21:11 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040419102158.CA512C109F@atlas.denx.de \
--to=wd@denx.de \
--cc=Flavio.Pereira@za.flextronics.com \
--cc=linuxppc-embedded@lists.linuxppc.org \
--cc=lm_mailbox@sohu.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).