From mboxrd@z Thu Jan 1 00:00:00 1970 To: "sunrays" Cc: "Flavio Pereira" , linuxppc-embedded@lists.linuxppc.org Subject: Re: Need help booting linux on my 8265 board From: Wolfgang Denk Mime-version: 1.0 Content-type: text/plain; charset=ISO-8859-1 In-reply-to: Your message of "Mon, 19 Apr 2004 17:12:34 +0800." <001401c425ee$796087b0$061410ac@liu> Date: Mon, 19 Apr 2004 12:21:53 +0200 Message-Id: <20040419102158.CA512C109F@atlas.denx.de> Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: In message <001401c425ee$796087b0$061410ac@liu> you wrote: > > Need help booting linux on my 8265 boardHello,Mr Pereira Can you please STOP posting nearly the same quesrtions to the linuxppc-embedded and u-boot-users mailing lists? Please decide for one list, or, if you really, really feel the message must go to both lists, then send it as Cc:, but never two separate and slightly different messages. > I'm sure IMMR base is the same for both U-boot and Linux. Uboot mapped at 0xfff00000, but I want to know why linux mapped at 0xC0000000 , the uboot say "## Transferring control to Linux (at address 00000000) ...", so KERNELLOAD should be 0xc000000 > 0 or 0x00000000? Welcome to the world of virtual addresses. See http://www.denx.de/twiki/bin/view/PPCEmbedded/Kernel#Section_10.2. > and if I use linux kernel 2.4.20, CONFIG_CLOCKS_IN_MHZ should be 0 or 1? It should be not defined at all. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de There are two ways to write error-free programs. Only the third one works. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/