From mboxrd@z Thu Jan 1 00:00:00 1970 To: Stan Partridge Cc: "'linuxppc-embedded@lists.linuxppc.org'" Subject: Re: Unable to boot Linux 2.4.24 on a custom board similar to 8260ADS From: Wolfgang Denk Mime-version: 1.0 Content-type: text/plain; charset=ISO-8859-1 In-reply-to: Your message of "Tue, 20 Apr 2004 12:58:23 EDT." Date: Tue, 20 Apr 2004 23:39:51 +0200 Message-Id: <20040420213956.DE9BEC109F@atlas.denx.de> Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: In message you wrote: > > My question is how do I make the above corresponding changes above to Linux? Only the mapping of the IMMR must be identical, and the bd_info structure. > When I attempt to boot linux it appears to hang in the function > > __delay in entry.S Did you make sure that clocks_in_mhz is unset in your U-Boot environ- ment? And did you really make sure that U-Boot and Linux use the SAME bd_info structure? My guess is your clock frequencies might be wrong. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de Every solution breeds new problems. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/