From: Shamile Khan <shamile@yahoo.com>
To: linuxppc-embedded@lists.linuxppc.org
Cc: shamile@yahoo.com
Subject: Xilinx EMAC - cannot ping
Date: Wed, 19 May 2004 16:22:52 -0700 (PDT) [thread overview]
Message-ID: <20040519232252.10109.qmail@web11604.mail.yahoo.com> (raw)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=us-ascii, Size: 2575 bytes --]
Hi,
I have a Memec FG456 evaluation board with P160 module. I
am using Xilinx ethernet core (with default configuration
in mhs file) and the open source linux driver for Xilinx
EMAC. It seems that the ethernet device is detected
correctly but I cannot seem to ping any machine in my
network. I can ping myself though. Here are some diagnostic
results.
1) insmod the driver
bash-2.05# insmod a.out
eth0: Xilinx EMAC #0 at 0xFEFE8000 mapped to 0xC3008000,
irq=31
2) ifconfig
bash-2.05# ifconfig eth0 192.168.0.55
bash-2.05# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:60:08:27:11:7B
inet addr:192.168.0.55 Bcast:192.168.0.255
Mask:255.255.255.0
inet6 addr: fe80::260:8ff:fe27:117b/10 Scope:Link
UP BROADCAST RUNNING MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0
frame:0
TX packets:7 errors:0 dropped:0 overruns:0
carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:414 (414.0 b)
Interrupt:31
lo Link encap:Local Loopback
LOOPBACK MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0
frame:0
TX packets:0 errors:0 dropped:0 overruns:0
carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0
frame:0
TX packets:0 errors:0 dropped:0 overruns:0
carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
3) bash-2.05# mii-tool -v
eth0: negotiated 100baseTx-FD flow-control, link ok
product info: vendor 00:10:18, model 30 rev 4
basic mode: autonegotiation enabled
basic status: autonegotiation complete, link ok
capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD
10baseT-HD
advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD
10baseT-HD flow-control link partner: 100baseTx-FD
100baseTx-HD 10baseT-FD 10baseT-HD flow-control
4) interrupts
bash-2.05# cat /proc/interrupts
CPU0
30: 8046 Xilinx INTC Level serial
31: 7 Xilinx INTC Level eth0
BAD: 0
5) Running ethereal on host which I am pinging to, I can
see ARP requests from my linux target sent to the host but
nothing is sent back to target.
Any ideas on the source of the problem?
Regards,
Shamile
Yahoo! Domains – Claim yours for only $14.70/year
http://smallbusiness.promotions.yahoo.com/offer
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
next reply other threads:[~2004-05-19 23:22 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-05-19 23:22 Shamile Khan [this message]
2004-05-21 16:04 ` Xilinx EMAC - cannot ping Andrei Konovalov
2004-05-21 21:10 ` Shamile Khan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040519232252.10109.qmail@web11604.mail.yahoo.com \
--to=shamile@yahoo.com \
--cc=linuxppc-embedded@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).