From mboxrd@z Thu Jan 1 00:00:00 1970 To: =?iso-8859-1?Q?I=F1igo_Lopez_Barranco?= Cc: linuxppc-embedded@lists.linuxppc.org Subject: Re: Lite5200 PCI not working From: Wolfgang Denk Mime-version: 1.0 Content-type: text/plain; charset=ISO-8859-1 In-reply-to: Your message of "Mon, 21 Jun 2004 12:03:23 +0200." <42A622EB18325843894BB8E1040E3DF5022753@sinaexchf> Date: Mon, 21 Jun 2004 12:51:36 +0200 Message-Id: <20040621105141.8BA21C13D3@atlas.denx.de> Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: In message <42A622EB18325843894BB8E1040E3DF5022753@sinaexchf> you wrote: > > I've bought a 3.3V PCI ethernet card (US Robotics 7900) and tried to use it with the Lite5200 kit, but when I power it, it doesn't even turn on, with both power LEDs (3.3V and 5V) off. What may be the problem and where should I look for it? You may have plugged it in incorrectly. Make sure that the front bezel is on the side where the serial and USB connectors are - i. e. NOT where the ATA connector is. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de The human race is a race of cowards; and I am not only marching in that procession but carrying a banner. - Mark Twain ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/