Uboot SMC2

Uboot SMC2

[Balajee Premraj]

Hi

I am trying to use uboot to boot my target board based
on MPC8260 whose serial is defined on SMC2.

I changed the config and tried boot it.I get all the
uboot messages on the console but it would not accept
any input.

When i use the same board with SMC1 as console in
uboot it works fine.

(The board has both smc1 and smc2 connected to the
serial)

Any suggestions would be appreciated

Thanks
Balajee Premraj


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Re: Uboot SMC2

[Wolfgang Denk]

In message <20040825203319.91070.qmail@web40707.mail.yahoo.com> you wrote:
>
> I am trying to use uboot to boot my target board based
> on MPC8260 whose serial is defined on SMC2.

This is off topic here. U-Boot related questions are discussed on the
u-boot-users mailing list, not here.

> I changed the config and tried boot it.I get all the
> uboot messages on the console but it would not accept
> any input.

Check  your  terminal  emulator  settings  (flow  control?)  and  the
hardware.  There  is  no  difference in the U-Boot driver for SMC1 or
SMC2, and it works fine on several other boards.

Best regards,

Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
"Love is an ideal thing, marriage a real thing; a  confusion  of  the
real with the ideal never goes unpunished."                  - Goethe

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/