From: "Jack Liu" <jack_liu@usish.com>
To: linuxppc-embedded <linuxppc-embedded@ozlabs.org>
Subject: Resend:MPC8272 PCI bridge problem?
Date: Tue, 5 Oct 2004 9:1:12 +0800 [thread overview]
Message-ID: <200410050101.i9511FEW029063@ms.usish.com> (raw)
hi,all
I have a problem using MPC8272 PCI bridge. Currently I am debugging our own board with a MPC8272 and PCI IDE chip (VIA VT6410). However I can not visit the memory of PCI space. In u-boot, When I type "md F40001F0", there is always a program check.
My configuration is as follows:
* 0x00000000-0x07FFFFFF 128MB SDRAM
* 0x80000000-0x9FFFFFFF 512MB outbound prefetchable PCI memory window
* 0xA0000000-0xBFFFFFFF 512MB outbound non-prefetchable PCI memory window
* 0xF0000000-0xF001FFFF 128KB MPC8272 internal memory
* 0xF4000000-0xF7FFFFFF 64MB outbound PCI I/O window
* 0xFE000000-0xFFFFFFFF 32MB flash
/* PCIBR0 */
#define CFG_PCI_MSTR0_LOCAL 0x80000000 /* Local base */
#define CFG_PCIMSK0_MASK PCIMSK_1GB /* Size of window */
/* PCIBR1 */
#define CFG_PCI_MSTR1_LOCAL 0xF4000000 /* Local base */
#define CFG_PCIMSK1_MASK PCIMSK_64MB /* Size of window */
#define CFG_PCI_MSTR_IO_LOCAL 0xF4000000 /* Local base */
#define CFG_PCI_MSTR_IO_BUS 0xF4000000 /* PCI base */
#define CFG_CPU_PCI_IO_START PCI_MSTR_IO_LOCAL
#define CFG_PCI_MSTR_IO_SIZE 0x04000000 /* 64MB */
#define CFG_POCMR2_MASK_ATTRIB (POCMR_MASK_64MB | POCMR_ENABLE | POCMR_PCI_IO)
So, I am wondering why the configured PCI space can not be accessed since I have configured the outbound window and PCIBR? In MPC8241, I can access PCI space by "md FE0001F0".
Any kind help will be greatly appreciated.
Best regard
Jack liu
next reply other threads:[~2004-10-05 1:01 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-10-05 1:01 Jack Liu [this message]
2004-10-05 3:47 ` Resend:MPC8272 PCI bridge problem? Matt Porter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200410050101.i9511FEW029063@ms.usish.com \
--to=jack_liu@usish.com \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).