From: Matt Porter <mporter@kernel.crashing.org>
To: "Howard, Marc" <Marc.Howard@KLA-Tencor.com>
Cc: linuxppc-embedded@ozlabs.org
Subject: Re: Trouble booting uboot on 440GX (ocotea) eval board after initial power-up boot
Date: Thu, 11 Nov 2004 21:20:47 -0700 [thread overview]
Message-ID: <20041111212047.B5291@home.com> (raw)
In-Reply-To: <91B22F93A880FA48879475E134D6F0BE283EBD@CA1EXCLV02.adcorp.kla-tencor.com>; from Marc.Howard@KLA-Tencor.com on Thu, Nov 11, 2004 at 06:19:02PM -0800
On Thu, Nov 11, 2004 at 06:19:02PM -0800, Howard, Marc wrote:
> Hi,
>
> I've built and installed U-Boot 1.1.2 on an IBM 440GX eval board
> (ocotea). After powering the board I can get the uboot interactive
> prompt. If I type 'reset' or hit the reset button it hangs. I get the
> same results whether or not I use the BDI2000. Doing a power cycle of
> the board is the only way to get back to the prompt.
>
> Is there some reconfiguation U-Boot does that causes the processor boot
> address to change after the initial power-up? Am I missing something
> here?
You might find more help on the u-boot users list.
-Matt
prev parent reply other threads:[~2004-11-12 4:20 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-11-12 2:19 Trouble booting uboot on 440GX (ocotea) eval board after initial power-up boot Howard, Marc
2004-11-12 4:20 ` Matt Porter [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20041111212047.B5291@home.com \
--to=mporter@kernel.crashing.org \
--cc=Marc.Howard@KLA-Tencor.com \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).