* Trouble booting uboot on 440GX (ocotea) eval board after initial power-up boot
@ 2004-11-12 2:19 Howard, Marc
2004-11-12 4:20 ` Matt Porter
0 siblings, 1 reply; 2+ messages in thread
From: Howard, Marc @ 2004-11-12 2:19 UTC (permalink / raw)
To: linuxppc-embedded
[-- Attachment #1.1: Type: text/plain, Size: 527 bytes --]
Hi,
I've built and installed U-Boot 1.1.2 on an IBM 440GX eval board
(ocotea). After powering the board I can get the uboot interactive
prompt. If I type 'reset' or hit the reset button it hangs. I get the
same results whether or not I use the BDI2000. Doing a power cycle of
the board is the only way to get back to the prompt.
Is there some reconfiguation U-Boot does that causes the processor boot
address to change after the initial power-up? Am I missing something
here?
Thanks,
Marc W. Howard
[-- Attachment #1.2: Type: text/html, Size: 1139 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Trouble booting uboot on 440GX (ocotea) eval board after initial power-up boot
2004-11-12 2:19 Trouble booting uboot on 440GX (ocotea) eval board after initial power-up boot Howard, Marc
@ 2004-11-12 4:20 ` Matt Porter
0 siblings, 0 replies; 2+ messages in thread
From: Matt Porter @ 2004-11-12 4:20 UTC (permalink / raw)
To: Howard, Marc; +Cc: linuxppc-embedded
On Thu, Nov 11, 2004 at 06:19:02PM -0800, Howard, Marc wrote:
> Hi,
>
> I've built and installed U-Boot 1.1.2 on an IBM 440GX eval board
> (ocotea). After powering the board I can get the uboot interactive
> prompt. If I type 'reset' or hit the reset button it hangs. I get the
> same results whether or not I use the BDI2000. Doing a power cycle of
> the board is the only way to get back to the prompt.
>
> Is there some reconfiguation U-Boot does that causes the processor boot
> address to change after the initial power-up? Am I missing something
> here?
You might find more help on the u-boot users list.
-Matt
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2004-11-12 4:20 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-11-12 2:19 Trouble booting uboot on 440GX (ocotea) eval board after initial power-up boot Howard, Marc
2004-11-12 4:20 ` Matt Porter
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).