From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from fed1rmmtao07.cox.net (fed1rmmtao07.cox.net [68.230.241.32]) by ozlabs.org (Postfix) with ESMTP id 13DB72BDF2 for ; Fri, 12 Nov 2004 15:20:54 +1100 (EST) Date: Thu, 11 Nov 2004 21:20:47 -0700 From: Matt Porter To: "Howard, Marc" Message-ID: <20041111212047.B5291@home.com> References: <91B22F93A880FA48879475E134D6F0BE283EBD@CA1EXCLV02.adcorp.kla-tencor.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <91B22F93A880FA48879475E134D6F0BE283EBD@CA1EXCLV02.adcorp.kla-tencor.com>; from Marc.Howard@KLA-Tencor.com on Thu, Nov 11, 2004 at 06:19:02PM -0800 Cc: linuxppc-embedded@ozlabs.org Subject: Re: Trouble booting uboot on 440GX (ocotea) eval board after initial power-up boot List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On Thu, Nov 11, 2004 at 06:19:02PM -0800, Howard, Marc wrote: > Hi, > > I've built and installed U-Boot 1.1.2 on an IBM 440GX eval board > (ocotea). After powering the board I can get the uboot interactive > prompt. If I type 'reset' or hit the reset button it hangs. I get the > same results whether or not I use the BDI2000. Doing a power cycle of > the board is the only way to get back to the prompt. > > Is there some reconfiguation U-Boot does that causes the processor boot > address to change after the initial power-up? Am I missing something > here? You might find more help on the u-boot users list. -Matt