440GP "Ebony" boot problems

440GP "Ebony" boot problems

[Andriy Korud]

Hi,
I'm trying to boot original 440GP "Ebony" board wiath original IBM ROM
Monitor:
...
	440GP 1.18 ROM Monitor (02/11/02)
...

However I've discovered that it requires special image in KDI (Kernel
Downloadable Image) format. And it seems that the only way to make such
image is to use 'mkimage' utility from LynuxWorks which is not widely
available :-)
Can anybody help me with this?

thanks in advance,

--

Andriy Korud

P.S. For some reason I cannot replace ROM Monitor with U-Boot on this
board.

Re: 440GP "Ebony" boot problems

[Eugene Surovegin]

On Thu, Nov 25, 2004 at 05:18:49PM +0100, Andriy Korud wrote:
> I'm trying to boot original 440GP "Ebony" board wiath original IBM ROM
> Monitor:
> ...
> 	440GP 1.18 ROM Monitor (02/11/02)
> ...
> 
> However I've discovered that it requires special image in KDI (Kernel
> Downloadable Image) format. And it seems that the only way to make such
> image is to use 'mkimage' utility from LynuxWorks which is not widely
> available :-)
> Can anybody help me with this?

Huh? I'm away from my Ebony right now, so I cannot check which 
OpenBIOS version it has but I never heard about KDI. 

Image generated by the `make bzImage` in 2.4 or 2.6 official 
kernel should be bootable on Ebony with original IBM firmware.

Why do you think IBM firmware requires LynuxWorks special image? This 
sounds like a nonsense, frankly.

--
Eugene

Re: 440GP "Ebony" boot problems

[Eugene Surovegin]

On Fri, Nov 26, 2004 at 10:13:31AM +0100, Andriy Korud wrote:
> - make bzImage within stock 2.6.9 gives me zImage.elf

You should use arch/ppc/boot/images/zImage.ebony, not zImage.elf

Correct OpenBIOS image has "\0RPO" at the beginning.

--
Eugene

Re: 440GP "Ebony" boot problems

[Andriy Korud]

I also thought similar, but:

- make bzImage within stock 2.6.9 gives me zImage.elf
- when trying to boot Ebony with it I have:

Booting from [EMAC0] Ethernet 0   ...
Sending bootp request ...


Loading file "zImage.elf" ...
Sending tftp boot request ...
Not a valid boot image file

And I'm completely lost with this :-)

regards,

--

Andriy Korud


On Thu, 2004-11-25 at 10:52 -0800, Eugene Surovegin wrote:
> On Thu, Nov 25, 2004 at 05:18:49PM +0100, Andriy Korud wrote:
> > I'm trying to boot original 440GP "Ebony" board wiath original IBM ROM
> > Monitor:
> > ...
> > 	440GP 1.18 ROM Monitor (02/11/02)
> > ...
> > 
> > However I've discovered that it requires special image in KDI (Kernel
> > Downloadable Image) format. And it seems that the only way to make such
> > image is to use 'mkimage' utility from LynuxWorks which is not widely
> > available :-)
> > Can anybody help me with this?
> 
> Huh? I'm away from my Ebony right now, so I cannot check which 
> OpenBIOS version it has but I never heard about KDI. 
> 
> Image generated by the `make bzImage` in 2.4 or 2.6 official 
> kernel should be bootable on Ebony with original IBM firmware.
> 
> Why do you think IBM firmware requires LynuxWorks special image? This 
> sounds like a nonsense, frankly.
> 
> --
> Eugene

Re: 440GP "Ebony" boot problems

[Andriy Korud]

Thanks,
the problem was buggy OpenBIOS v 1.18 (problems with EMAC).
After upgrading to 1.19 everything works fine.

thanks,

--

Andriy Korud

On Fri, 2004-11-26 at 00:30 -0800, Eugene Surovegin wrote:
> On Fri, Nov 26, 2004 at 10:13:31AM +0100, Andriy Korud wrote:
> > - make bzImage within stock 2.6.9 gives me zImage.elf
> 
> You should use arch/ppc/boot/images/zImage.ebony, not zImage.elf
> 
> Correct OpenBIOS image has "\0RPO" at the beginning.
> 
> --
> Eugene
>