From: Christoph Hellwig <hch@lst.de>
To: linuxppc-dev@ozlabs.org
Subject: status of pegasos2 support
Date: Sun, 9 Jan 2005 12:59:36 +0100 [thread overview]
Message-ID: <20050109115935.GA19249@lst.de> (raw)
Guys, could we please get some definit comments on the Pegasos2 support?
We've been carring it around forever in the Debian tree and it's been
making no progress at all.
#! /bin/sh -e
##
## All lines beginning with `## DP:' are a description of the patch.
## DP: Description: Add Pegasos 1 and 2 support.
## DP: Patch author: Sven Luther <luther@debian.org>
## DP: Upstream status: submitted and approved.
. $(dirname $0)/DPATCH
@DPATCH@
diff -urN kernel-source-2.6.8.orig/arch/ppc/kernel/ppc_ksyms.c kernel-source-2.6.8/arch/ppc/kernel/ppc_ksyms.c
--- kernel-source-2.6.8.orig/arch/ppc/kernel/ppc_ksyms.c 2004-08-14 07:37:41.000000000 +0200
+++ kernel-source-2.6.8/arch/ppc/kernel/ppc_ksyms.c 2004-12-26 11:50:48.234758552 +0100
@@ -96,6 +96,9 @@
EXPORT_SYMBOL(_prep_type);
EXPORT_SYMBOL(ucSystemType);
#endif
+#if defined(CONFIG_PPC_MULTIPLATFORM)
+EXPORT_SYMBOL(_chrp_type);
+#endif
#if !defined(__INLINE_BITOPS)
EXPORT_SYMBOL(set_bit);
diff -urN kernel-source-2.6.8.orig/arch/ppc/platforms/chrp_pci.c kernel-source-2.6.8/arch/ppc/platforms/chrp_pci.c
--- kernel-source-2.6.8.orig/arch/ppc/platforms/chrp_pci.c 2004-12-26 12:03:07.438382520 +0100
+++ kernel-source-2.6.8/arch/ppc/platforms/chrp_pci.c 2004-12-26 12:02:26.819557520 +0100
@@ -97,8 +97,9 @@
rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
int len, u32 *val)
{
+ struct pci_controller *hose = bus->sysdata;
unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
- | ((bus->number & 0xff) << 16);
+ | (((bus->number - hose->first_busno) & 0xff) << 16) | (pci_domain_nr(bus) << 24);
unsigned long ret = ~0UL;
int rval;
@@ -111,8 +112,9 @@
rtas_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
int len, u32 val)
{
+ struct pci_controller *hose = bus->sysdata;
unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
- | ((bus->number & 0xff) << 16);
+ | (((bus->number - hose->first_busno) & 0xff) << 16) | (pci_domain_nr(bus) << 24);
int rval;
rval = call_rtas("write-pci-config", 3, 1, NULL, addr, len, val);
@@ -186,6 +188,26 @@
iounmap(reg);
}
+/* Marvell Discovery II based Pegasos 2 */
+//#define PEGASOS_USE_PCI_DOMAINS
+
+static void __init
+setup_peg2(struct pci_controller *hose, struct device_node *dev)
+{
+ struct device_node *root = find_path_device("/");
+ struct device_node *rtas;
+
+ rtas = of_find_node_by_name (root, "rtas");
+ if (rtas) {
+ hose->ops = &rtas_pci_ops;
+ } else {
+ printk ("RTAS supporting Pegasos OF not found, please upgrade your firmware\n");
+ }
+#ifndef PEGASOS_USE_PCI_DOMAINS
+ pci_assign_all_busses = 1;
+#endif
+}
+
void __init
chrp_find_bridges(void)
{
@@ -195,7 +217,7 @@
struct pci_controller *hose;
unsigned int *dma;
char *model, *machine;
- int is_longtrail = 0, is_mot = 0;
+ int is_longtrail = 0, is_mot = 0, is_pegasos = 0;
struct device_node *root = find_path_device("/");
/*
@@ -207,6 +229,8 @@
if (machine != NULL) {
is_longtrail = strncmp(machine, "IBM,LongTrail", 13) == 0;
is_mot = strncmp(machine, "MOT", 3) == 0;
+ if (strncmp(machine, "Pegasos2", 8) == 0) is_pegasos = 2;
+ else if (strncmp(machine, "Pegasos", 7) == 0) is_pegasos = 1;
}
for (dev = root->child; dev != NULL; dev = dev->sibling) {
if (dev->type == NULL || strcmp(dev->type, "pci") != 0)
@@ -257,6 +281,10 @@
hose->cfg_data = (unsigned char *)
ioremap(GG2_PCI_CONFIG_BASE, 0x80000);
gg2_pci_config_base = (unsigned long) hose->cfg_data;
+ } else if (is_pegasos == 1) {
+ setup_indirect_pci(hose, 0xfec00cf8, 0xfee00cfc);
+ } else if (is_pegasos == 2) {
+ setup_peg2(hose, dev);
} else {
printk("No methods for %s (model %s), using RTAS\n",
dev->full_name, model);
@@ -274,6 +302,9 @@
printk("pci_dram_offset = %lx\n", pci_dram_offset);
}
}
-
- ppc_md.pcibios_fixup = chrp_pcibios_fixup;
+
+ if (is_pegasos)
+ ppc_md.pcibios_fixup = NULL;
+ else
+ ppc_md.pcibios_fixup = chrp_pcibios_fixup;
}
diff -urN kernel-source-2.6.8.orig/arch/ppc/platforms/chrp_setup.c kernel-source-2.6.8/arch/ppc/platforms/chrp_setup.c
--- kernel-source-2.6.8.orig/arch/ppc/platforms/chrp_setup.c 2004-12-26 12:03:07.440382216 +0100
+++ kernel-source-2.6.8/arch/ppc/platforms/chrp_setup.c 2004-12-26 12:01:39.050819472 +0100
@@ -68,6 +68,8 @@
extern unsigned long pmac_find_end_of_memory(void);
extern int of_show_percpuinfo(struct seq_file *, int);
+int _chrp_type;
+
/*
* XXX this should be in xmon.h, but putting it there means xmon.h
* has to include <linux/interrupt.h> (to get irqreturn_t), which
@@ -214,6 +216,36 @@
}
}
+void pegasos_set_l2cr(void)
+{
+ struct device_node *root = find_path_device("/");
+ char *machine;
+ struct device_node *np;
+
+ /* On Pegasos, enable the l2 cache if needed, as the OF forgets it */
+ if (root == NULL)
+ return;
+ machine = get_property(root, "model", NULL);
+ if (machine == NULL)
+ return;
+ if (_chrp_type == _CHRP_Pegasos) {
+ /* Enable L2 cache if needed */
+ np = find_type_devices("cpu");
+ if (np != NULL) {
+ unsigned int *l2cr = (unsigned int *)
+ get_property (np, "l2cr", NULL);
+ if (l2cr == NULL) {
+ printk ("Pegasos l2cr : no cpu l2cr property found\n");
+ return;
+ }
+ if (!((*l2cr) & 0x80000000)) {
+ printk ("Pegasos l2cr : L2 cache was not active, activating\n");
+ _set_L2CR(0);
+ _set_L2CR((*l2cr) | 0x80000000);
+ }
+ }
+ }
+}
void __init
chrp_setup_arch(void)
@@ -236,6 +268,9 @@
/* Lookup PCI host bridges */
chrp_find_bridges();
+ /* On pegasos, enable the L2 cache if not already done by OF */
+ pegasos_set_l2cr();
+
#ifndef CONFIG_PPC64BRIDGE
/*
* Temporary fixes for PCI devices.
@@ -400,16 +435,19 @@
if (np == NULL)
printk(KERN_ERR "Cannot find PCI interrupt acknowledge address\n");
- chrp_find_openpic();
-
- prom_get_irq_senses(init_senses, NUM_8259_INTERRUPTS, NR_IRQS);
- OpenPIC_InitSenses = init_senses;
- OpenPIC_NumInitSenses = NR_IRQS - NUM_8259_INTERRUPTS;
-
- openpic_init(NUM_8259_INTERRUPTS);
- /* We have a cascade on OpenPIC IRQ 0, Linux IRQ 16 */
- openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
+ /* Pegasos doesn't have openpic */
+ if (_chrp_type != _CHRP_Pegasos) {
+ chrp_find_openpic();
+
+ prom_get_irq_senses(init_senses, NUM_8259_INTERRUPTS, NR_IRQS);
+ OpenPIC_InitSenses = init_senses;
+ OpenPIC_NumInitSenses = NR_IRQS - NUM_8259_INTERRUPTS;
+
+ openpic_init(NUM_8259_INTERRUPTS);
+ /* We have a cascade on OpenPIC IRQ 0, Linux IRQ 16 */
+ openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
i8259_irq);
+ }
for (i = 0; i < NUM_8259_INTERRUPTS; i++)
irq_desc[i].handler = &i8259_pic;
@@ -450,6 +488,8 @@
chrp_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7)
{
+ struct device_node *root = find_path_device ("/");
+ char *machine;
#ifdef CONFIG_BLK_DEV_INITRD
/* take care of initrd if we have one */
if ( r6 )
@@ -464,12 +504,27 @@
DMA_MODE_WRITE = 0x48;
isa_io_base = CHRP_ISA_IO_BASE; /* default value */
+ machine = get_property(root, "model", NULL);
+ if (strncmp(machine, "Pegasos", 7) == 0) {
+ _chrp_type = _CHRP_Pegasos;
+ } else if (strncmp(machine, "IBM", 3) == 0) {
+ _chrp_type = _CHRP_IBM;
+ } else if (strncmp(machine, "MOT", 3) == 0) {
+ _chrp_type = _CHRP_Motorola;
+ } else {
+ /* Let's assume it is an IBM chrp if all else fails */
+ _chrp_type = _CHRP_IBM;
+ }
+
ppc_md.setup_arch = chrp_setup_arch;
ppc_md.show_percpuinfo = of_show_percpuinfo;
ppc_md.show_cpuinfo = chrp_show_cpuinfo;
ppc_md.irq_canonicalize = chrp_irq_canonicalize;
ppc_md.init_IRQ = chrp_init_IRQ;
- ppc_md.get_irq = openpic_get_irq;
+ if (_chrp_type == _CHRP_Pegasos)
+ ppc_md.get_irq = i8259_irq;
+ else
+ ppc_md.get_irq = openpic_get_irq;
ppc_md.init = chrp_init2;
diff -urN kernel-source-2.6.8.orig/arch/ppc/platforms/chrp_time.c kernel-source-2.6.8/arch/ppc/platforms/chrp_time.c
--- kernel-source-2.6.8.orig/arch/ppc/platforms/chrp_time.c 2004-12-26 12:03:07.552365192 +0100
+++ kernel-source-2.6.8/arch/ppc/platforms/chrp_time.c 2004-11-24 22:47:24.000000000 +0100
@@ -41,6 +41,8 @@
int base;
rtcs = find_compatible_devices("rtc", "pnpPNP,b00");
+ if (rtcs == NULL)
+ rtcs = find_compatible_devices("rtc", "ds1385-rtc");
if (rtcs == NULL || rtcs->addrs == NULL)
return 0;
base = rtcs->addrs[0].address;
diff -urN kernel-source-2.6.8.orig/arch/ppc/syslib/prom_init.c kernel-source-2.6.8/arch/ppc/syslib/prom_init.c
--- kernel-source-2.6.8.orig/arch/ppc/syslib/prom_init.c 2004-12-26 12:03:07.672346952 +0100
+++ kernel-source-2.6.8/arch/ppc/syslib/prom_init.c 2004-12-26 11:58:49.597580280 +0100
@@ -794,6 +794,9 @@
char *p, *d;
unsigned long phys;
void *result[3];
+ char model[32];
+ phandle node;
+ int rc;
/* Default */
phys = (unsigned long) &_stext;
@@ -850,11 +853,20 @@
klimit = (char *) (mem - offset);
- /* If we are already running at 0xc0000000, we assume we were
- * loaded by an OF bootloader which did set a BAT for us.
- * This breaks OF translate so we force phys to be 0.
- */
- if (offset == 0) {
+ node = call_prom("finddevice", 1, 1, "/");
+ rc = call_prom("getprop", 4, 1, node, "model", model, sizeof(model));
+ if (rc > 0 && !strncmp (model, "Pegasos", 7)
+ && strncmp (model, "Pegasos2", 8)) {
+ /* Pegasos 1 has a broken translate method in the OF,
+ * and furthermore the BATs are mapped 1:1 so the phys
+ * address calculated above is correct, so let's use
+ * it directly.
+ */
+ } else if (offset == 0) {
+ /* If we are already running at 0xc0000000, we assume we were
+ * loaded by an OF bootloader which did set a BAT for us.
+ * This breaks OF translate so we force phys to be 0.
+ */
prom_print("(already at 0xc0000000) phys=0\n");
phys = 0;
} else if ((int) call_prom("getprop", 4, 1, prom_chosen, "mmu",
diff -urN kernel-source-2.6.8.orig/include/asm-ppc/processor.h kernel-source-2.6.8/include/asm-ppc/processor.h
--- kernel-source-2.6.8.orig/include/asm-ppc/processor.h 2004-08-14 07:36:11.000000000 +0200
+++ kernel-source-2.6.8/include/asm-ppc/processor.h 2004-12-26 13:50:25.909586120 +0100
@@ -34,6 +34,7 @@
/* these are arbitrary */
#define _CHRP_Motorola 0x04 /* motorola chrp, the cobra */
#define _CHRP_IBM 0x05 /* IBM chrp, the longtrail and longtrail 2 */
+#define _CHRP_Pegasos 0x06 /* Genesi/bplan's Pegasos and Pegasos2 */
#define _GLOBAL(n)\
.stabs __stringify(n:F-1),N_FUN,0,0,n;\
@@ -54,6 +55,7 @@
/* what kind of prep workstation we are */
extern int _prep_type;
+extern int _chrp_type;
/*
* This is used to identify the board type from a given PReP board
next reply other threads:[~2005-01-09 11:59 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-09 11:59 Christoph Hellwig [this message]
2005-01-09 12:31 ` status of pegasos2 support Sven Luther
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050109115935.GA19249@lst.de \
--to=hch@lst.de \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).