* How to enable TAH on PPC 440GX un lk 2.4.x?
@ 2005-01-28 15:32 Sanjay Bajaj
2005-02-02 15:32 ` Ralph Siemsen
0 siblings, 1 reply; 4+ messages in thread
From: Sanjay Bajaj @ 2005-01-28 15:32 UTC (permalink / raw)
To: linuxppc-dev
Please share any information on enabling TCP/IP Acceleration Hardware on =
IBM PPC 440GX processor based board.
^ permalink raw reply [flat|nested] 4+ messages in thread
* How to enable TAH on PPC 440GX un lk 2.4.x?
@ 2005-01-28 15:33 Sanjay Bajaj
2005-01-28 16:12 ` Matt Porter
0 siblings, 1 reply; 4+ messages in thread
From: Sanjay Bajaj @ 2005-01-28 15:33 UTC (permalink / raw)
To: linuxppc-embedded
Please share any information on enabling TCP/IP Acceleration Hardware on =
IBM PPC 440GX processor based board for lk 2.4.x.
Thanks
Sanjay
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: How to enable TAH on PPC 440GX un lk 2.4.x?
2005-01-28 15:33 How to enable TAH on PPC 440GX un lk 2.4.x? Sanjay Bajaj
@ 2005-01-28 16:12 ` Matt Porter
0 siblings, 0 replies; 4+ messages in thread
From: Matt Porter @ 2005-01-28 16:12 UTC (permalink / raw)
To: Sanjay Bajaj; +Cc: linuxppc-embedded
[Please fix your mailer to wrap lines properly]
On Fri, Jan 28, 2005 at 10:33:09AM -0500, Sanjay Bajaj wrote:
> Please share any information on enabling TCP/IP Acceleration Hardware
> on IBM PPC 440GX processor based board for lk 2.4.x.
You can backport the driver from 2.6 with this support.
-Matt
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: How to enable TAH on PPC 440GX un lk 2.4.x?
2005-01-28 15:32 Sanjay Bajaj
@ 2005-02-02 15:32 ` Ralph Siemsen
0 siblings, 0 replies; 4+ messages in thread
From: Ralph Siemsen @ 2005-02-02 15:32 UTC (permalink / raw)
To: Sanjay Bajaj; +Cc: linuxppc-dev
Sanjay Bajaj wrote:
> Please share any information on enabling TCP/IP Acceleration Hardware on IBM PPC 440GX processor based board.
Matt answered this question for you when you asked it on the
linuxppc-embedded list last week. There is no TAH support in 2.4, but
the IBM EMAC ethernet driver 2.6 does support TAH mode. You would need
to backport this driver to use it with 2.4. Nobody has done this work
as far as I know, all of the current development effort is focused on
2.6. So your options are either to do the work to backport the driver,
or else use 2.6.
Regards
-Ralph
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2005-02-02 15:44 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-01-28 15:33 How to enable TAH on PPC 440GX un lk 2.4.x? Sanjay Bajaj
2005-01-28 16:12 ` Matt Porter
-- strict thread matches above, loose matches on Subject: below --
2005-01-28 15:32 Sanjay Bajaj
2005-02-02 15:32 ` Ralph Siemsen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).