From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from gate.ebshome.net (gate.ebshome.net [64.81.67.12]) (using TLSv1 with cipher EDH-RSA-DES-CBC3-SHA (168/168 bits)) (Client CN "gate.ebshome.net", Issuer "gate.ebshome.net" (not verified)) by ozlabs.org (Postfix) with ESMTP id 7E8C467A6C for ; Tue, 19 Apr 2005 02:03:13 +1000 (EST) Date: Mon, 18 Apr 2005 09:03:06 -0700 From: Eugene Surovegin To: Pawel Studencki Message-ID: <20050418160306.GF8014@gate.ebshome.net> References: <20050418153442.83479.qmail@web51309.mail.yahoo.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <20050418153442.83479.qmail@web51309.mail.yahoo.com> Cc: linuxppc-embedded@ozlabs.org Subject: Re: using initramfs with ppc List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On Mon, Apr 18, 2005 at 08:34:42AM -0700, Pawel Studencki wrote: > Hello, > > I use a custom board with 8xx and kernel 2.6.11 and > try to mount root fs > based on cramfs. I still have problems with mounting > VFS: > > VFS: Cannot open root device "mtdblock1" or > unknown-block(31,1) > Please append a correct "root=" boot option > Kernel panic - not syncing: VFS: Unable to mount root > fs on > unknown-block(31,1) > > I found, that perhaps the reason is initramfs. Unlikely. Please, check that you have mtdblock device enabled in config, also that you have configured your flash support, and mtdblock1 partition actually exists. -- Eugene