From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from gate.ebshome.net (gate.ebshome.net [64.81.67.12]) (using TLSv1 with cipher EDH-RSA-DES-CBC3-SHA (168/168 bits)) (Client CN "gate.ebshome.net", Issuer "gate.ebshome.net" (not verified)) by ozlabs.org (Postfix) with ESMTP id 7B21567BD3 for ; Fri, 8 Jul 2005 01:28:09 +1000 (EST) Date: Thu, 7 Jul 2005 08:28:05 -0700 From: Eugene Surovegin To: David Grab Message-ID: <20050707152804.GA25876@gate.ebshome.net> References: <001401c58300$3643f870$f201a8c0@SN7606> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <001401c58300$3643f870$f201a8c0@SN7606> Cc: linuxppc-embedded@ozlabs.org Subject: Re: PPC440GX IBM EMAC2/3 RGMII mode selection List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On Thu, Jul 07, 2005 at 04:28:57PM +0200, David Grab wrote: > i have some problems to configure emac2, emac3 support of my ibm ppc440gx > for linux kernel 2.6.11.6. I have two RGMII Phy?s connected to the ppc an no > other PHY?s are connected. PPC Strapping is selected for Group4 (SMII, SMII, > RGMII/RTBI, RGMII/RTBI). I only want to configure the RGMII support of emac2 > and emac3. But it seems like the PHY?s are used for eth0 (emac1) and eth1 > (emac2) which are configured as SMII. Could someone tell me, what i have to > configure to select only emac2 and emac3 in RGMII mode? Quick hack would be commenting out EMAC0 and EMAC1 ocp_def in arch/ppc/platforms/4xx/ibm440gx.c. Let me know if it works, and I'll think about more clean way to do this. -- Eugene