* Bad Magic Number when boot linux kernel with ppcboot (PPC860 board)
@ 2005-08-02 2:08 FCG WANG Baohua
2005-08-02 7:12 ` Wolfgang Denk
0 siblings, 1 reply; 3+ messages in thread
From: FCG WANG Baohua @ 2005-08-02 2:08 UTC (permalink / raw)
To: linuxppc-embedded
[-- Attachment #1: Type: text/plain, Size: 351 bytes --]
Dear All:
I use a PPC860 board and ELDK 3.1.1 (kernel 2.4.25) to boot the linux kernel, after I loaded it print the following messages:
=> bootm 0x180000
## Booting image at 00000000 ...
Bad Magic Number
=>
How to slove it, thanks a lot!
I use: zImage,
vmlinux.UBoot,
vmlinux
it all print the same messages, How can I do?
[-- Attachment #2: Type: text/html, Size: 1504 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Bad Magic Number when boot linux kernel with ppcboot (PPC860 board)
@ 2005-08-02 3:17 Debora Liu
0 siblings, 0 replies; 3+ messages in thread
From: Debora Liu @ 2005-08-02 3:17 UTC (permalink / raw)
To: FCG WANG Baohua; +Cc: Linuxppc-embedded
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 463 bytes --]
Hello, FCG WANG Baohua
In message <2005-08-02 10:08:35 Baohua.WANG@alcatel-sbell.com.cn> you wrote:
>Dear All:
> I use a PPC860 board and ELDK 3.1.1 (kernel 2.4.25) to boot the linux kernel, after I loaded it print the following messages:
>
>=> bootm 0x180000
>## Booting image at 00000000 ...
>Bad Magic Number
>=>
Please check your boot load image address.
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡Debora Liu
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡deboralh@fel.com.cn
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡2005-08-02
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Bad Magic Number when boot linux kernel with ppcboot (PPC860 board)
2005-08-02 2:08 FCG WANG Baohua
@ 2005-08-02 7:12 ` Wolfgang Denk
0 siblings, 0 replies; 3+ messages in thread
From: Wolfgang Denk @ 2005-08-02 7:12 UTC (permalink / raw)
To: FCG WANG Baohua; +Cc: linuxppc-embedded
In message <A9DE2BAF233E444FA9C5E77A5825A01E8652F9@ydmail.sbell.com.cn> you wrote:
>
> kernel, after I loaded it print the following messages:
>
> => bootm 0x180000
> ## Booting image at 00000000 ...
> Bad Magic Number
> =>
Which address did you load the image to?
> How to slove it, thanks a lot!
> I use: zImage,
> vmlinux.UBoot,
> vmlinux
> it all print the same messages, How can I do?
Please read the documentation. Only uImage = vmlinux.UBoot can work.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
"Confound these ancestors.... They've stolen our best ideas!"
- Ben Jonson
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2005-08-02 7:13 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-08-02 3:17 Bad Magic Number when boot linux kernel with ppcboot (PPC860 board) Debora Liu
-- strict thread matches above, loose matches on Subject: below --
2005-08-02 2:08 FCG WANG Baohua
2005-08-02 7:12 ` Wolfgang Denk
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).