From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mailout01.sul.t-online.com (mailout01.sul.t-online.com [194.25.134.80]) by ozlabs.org (Postfix) with ESMTP id 00DD467D82 for ; Tue, 2 Aug 2005 22:16:15 +1000 (EST) To: "FCG WANG Baohua" From: Wolfgang Denk Mime-version: 1.0 Content-type: text/plain; charset=ISO-8859-1 In-reply-to: Your message of "Tue, 02 Aug 2005 15:29:24 +0800." Date: Tue, 02 Aug 2005 14:16:02 +0200 Sender: wd@denx.de Message-Id: <20050802121602.44F113535F9@atlas.denx.de> Cc: linuxppc-embedded@ozlabs.org Subject: Re: ??: Bad Magic Number when boot linux kernel with ppcboot (PPC860 board) List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , In message you wrote: > > > The magic number is right when using vmlinux.UBoot instead of vmlinux > or zImage, Why? Because vmlinux.UBoot is a correct U-Boot image, while vmlinux and zImage are not. Read the documentation. > Another question puzzle me: > The kernel print the "Transferring control to Linux (at address > 00000000) ... " then halt ,no any response from serial port. Read the documentation. This is a FAQ. > How to not print the "Transferring control to Linux (at address > 00000000) ... " ? Is it right ? Yes, this is correct. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de Punishment becomes ineffective after a certain point. Men become in- sensitive. -- Eneg, "Patterns of Force", stardate 2534.7