From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mailout03.sul.t-online.com (mailout03.sul.t-online.com [194.25.134.81]) by ozlabs.org (Postfix) with ESMTP id 8CA9F67EB1 for ; Wed, 10 Aug 2005 17:30:34 +1000 (EST) To: "FCG WANG Baohua" From: Wolfgang Denk Mime-version: 1.0 Content-type: text/plain; charset=ISO-8859-1 In-reply-to: Your message of "Wed, 10 Aug 2005 13:50:45 +0800." Date: Wed, 10 Aug 2005 09:30:16 +0200 Sender: wd@denx.de Message-Id: <20050810073016.37BA5353C46@atlas.denx.de> Cc: linuxppc-embedded@ozlabs.org Subject: Re: ??: Some version different List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , In message you wrote: > > It is the "r3" register data wrong transfer from ppcboot to kernel. I > don't know why. very strange. !!! I'm sure that PPCBoot passes a valid pointer. If you don;t see the expected data, then you should probably go back to square one and read the FAQ: http://www.denx.de/twiki/bin/view/DULG/LinuxHangsAfterUncompressingKernel > The CONFIG_HD860 cannot be compiled in kernel. I don't know either. > There is no error or warring during config and make. There is a bug (at least one) n your modifications to the Linux kernel. > Then "Oops: kernel access of bad area, sig: 11" and stopped. > > How is the "with no serial options enabled" ? is it need any config > with "make menuconfig" ? I don't know your hardware. I don't know why you are using obsolete versions of the software (like PPCBoot) for any current work. I don't know which modifications you made to U-Boot to make it work on your hardware, or if these modifications are working at all. I don't know which modifications you made to Linux. I cannot help you. Hire an expert. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de There is nothing in this world constant but inconstancy. - Swift