From: Eugene Surovegin <ebs@ebshome.net>
To: Andrew Morton <akpm@osdl.org>
Cc: linuxppc-embedded@ozlabs.org
Subject: [PATCH] ppc32: fix EMAC Tx channel assignments for NPe405H
Date: Fri, 19 Aug 2005 19:32:04 -0700 [thread overview]
Message-ID: <20050820023204.GA6805@gate.ebshome.net> (raw)
Fix PowerPC NPe405H EMAC Tx channel assignments. EMAC unit in this
chip uses common for 4xx "two Tx / one Rx" configuration.
Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
diff --git a/arch/ppc/platforms/4xx/ibmnp405h.c b/arch/ppc/platforms/4xx/ibmnp405h.c
--- a/arch/ppc/platforms/4xx/ibmnp405h.c
+++ b/arch/ppc/platforms/4xx/ibmnp405h.c
@@ -34,7 +34,7 @@ static struct ocp_func_emac_data ibmnp40
.zmii_mux = 1, /* ZMII input of this EMAC */
.mal_idx = 0, /* MAL device index */
.mal_rx_chan = 1, /* MAL rx channel number */
- .mal_tx_chan = 1, /* MAL tx channel number */
+ .mal_tx_chan = 2, /* MAL tx channel number */
.wol_irq = 41, /* WOL interrupt number */
.mdio_idx = -1, /* No shared MDIO */
.tah_idx = -1, /* No TAH */
@@ -46,7 +46,7 @@ static struct ocp_func_emac_data ibmnp40
.zmii_mux = 2, /* ZMII input of this EMAC */
.mal_idx = 0, /* MAL device index */
.mal_rx_chan = 2, /* MAL rx channel number */
- .mal_tx_chan = 2, /* MAL tx channel number */
+ .mal_tx_chan = 4, /* MAL tx channel number */
.wol_irq = 41, /* WOL interrupt number */
.mdio_idx = -1, /* No shared MDIO */
.tah_idx = -1, /* No TAH */
@@ -58,7 +58,7 @@ static struct ocp_func_emac_data ibmnp40
.zmii_mux = 3, /* ZMII input of this EMAC */
.mal_idx = 0, /* MAL device index */
.mal_rx_chan = 3, /* MAL rx channel number */
- .mal_tx_chan = 3, /* MAL tx channel number */
+ .mal_tx_chan = 6, /* MAL tx channel number */
.wol_irq = 41, /* WOL interrupt number */
.mdio_idx = -1, /* No shared MDIO */
.tah_idx = -1, /* No TAH */
reply other threads:[~2005-08-20 2:32 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050820023204.GA6805@gate.ebshome.net \
--to=ebs@ebshome.net \
--cc=akpm@osdl.org \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).