From: Eugene Surovegin <ebs@ebshome.net>
To: Andrew Morton <akpm@osdl.org>
Cc: linuxppc-embedded@ozlabs.org
Subject: [PATCH] ppc32: add dcr_base field to ocp_func_mal_data
Date: Tue, 30 Aug 2005 21:32:38 -0700 [thread overview]
Message-ID: <20050831043238.GB15639@gate.ebshome.net> (raw)
Add dcr_base field to ocp_func_mal_data. This is preparation step for
the new EMAC driver.
Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
---
arch/ppc/platforms/4xx/ibm405ep.c | 1 +
arch/ppc/platforms/4xx/ibm405gp.c | 1 +
arch/ppc/platforms/4xx/ibm405gpr.c | 1 +
arch/ppc/platforms/4xx/ibm440ep.c | 1 +
arch/ppc/platforms/4xx/ibm440gp.c | 1 +
arch/ppc/platforms/4xx/ibm440gx.c | 1 +
arch/ppc/platforms/4xx/ibm440sp.c | 1 +
arch/ppc/platforms/4xx/ibmnp405h.c | 1 +
include/asm-ppc/ibm_ocp.h | 3 +++
9 files changed, 11 insertions(+), 0 deletions(-)
diff --git a/arch/ppc/platforms/4xx/ibm405ep.c b/arch/ppc/platforms/4xx/ibm405ep.c
--- a/arch/ppc/platforms/4xx/ibm405ep.c
+++ b/arch/ppc/platforms/4xx/ibm405ep.c
@@ -33,6 +33,7 @@ static struct ocp_func_mal_data ibm405ep
.txde_irq = 13, /* TX Descriptor Error IRQ */
.rxde_irq = 14, /* RX Descriptor Error IRQ */
.serr_irq = 10, /* MAL System Error IRQ */
+ .dcr_base = DCRN_MAL_BASE /* MAL0_CFG DCR number */
};
OCP_SYSFS_MAL_DATA()
diff --git a/arch/ppc/platforms/4xx/ibm405gp.c b/arch/ppc/platforms/4xx/ibm405gp.c
--- a/arch/ppc/platforms/4xx/ibm405gp.c
+++ b/arch/ppc/platforms/4xx/ibm405gp.c
@@ -46,6 +46,7 @@ static struct ocp_func_mal_data ibm405gp
.txde_irq = 13, /* TX Descriptor Error IRQ */
.rxde_irq = 14, /* RX Descriptor Error IRQ */
.serr_irq = 10, /* MAL System Error IRQ */
+ .dcr_base = DCRN_MAL_BASE /* MAL0_CFG DCR number */
};
OCP_SYSFS_MAL_DATA()
diff --git a/arch/ppc/platforms/4xx/ibm405gpr.c b/arch/ppc/platforms/4xx/ibm405gpr.c
--- a/arch/ppc/platforms/4xx/ibm405gpr.c
+++ b/arch/ppc/platforms/4xx/ibm405gpr.c
@@ -42,6 +42,7 @@ static struct ocp_func_mal_data ibm405gp
.txde_irq = 13, /* TX Descriptor Error IRQ */
.rxde_irq = 14, /* RX Descriptor Error IRQ */
.serr_irq = 10, /* MAL System Error IRQ */
+ .dcr_base = DCRN_MAL_BASE /* MAL0_CFG DCR number */
};
OCP_SYSFS_MAL_DATA()
diff --git a/arch/ppc/platforms/4xx/ibm440ep.c b/arch/ppc/platforms/4xx/ibm440ep.c
--- a/arch/ppc/platforms/4xx/ibm440ep.c
+++ b/arch/ppc/platforms/4xx/ibm440ep.c
@@ -53,6 +53,7 @@ static struct ocp_func_mal_data ibm440ep
.txde_irq = 33, /* TX Descriptor Error IRQ */
.rxde_irq = 34, /* RX Descriptor Error IRQ */
.serr_irq = 32, /* MAL System Error IRQ */
+ .dcr_base = DCRN_MAL_BASE /* MAL0_CFG DCR number */
};
OCP_SYSFS_MAL_DATA()
diff --git a/arch/ppc/platforms/4xx/ibm440gp.c b/arch/ppc/platforms/4xx/ibm440gp.c
--- a/arch/ppc/platforms/4xx/ibm440gp.c
+++ b/arch/ppc/platforms/4xx/ibm440gp.c
@@ -56,6 +56,7 @@ static struct ocp_func_mal_data ibm440gp
.txde_irq = 33, /* TX Descriptor Error IRQ */
.rxde_irq = 34, /* RX Descriptor Error IRQ */
.serr_irq = 32, /* MAL System Error IRQ */
+ .dcr_base = DCRN_MAL_BASE /* MAL0_CFG DCR number */
};
OCP_SYSFS_MAL_DATA()
diff --git a/arch/ppc/platforms/4xx/ibm440gx.c b/arch/ppc/platforms/4xx/ibm440gx.c
--- a/arch/ppc/platforms/4xx/ibm440gx.c
+++ b/arch/ppc/platforms/4xx/ibm440gx.c
@@ -84,6 +84,7 @@ static struct ocp_func_mal_data ibm440gx
.txde_irq = 33, /* TX Descriptor Error IRQ */
.rxde_irq = 34, /* RX Descriptor Error IRQ */
.serr_irq = 32, /* MAL System Error IRQ */
+ .dcr_base = DCRN_MAL_BASE /* MAL0_CFG DCR number */
};
OCP_SYSFS_MAL_DATA()
diff --git a/arch/ppc/platforms/4xx/ibm440sp.c b/arch/ppc/platforms/4xx/ibm440sp.c
--- a/arch/ppc/platforms/4xx/ibm440sp.c
+++ b/arch/ppc/platforms/4xx/ibm440sp.c
@@ -43,6 +43,7 @@ static struct ocp_func_mal_data ibm440sp
.txde_irq = 34, /* TX Descriptor Error IRQ */
.rxde_irq = 35, /* RX Descriptor Error IRQ */
.serr_irq = 33, /* MAL System Error IRQ */
+ .dcr_base = DCRN_MAL_BASE /* MAL0_CFG DCR number */
};
OCP_SYSFS_MAL_DATA()
diff --git a/arch/ppc/platforms/4xx/ibmnp405h.c b/arch/ppc/platforms/4xx/ibmnp405h.c
--- a/arch/ppc/platforms/4xx/ibmnp405h.c
+++ b/arch/ppc/platforms/4xx/ibmnp405h.c
@@ -73,6 +73,7 @@ static struct ocp_func_mal_data ibmnp405
.txde_irq = 46, /* TX Descriptor Error IRQ */
.rxde_irq = 47, /* RX Descriptor Error IRQ */
.serr_irq = 45, /* MAL System Error IRQ */
+ .dcr_base = DCRN_MAL_BASE /* MAL0_CFG DCR number */
};
OCP_SYSFS_MAL_DATA()
diff --git a/include/asm-ppc/ibm_ocp.h b/include/asm-ppc/ibm_ocp.h
--- a/include/asm-ppc/ibm_ocp.h
+++ b/include/asm-ppc/ibm_ocp.h
@@ -146,6 +146,7 @@ struct ocp_func_mal_data {
int txde_irq; /* TX Descriptor Error IRQ */
int rxde_irq; /* RX Descriptor Error IRQ */
int serr_irq; /* MAL System Error IRQ */
+ int dcr_base; /* MALx_CFG DCR number */
};
#define OCP_SYSFS_MAL_DATA() \
@@ -156,6 +157,7 @@ OCP_SYSFS_ADDTL(struct ocp_func_mal_data
OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, txde_irq) \
OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, rxde_irq) \
OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, serr_irq) \
+OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, dcr_base) \
\
void ocp_show_mal_data(struct device *dev) \
{ \
@@ -166,6 +168,7 @@ void ocp_show_mal_data(struct device *de
device_create_file(dev, &dev_attr_mal_txde_irq); \
device_create_file(dev, &dev_attr_mal_rxde_irq); \
device_create_file(dev, &dev_attr_mal_serr_irq); \
+ device_create_file(dev, &dev_attr_mal_dcr_base); \
}
/*
reply other threads:[~2005-08-31 4:32 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050831043238.GB15639@gate.ebshome.net \
--to=ebs@ebshome.net \
--cc=akpm@osdl.org \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox