From: Stephen Rothwell <sfr@canb.auug.org.au>
To: paulus@samba.org
Cc: ppc64-dev <linuxppc64-dev@ozlabs.org>, ppc-dev <linuxppc-dev@ozlabs.org>
Subject: [PATCH 4/6] powerpc: merge oprofile headers
Date: Mon, 19 Sep 2005 23:21:15 +1000 [thread overview]
Message-ID: <20050919232115.3347bcad.sfr@canb.auug.org.au> (raw)
In-Reply-To: <20050919231051.28fcdf30.sfr@canb.auug.org.au>
Merge include/asm-ppc64/oprofile_ipml.h and arch/ppc/oprofile/op_impl.h
into include/asm-powerpc/oprofile_ipml.h
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
arch/ppc/oprofile/common.c | 3 -
arch/ppc/oprofile/op_impl.h | 45 ------------
arch/ppc/oprofile/op_model_fsl_booke.c | 3 -
include/asm-powerpc/oprofile_impl.h | 123 ++++++++++++++++++++++++++++++++
include/asm-ppc64/oprofile_impl.h | 111 -----------------------------
5 files changed, 125 insertions(+), 160 deletions(-)
delete mode 100644 arch/ppc/oprofile/op_impl.h
create mode 100644 include/asm-powerpc/oprofile_impl.h
delete mode 100644 include/asm-ppc64/oprofile_impl.h
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
9f08e21e6ba1a97e62f77066ac8c915149908223
diff --git a/arch/ppc/oprofile/common.c b/arch/ppc/oprofile/common.c
--- a/arch/ppc/oprofile/common.c
+++ b/arch/ppc/oprofile/common.c
@@ -22,8 +22,7 @@
#include <asm/system.h>
#include <asm/perfmon.h>
#include <asm/cputable.h>
-
-#include "op_impl.h"
+#include <asm/oprofile_impl.h>
static struct op_powerpc_model *model;
diff --git a/arch/ppc/oprofile/op_impl.h b/arch/ppc/oprofile/op_impl.h
deleted file mode 100644
--- a/arch/ppc/oprofile/op_impl.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
- *
- * Based on alpha version.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef OP_IMPL_H
-#define OP_IMPL_H 1
-
-#define OP_MAX_COUNTER 8
-
-/* Per-counter configuration as set via oprofilefs. */
-struct op_counter_config {
- unsigned long enabled;
- unsigned long event;
- unsigned long count;
- unsigned long kernel;
- unsigned long user;
- unsigned long unit_mask;
-};
-
-/* System-wide configuration as set via oprofilefs. */
-struct op_system_config {
- unsigned long enable_kernel;
- unsigned long enable_user;
-};
-
-/* Per-arch configuration */
-struct op_powerpc_model {
- void (*reg_setup) (struct op_counter_config *,
- struct op_system_config *,
- int num_counters);
- void (*start) (struct op_counter_config *);
- void (*stop) (void);
- void (*handle_interrupt) (struct pt_regs *,
- struct op_counter_config *);
- int num_counters;
-};
-
-#endif /* OP_IMPL_H */
diff --git a/arch/ppc/oprofile/op_model_fsl_booke.c b/arch/ppc/oprofile/op_model_fsl_booke.c
--- a/arch/ppc/oprofile/op_model_fsl_booke.c
+++ b/arch/ppc/oprofile/op_model_fsl_booke.c
@@ -25,8 +25,7 @@
#include <asm/reg_booke.h>
#include <asm/page.h>
#include <asm/perfmon.h>
-
-#include "op_impl.h"
+#include <asm/oprofile_impl.h>
static unsigned long reset_value[OP_MAX_COUNTER];
diff --git a/include/asm-powerpc/oprofile_impl.h b/include/asm-powerpc/oprofile_impl.h
new file mode 100644
--- /dev/null
+++ b/include/asm-powerpc/oprofile_impl.h
@@ -0,0 +1,123 @@
+/*
+ * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
+ *
+ * Based on alpha version.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_POWERPC_OPROFILE_IMPL_H
+#define _ASM_POWERPC_OPROFILE_IMPL_H
+
+#define OP_MAX_COUNTER 8
+
+/* Per-counter configuration as set via oprofilefs. */
+struct op_counter_config {
+#ifdef __powerpc64__
+ unsigned long valid;
+#endif
+ unsigned long enabled;
+ unsigned long event;
+ unsigned long count;
+ unsigned long kernel;
+#ifdef __powerpc64__
+ /* We dont support per counter user/kernel selection */
+#endif
+ unsigned long user;
+ unsigned long unit_mask;
+};
+
+/* System-wide configuration as set via oprofilefs. */
+struct op_system_config {
+#ifdef __powerpc64__
+ unsigned long mmcr0;
+ unsigned long mmcr1;
+ unsigned long mmcra;
+#endif
+ unsigned long enable_kernel;
+ unsigned long enable_user;
+#ifdef __powerpc64__
+ unsigned long backtrace_spinlocks;
+#endif
+};
+
+/* Per-arch configuration */
+struct op_powerpc_model {
+ void (*reg_setup) (struct op_counter_config *,
+ struct op_system_config *,
+ int num_counters);
+#ifdef __powerpc64__
+ void (*cpu_setup) (void *);
+#endif
+ void (*start) (struct op_counter_config *);
+ void (*stop) (void);
+ void (*handle_interrupt) (struct pt_regs *,
+ struct op_counter_config *);
+ int num_counters;
+};
+
+#ifdef __powerpc64__
+extern struct op_powerpc_model op_model_rs64;
+extern struct op_powerpc_model op_model_power4;
+
+static inline unsigned int ctr_read(unsigned int i)
+{
+ switch(i) {
+ case 0:
+ return mfspr(SPRN_PMC1);
+ case 1:
+ return mfspr(SPRN_PMC2);
+ case 2:
+ return mfspr(SPRN_PMC3);
+ case 3:
+ return mfspr(SPRN_PMC4);
+ case 4:
+ return mfspr(SPRN_PMC5);
+ case 5:
+ return mfspr(SPRN_PMC6);
+ case 6:
+ return mfspr(SPRN_PMC7);
+ case 7:
+ return mfspr(SPRN_PMC8);
+ default:
+ return 0;
+ }
+}
+
+static inline void ctr_write(unsigned int i, unsigned int val)
+{
+ switch(i) {
+ case 0:
+ mtspr(SPRN_PMC1, val);
+ break;
+ case 1:
+ mtspr(SPRN_PMC2, val);
+ break;
+ case 2:
+ mtspr(SPRN_PMC3, val);
+ break;
+ case 3:
+ mtspr(SPRN_PMC4, val);
+ break;
+ case 4:
+ mtspr(SPRN_PMC5, val);
+ break;
+ case 5:
+ mtspr(SPRN_PMC6, val);
+ break;
+ case 6:
+ mtspr(SPRN_PMC7, val);
+ break;
+ case 7:
+ mtspr(SPRN_PMC8, val);
+ break;
+ default:
+ break;
+ }
+}
+#endif /* __powerpc64__ */
+
+#endif /* _ASM_POWERPC_OPROFILE_IMPL_H */
diff --git a/include/asm-ppc64/oprofile_impl.h b/include/asm-ppc64/oprofile_impl.h
deleted file mode 100644
--- a/include/asm-ppc64/oprofile_impl.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
- *
- * Based on alpha version.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef OP_IMPL_H
-#define OP_IMPL_H 1
-
-#define OP_MAX_COUNTER 8
-
-/* Per-counter configuration as set via oprofilefs. */
-struct op_counter_config {
- unsigned long valid;
- unsigned long enabled;
- unsigned long event;
- unsigned long count;
- unsigned long kernel;
- /* We dont support per counter user/kernel selection */
- unsigned long user;
- unsigned long unit_mask;
-};
-
-/* System-wide configuration as set via oprofilefs. */
-struct op_system_config {
- unsigned long mmcr0;
- unsigned long mmcr1;
- unsigned long mmcra;
- unsigned long enable_kernel;
- unsigned long enable_user;
- unsigned long backtrace_spinlocks;
-};
-
-/* Per-arch configuration */
-struct op_powerpc_model {
- void (*reg_setup) (struct op_counter_config *,
- struct op_system_config *,
- int num_counters);
- void (*cpu_setup) (void *);
- void (*start) (struct op_counter_config *);
- void (*stop) (void);
- void (*handle_interrupt) (struct pt_regs *,
- struct op_counter_config *);
- int num_counters;
-};
-
-extern struct op_powerpc_model op_model_rs64;
-extern struct op_powerpc_model op_model_power4;
-
-static inline unsigned int ctr_read(unsigned int i)
-{
- switch(i) {
- case 0:
- return mfspr(SPRN_PMC1);
- case 1:
- return mfspr(SPRN_PMC2);
- case 2:
- return mfspr(SPRN_PMC3);
- case 3:
- return mfspr(SPRN_PMC4);
- case 4:
- return mfspr(SPRN_PMC5);
- case 5:
- return mfspr(SPRN_PMC6);
- case 6:
- return mfspr(SPRN_PMC7);
- case 7:
- return mfspr(SPRN_PMC8);
- default:
- return 0;
- }
-}
-
-static inline void ctr_write(unsigned int i, unsigned int val)
-{
- switch(i) {
- case 0:
- mtspr(SPRN_PMC1, val);
- break;
- case 1:
- mtspr(SPRN_PMC2, val);
- break;
- case 2:
- mtspr(SPRN_PMC3, val);
- break;
- case 3:
- mtspr(SPRN_PMC4, val);
- break;
- case 4:
- mtspr(SPRN_PMC5, val);
- break;
- case 5:
- mtspr(SPRN_PMC6, val);
- break;
- case 6:
- mtspr(SPRN_PMC7, val);
- break;
- case 7:
- mtspr(SPRN_PMC8, val);
- break;
- default:
- break;
- }
-}
-
-#endif
next prev parent reply other threads:[~2005-09-19 13:21 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-09-19 13:10 [PATCH 0/6] powerpc: merge arch/ppc*/oprofile directories Stephen Rothwell
2005-09-19 13:13 ` [PATCH 1/6] powerpc: Move arch/ppc*/oprofile/Kconfig to arch/powerpc Stephen Rothwell
2005-09-19 13:15 ` [PATCH 2/6] Merge arch/ppc*/oprofile/Makefile into arch/powerpc/oprofile Stephen Rothwell
2005-09-19 13:18 ` [PATCH 3/6] powerpc: rename op_ppc{32, 64}_model to op_powerpc_model Stephen Rothwell
2005-09-19 13:21 ` Stephen Rothwell [this message]
2005-09-19 13:24 ` [PATCH 5/6] powerpc: merge the rest of arch/ppc*/oprofile Stephen Rothwell
2005-09-19 13:28 ` [PATCH 6/6] powerpc: reduce oprofile/common.c differences Stephen Rothwell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050919232115.3347bcad.sfr@canb.auug.org.au \
--to=sfr@canb.auug.org.au \
--cc=linuxppc-dev@ozlabs.org \
--cc=linuxppc64-dev@ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox