[PATCH 0/4] 440SPe support

[PATCH 0/4] 440SPe support

[Roland Dreier]

Here is a series of patches that add basic support for AMCC's PowerPC
440SPe SoC.  With these patches, the kernel will boot and run on the
"Yucca" 440SPe eval board, with ethernet and serial working.

I don't have PCI-X or PCI Express in a mergeable state, but I thought
it would be worth posting these now for review.  Also, it would
probably be good to figure out how we want to merge this upstream once
2.6.14 comes out -- 440SPe requires some minor changes to ethernet PHY
handling, which will have to be coordinated with the ibm_emac rewrite,
and there are also some minor conflicts with the 440GR patches I saw.

Right now I'm working on PCI Express support, and I'll post those
patches once I have something reasonable.

I also have a git tree at

    rsync://rsync.kernel.org/pub/scm/linux/kernel/git/roland/ppc440spe.git

that contains all of these patches, in case that makes it easier to
merge this stuff.

Thanks,
  Roland

[PATCH 1/4] [PPC32] Allow ERPN for early serial to depend on CPU type

[Roland Dreier]

The PowerPC 440SPe supports up to 16 GB of RAM, and therefore its IO
registers are at 0x4_xxxx_xxxx instead of being at 0x1_xxxx_xxxx like
most other PPC 440 chips.  To allow for this, this patch moves the
definition of the ERPN used for mapping UART0 from being hard-coded in
the head_44x.S assembly code to being defined in ibm44x.h.

Signed-off-by: Roland Dreier <rolandd@cisco.com>

---

 arch/ppc/kernel/head_44x.S |    4 ++--
 include/asm-ppc/ibm44x.h   |    7 ++++++-
 2 files changed, 8 insertions(+), 3 deletions(-)

eb79641bc2a92b7d4c2f62e072650e20a7748f45
diff --git a/arch/ppc/kernel/head_44x.S b/arch/ppc/kernel/head_44x.S
--- a/arch/ppc/kernel/head_44x.S
+++ b/arch/ppc/kernel/head_44x.S
@@ -190,8 +190,8 @@ skpinv:	addi	r4,r4,1				/* Increment */
 
 	/* xlat fields */
 	lis	r4,UART0_PHYS_IO_BASE@h		/* RPN depends on SoC */
-#ifndef CONFIG_440EP
-	ori	r4,r4,0x0001		/* ERPN is 1 for second 4GB page */
+#ifdef UART0_PHYS_ERPN
+	ori	r4,r4,UART0_PHYS_ERPN		/* Add ERPN if above 4GB */
 #endif
 
 	/* attrib fields */
diff --git a/include/asm-ppc/ibm44x.h b/include/asm-ppc/ibm44x.h
--- a/include/asm-ppc/ibm44x.h
+++ b/include/asm-ppc/ibm44x.h
@@ -34,12 +34,17 @@
 /* Lowest TLB slot consumed by the default pinned TLBs */
 #define PPC44x_LOW_SLOT		63
 
-/* LS 32-bits of UART0 physical address location for early serial text debug */
+/*
+ * Least significant 32-bits and extended real page number (ERPN) of
+ * UART0 physical address location for early serial text debug
+ */
 #if defined(CONFIG_440SP)
+#define UART0_PHYS_ERPN		1
 #define UART0_PHYS_IO_BASE	0xf0000200
 #elif defined(CONFIG_440EP)
 #define UART0_PHYS_IO_BASE	0xe0000000
 #else
+#define UART0_PHYS_ERPN		1
 #define UART0_PHYS_IO_BASE	0x40000200
 #endif
 

[PATCH 2/4] [PPC32] Add 440SPe support

[Roland Dreier]

Add support for the AMCC PowerPC 440SPe SoC.

Signed-off-by: Roland Dreier <rolandd@cisco.com>

---

 arch/ppc/kernel/cputable.c          |   10 +++
 arch/ppc/platforms/4xx/Kconfig      |    8 ++
 arch/ppc/platforms/4xx/Makefile     |    1 
 arch/ppc/platforms/4xx/amcc440spe.c |  134 +++++++++++++++++++++++++++++++++++
 arch/ppc/platforms/4xx/amcc440spe.h |   64 +++++++++++++++++
 arch/ppc/syslib/Makefile            |    1 
 arch/ppc/syslib/ibm440sp_common.c   |    4 +
 arch/ppc/syslib/ppc4xx_pic.c        |   38 ++++++++++
 include/asm-ppc/ibm44x.h            |   42 ++++++++---
 9 files changed, 287 insertions(+), 15 deletions(-)
 create mode 100644 arch/ppc/platforms/4xx/amcc440spe.c
 create mode 100644 arch/ppc/platforms/4xx/amcc440spe.h

4d773d76476fd1f577d1c7755c24d973fbfc1fe5
diff --git a/arch/ppc/kernel/cputable.c b/arch/ppc/kernel/cputable.c
--- a/arch/ppc/kernel/cputable.c
+++ b/arch/ppc/kernel/cputable.c
@@ -972,6 +972,16 @@ struct cpu_spec	cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 	},
+	{ /* 440SPe Rev. A */
+		.pvr_mask		= 0xff000fff,
+		.pvr_value		= 0x53000890,
+		.cpu_name		= "440SPe Rev. A",
+		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
+			CPU_FTR_USE_TB,
+		.cpu_user_features	= PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+	},
 #endif /* CONFIG_44x */
 #ifdef CONFIG_FSL_BOOKE
 	{ 	/* e200z5 */
diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig
--- a/arch/ppc/platforms/4xx/Kconfig
+++ b/arch/ppc/platforms/4xx/Kconfig
@@ -124,9 +124,13 @@ config 440SP
 	depends on LUAN
 	default y
 
+config 440SPE
+	bool
+	default n
+
 config 440
 	bool
-	depends on 440GP || 440SP || 440EP
+	depends on 440GP || 440SP || 440SPE || 440EP
 	default y
 
 config 440A
@@ -168,7 +172,7 @@ config XILINX_OCP
 
 config IBM_EMAC4
 	bool
-	depends on 440GX || 440SP
+	depends on 440GX || 440SP || 440SPE
 	default y
 
 config BIOS_FIXUP
diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile
--- a/arch/ppc/platforms/4xx/Makefile
+++ b/arch/ppc/platforms/4xx/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_440EP)		+= ibm440ep.o
 obj-$(CONFIG_440GP)		+= ibm440gp.o
 obj-$(CONFIG_440GX)		+= ibm440gx.o
 obj-$(CONFIG_440SP)		+= ibm440sp.o
+obj-$(CONFIG_440SPE)		+= amcc440spe.o
 obj-$(CONFIG_405EP)		+= ibm405ep.o
 obj-$(CONFIG_405GPR)		+= ibm405gpr.o
 obj-$(CONFIG_VIRTEX_II_PRO)	+= virtex-ii_pro.o
diff --git a/arch/ppc/platforms/4xx/amcc440spe.c b/arch/ppc/platforms/4xx/amcc440spe.c
new file mode 100644
--- /dev/null
+++ b/arch/ppc/platforms/4xx/amcc440spe.c
@@ -0,0 +1,134 @@
+/*
+ * arch/ppc/platforms/4xx/amc440spe.c
+ *
+ * PPC440SPe I/O descriptions
+ *
+ * Roland Dreier <rolandd@cisco.com>
+ * Copyright (c) 2005 Cisco Systems.  All rights reserved.
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2002-2005 MontaVista Software Inc.
+ *
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ * Copyright (c) 2003, 2004 Zultys Technologies
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <platforms/4xx/amcc440spe.h>
+#include <asm/ocp.h>
+
+static struct ocp_func_emac_data amc440spe_emac0_def = {
+	.rgmii_idx	= -1,		/* No RGMII */
+	.rgmii_mux	= -1,		/* No RGMII */
+	.zmii_idx       = -1,           /* No ZMII */
+	.zmii_mux       = -1,           /* No ZMII */
+	.mal_idx        = 0,            /* MAL device index */
+	.mal_rx_chan    = 0,            /* MAL rx channel number */
+	.mal_tx_chan    = 0,            /* MAL tx channel number */
+	.wol_irq        = 61,  		/* WOL interrupt number */
+	.mdio_idx       = -1,           /* No shared MDIO */
+	.tah_idx	= -1,		/* No TAH */
+	.jumbo		= 1,		/* Jumbo frames supported */
+};
+OCP_SYSFS_EMAC_DATA()
+
+static struct ocp_func_mal_data amc440spe_mal0_def = {
+	.num_tx_chans   = 1,    	/* Number of TX channels */
+	.num_rx_chans   = 1,    	/* Number of RX channels */
+	.txeob_irq	= 38,		/* TX End Of Buffer IRQ  */
+	.rxeob_irq	= 39,		/* RX End Of Buffer IRQ  */
+	.txde_irq	= 34,		/* TX Descriptor Error IRQ */
+	.rxde_irq	= 35,		/* RX Descriptor Error IRQ */
+	.serr_irq	= 33,		/* MAL System Error IRQ    */
+};
+OCP_SYSFS_MAL_DATA()
+
+static struct ocp_func_iic_data amc440spe_iic0_def = {
+	.fast_mode	= 0,		/* Use standad mode (100Khz) */
+};
+
+static struct ocp_func_iic_data amc440spe_iic1_def = {
+	.fast_mode	= 0,		/* Use standad mode (100Khz) */
+};
+OCP_SYSFS_IIC_DATA()
+
+struct ocp_def core_ocp[] = {
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_OPB,
+	  .index	= 0,
+	  .paddr	= 0x0000000140000000ULL,
+	  .irq		= OCP_IRQ_NA,
+	  .pm		= OCP_CPM_NA,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_16550,
+	  .index	= 0,
+	  .paddr	= PPC440SPE_UART0_ADDR,
+	  .irq		= UART0_INT,
+	  .pm		= IBM_CPM_UART0,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_16550,
+	  .index	= 1,
+	  .paddr	= PPC440SPE_UART1_ADDR,
+	  .irq		= UART1_INT,
+	  .pm		= IBM_CPM_UART1,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_16550,
+	  .index	= 2,
+	  .paddr	= PPC440SPE_UART2_ADDR,
+	  .irq		= UART2_INT,
+	  .pm		= IBM_CPM_UART2,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_IIC,
+	  .index	= 0,
+	  .paddr	= 0x00000001f0000400ULL,
+	  .irq		= 2,
+	  .pm		= IBM_CPM_IIC0,
+	  .additions	= &amc440spe_iic0_def,
+	  .show		= &ocp_show_iic_data
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_IIC,
+	  .index	= 1,
+	  .paddr	= 0x00000001f0000500ULL,
+	  .irq		= 3,
+	  .pm		= IBM_CPM_IIC1,
+	  .additions	= &amc440spe_iic1_def,
+	  .show		= &ocp_show_iic_data
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_GPIO,
+	  .index	= 0,
+	  .paddr	= 0x00000001f0000700ULL,
+	  .irq		= OCP_IRQ_NA,
+	  .pm		= IBM_CPM_GPIO0,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_MAL,
+	  .paddr	= OCP_PADDR_NA,
+	  .irq		= OCP_IRQ_NA,
+	  .pm		= OCP_CPM_NA,
+	  .additions	= &amc440spe_mal0_def,
+	  .show		= &ocp_show_mal_data,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_EMAC,
+	  .index	= 0,
+	  .paddr	= 0x00000004f0000800ULL,
+	  .irq		= 60,
+	  .pm		= OCP_CPM_NA,
+	  .additions	= &amc440spe_emac0_def,
+	  .show		= &ocp_show_emac_data,
+	},
+	{ .vendor	= OCP_VENDOR_INVALID
+	}
+};
diff --git a/arch/ppc/platforms/4xx/amcc440spe.h b/arch/ppc/platforms/4xx/amcc440spe.h
new file mode 100644
--- /dev/null
+++ b/arch/ppc/platforms/4xx/amcc440spe.h
@@ -0,0 +1,64 @@
+/*
+ * arch/ppc/platforms/4xx/ibm440sp.h
+ *
+ * PPC440SP definitions
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * Copyright 2004-2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifdef __KERNEL__
+#ifndef __PPC_PLATFORMS_AMCC440SPE_H
+#define __PPC_PLATFORMS_AMCC440SPE_H
+
+#include <linux/config.h>
+
+#include <asm/ibm44x.h>
+
+/* UART */
+#define PPC440SPE_UART0_ADDR	0x00000004f0000200ULL
+#define PPC440SPE_UART1_ADDR	0x00000004f0000300ULL
+#define PPC440SPE_UART2_ADDR	0x00000004f0000600ULL
+#define UART0_INT		0
+#define UART1_INT		1
+#define UART2_INT		37
+
+/* Clock and Power Management */
+#define IBM_CPM_IIC0		0x80000000	/* IIC interface */
+#define IBM_CPM_IIC1		0x40000000	/* IIC interface */
+#define IBM_CPM_PCI		0x20000000	/* PCI bridge */
+#define IBM_CPM_CPU		    0x02000000	/* processor core */
+#define IBM_CPM_DMA		    0x01000000	/* DMA controller */
+#define IBM_CPM_BGO		    0x00800000	/* PLB to OPB bus arbiter */
+#define IBM_CPM_BGI		    0x00400000	/* OPB to PLB bridge */
+#define IBM_CPM_EBC		    0x00200000	/* External Bux Controller */
+#define IBM_CPM_EBM		    0x00100000	/* Ext Bus Master Interface */
+#define IBM_CPM_DMC		    0x00080000	/* SDRAM peripheral controller */
+#define IBM_CPM_PLB		    0x00040000	/* PLB bus arbiter */
+#define IBM_CPM_SRAM		0x00020000	/* SRAM memory controller */
+#define IBM_CPM_PPM		    0x00002000	/* PLB Performance Monitor */
+#define IBM_CPM_UIC1		0x00001000	/* Universal Interrupt Controller */
+#define IBM_CPM_GPIO0		0x00000800	/* General Purpose IO (??) */
+#define IBM_CPM_GPT		    0x00000400	/* General Purpose Timers  */
+#define IBM_CPM_UART0		0x00000200	/* serial port 0 */
+#define IBM_CPM_UART1		0x00000100	/* serial port 1 */
+#define IBM_CPM_UART2		0x00000100	/* serial port 1 */
+#define IBM_CPM_UIC0		0x00000080	/* Universal Interrupt Controller */
+#define IBM_CPM_TMRCLK		0x00000040	/* CPU timers */
+#define IBM_CPM_EMAC0  		0x00000020	/* EMAC 0     */
+
+#define DFLT_IBM4xx_PM		~(IBM_CPM_UIC | IBM_CPM_UIC1 | IBM_CPM_CPU \
+				| IBM_CPM_EBC | IBM_CPM_SRAM | IBM_CPM_BGO \
+				| IBM_CPM_EBM | IBM_CPM_PLB | IBM_CPM_OPB \
+				| IBM_CPM_TMRCLK | IBM_CPM_DMA | IBM_CPM_PCI \
+				| IBM_CPM_TAHOE0 | IBM_CPM_TAHOE1 \
+				| IBM_CPM_EMAC0 | IBM_CPM_EMAC1 \
+			  	| IBM_CPM_EMAC2 | IBM_CPM_EMAC3 )
+#endif /* __PPC_PLATFORMS_AMCC440SP_H */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_440EP)		+= ibm440gx_common.
 obj-$(CONFIG_440GP)		+= ibm440gp_common.o
 obj-$(CONFIG_440GX)		+= ibm440gx_common.o
 obj-$(CONFIG_440SP)		+= ibm440gx_common.o ibm440sp_common.o
+obj-$(CONFIG_440SPE)		+= ibm440gx_common.o ibm440sp_common.o
 ifeq ($(CONFIG_4xx),y)
 ifeq ($(CONFIG_VIRTEX_II_PRO),y)
 obj-$(CONFIG_40x)		+= xilinx_pic.o
diff --git a/arch/ppc/syslib/ibm440sp_common.c b/arch/ppc/syslib/ibm440sp_common.c
--- a/arch/ppc/syslib/ibm440sp_common.c
+++ b/arch/ppc/syslib/ibm440sp_common.c
@@ -1,7 +1,7 @@
 /*
  * arch/ppc/syslib/ibm440sp_common.c
  *
- * PPC440SP system library
+ * PPC440SP/PPC440SPe system library
  *
  * Matt Porter <mporter@kernel.crashing.org>
  * Copyright 2002-2005 MontaVista Software Inc.
@@ -35,7 +35,7 @@ unsigned long __init ibm440sp_find_end_o
 	u32 mem_size = 0;
 
 	/* Read two bank sizes and sum */
-	for (i=0; i<2; i++)
+	for (i=0; i< MQ0_NUM_BANKS; i++)
 		switch (mfdcr(DCRN_MQ0_BS0BAS + i) & MQ0_CONFIG_SIZE_MASK) {
 			case MQ0_CONFIG_SIZE_8M:
 				mem_size += PPC44x_MEM_SIZE_8M;
diff --git a/arch/ppc/syslib/ppc4xx_pic.c b/arch/ppc/syslib/ppc4xx_pic.c
--- a/arch/ppc/syslib/ppc4xx_pic.c
+++ b/arch/ppc/syslib/ppc4xx_pic.c
@@ -37,6 +37,7 @@ extern unsigned char ppc4xx_uic_ext_irq_
 #define IRQ_MASK_UICx(irq)		(1 << (31 - ((irq) & 0x1f)))
 #define IRQ_MASK_UIC1(irq)		IRQ_MASK_UICx(irq)
 #define IRQ_MASK_UIC2(irq)		IRQ_MASK_UICx(irq)
+#define IRQ_MASK_UIC3(irq)		IRQ_MASK_UICx(irq)
 
 #define UIC_HANDLERS(n)							\
 static void ppc4xx_uic##n##_enable(unsigned int irq)			\
@@ -87,7 +88,39 @@ static void ppc4xx_uic##n##_end(unsigned
 	.end 		= ppc4xx_uic##n##_end,				\
 }									\
 
-#if NR_UICS == 3
+#if NR_UICS == 4
+#define ACK_UIC0_PARENT
+#define ACK_UIC1_PARENT	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC);
+#define ACK_UIC2_PARENT	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC2NC);
+#define ACK_UIC3_PARENT	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC3NC);
+UIC_HANDLERS(0);
+UIC_HANDLERS(1);
+UIC_HANDLERS(2);
+UIC_HANDLERS(3);
+
+static int ppc4xx_pic_get_irq(struct pt_regs *regs)
+{
+	u32 uic0 = mfdcr(DCRN_UIC_MSR(UIC0));
+	if (uic0 & UIC0_UIC1NC)
+		return 64 - ffs(mfdcr(DCRN_UIC_MSR(UIC1)));
+	else if (uic0 & UIC0_UIC2NC)
+		return 96 - ffs(mfdcr(DCRN_UIC_MSR(UIC2)));
+	else if (uic0 & UIC0_UIC2NC)
+		return 128 - ffs(mfdcr(DCRN_UIC_MSR(UIC3)));
+	else
+		return uic0 ? 32 - ffs(uic0) : -1;
+}
+
+static void __init ppc4xx_pic_impl_init(void)
+{
+	/* Enable cascade interrupts in UIC0 */
+	/* Enable cascade interrupt in UIC0 */
+	ppc_cached_irq_mask[0] |= UIC0_UIC1NC | UIC0_UIC2NC | UIC0_UIC3NC;
+	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC | UIC0_UIC2NC | UIC0_UIC3NC);
+	mtdcr(DCRN_UIC_ER(UIC0), ppc_cached_irq_mask[0]);
+}
+
+#elif NR_UICS == 3
 #define ACK_UIC0_PARENT	mtdcr(DCRN_UIC_SR(UICB), UICB_UIC0NC);
 #define ACK_UIC1_PARENT	mtdcr(DCRN_UIC_SR(UICB), UICB_UIC1NC);
 #define ACK_UIC2_PARENT	mtdcr(DCRN_UIC_SR(UICB), UICB_UIC2NC);
@@ -169,6 +202,9 @@ static struct ppc4xx_uic_impl {
 	{ .decl = DECLARE_UIC(1), .base = UIC1 },
 #if NR_UICS > 2
 	{ .decl = DECLARE_UIC(2), .base = UIC2 },
+#if NR_UICS > 3
+	{ .decl = DECLARE_UIC(3), .base = UIC3 },
+#endif
 #endif
 #endif
 };
diff --git a/include/asm-ppc/ibm44x.h b/include/asm-ppc/ibm44x.h
--- a/include/asm-ppc/ibm44x.h
+++ b/include/asm-ppc/ibm44x.h
@@ -41,6 +41,9 @@
 #if defined(CONFIG_440SP)
 #define UART0_PHYS_ERPN		1
 #define UART0_PHYS_IO_BASE	0xf0000200
+#elif defined(CONFIG_440SPE)
+#define UART0_PHYS_ERPN		4
+#define UART0_PHYS_IO_BASE	0xf0000200
 #elif defined(CONFIG_440EP)
 #define UART0_PHYS_IO_BASE	0xe0000000
 #else
@@ -76,7 +79,7 @@
 /*
  * 36-bit trap ranges
  */
-#if defined(CONFIG_440SP)
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
 #define PPC44x_IO_LO		0xf0000000UL
 #define PPC44x_IO_HI		0xf0000fffUL
 #define PPC44x_PCI0CFG_LO	0x0ec00000UL
@@ -114,7 +117,7 @@
  */
 
 
-/* CPRs (440GX and 440SP) */
+/* CPRs (440GX and 440SP/440SPe) */
 #define DCRN_CPR_CONFIG_ADDR	0xc
 #define DCRN_CPR_CONFIG_DATA	0xd
 
@@ -135,7 +138,7 @@
 	mtdcr(DCRN_CPR_CONFIG_ADDR, offset); \
 	mtdcr(DCRN_CPR_CONFIG_DATA, data);})
 
-/* SDRs (440GX and 440SP) */
+/* SDRs (440GX and 440SP/440SPe) */
 #define DCRN_SDR_CONFIG_ADDR 	0xe
 #define DCRN_SDR_CONFIG_DATA	0xf
 #define DCRN_SDR_PFC0		0x4100
@@ -185,7 +188,7 @@
 	mtdcr(DCRN_SDR_CONFIG_ADDR, offset); \
 	mtdcr(DCRN_SDR_CONFIG_DATA,data);})
 
-/* DMA (excluding 440SP) */
+/* DMA (excluding 440SP/440SPe) */
 #define DCRN_DMA0_BASE		0x100
 #define DCRN_DMA1_BASE		0x108
 #define DCRN_DMA2_BASE		0x110
@@ -205,12 +208,20 @@
 /* UIC */
 #define DCRN_UIC0_BASE	0xc0
 #define DCRN_UIC1_BASE	0xd0
-#define DCRN_UIC2_BASE	0x210
-#define DCRN_UICB_BASE	0x200
 #define UIC0		DCRN_UIC0_BASE
 #define UIC1		DCRN_UIC1_BASE
+
+#ifdef CONFIG_440SPE
+#define DCRN_UIC2_BASE	0xe0
+#define DCRN_UIC3_BASE	0xf0
+#define UIC2		DCRN_UIC2_BASE
+#define UIC3		DCRN_UIC3_BASE
+#else
+#define DCRN_UIC2_BASE	0x210
+#define DCRN_UICB_BASE	0x200
 #define UIC2		DCRN_UIC2_BASE
 #define UICB		DCRN_UICB_BASE
+#endif
 
 #define DCRN_UIC_SR(base)       (base + 0x0)
 #define DCRN_UIC_ER(base)       (base + 0x2)
@@ -223,6 +234,12 @@
 
 #define UIC0_UIC1NC      	0x00000002
 
+#ifdef CONFIG_440SPE
+#define UIC0_UIC1NC      0x00000002
+#define UIC0_UIC2NC      0x00008000
+#define UIC0_UIC3NC      0x00200000
+#endif
+
 #define UICB_UIC0NC		0x40000000
 #define UICB_UIC1NC		0x10000000
 #define UICB_UIC2NC		0x04000000
@@ -412,9 +429,13 @@
 #define PPC44x_MEM_SIZE_1G		0x40000000
 #define PPC44x_MEM_SIZE_2G		0x80000000
 
-/* 440SP memory controller DCRs */
+/* 440SP/440SPe memory controller DCRs */
 #define DCRN_MQ0_BS0BAS			0x40
-#define DCRN_MQ0_BS1BAS			0x41
+#if defined(CONFIG_440SP)
+#define MQ0_NUM_BANKS			2
+#elif defined(CONFIG_440SPE)
+#define MQ0_NUM_BANKS			4
+#endif
 
 #define MQ0_CONFIG_SIZE_MASK		0x0000fff0
 #define MQ0_CONFIG_SIZE_8M		0x0000ffc0
@@ -426,8 +447,9 @@
 #define MQ0_CONFIG_SIZE_512M		0x0000f000
 #define MQ0_CONFIG_SIZE_1G		0x0000e000
 #define MQ0_CONFIG_SIZE_2G		0x0000c000
+#define MQ0_CONFIG_SIZE_4G		0x00008000
 
-/* Internal SRAM Controller 440GX/440SP */
+/* Internal SRAM Controller 440GX/440SP/440SPe */
 #define DCRN_SRAM0_BASE		0x000
 
 #define DCRN_SRAM0_SB0CR	(DCRN_SRAM0_BASE + 0x020)
@@ -451,7 +473,7 @@
 #define DCRN_SRAM0_DPC		(DCRN_SRAM0_BASE + 0x02a)
 #define  SRAM_DPC_ENABLE	0x80000000
 
-/* L2 Cache Controller 440GX/440SP */
+/* L2 Cache Controller 440GX/440SP/440SPe */
 #define DCRN_L2C0_CFG		0x030
 #define  L2C_CFG_L2M		0x80000000
 #define  L2C_CFG_ICU		0x40000000

[PATCH 3/4] [PPC32] ibm_emac: Add 440SPe support

[Roland Dreier]

Eugene, I'm not sure what the status of your ibm_emac rewrite is.  Is
there a tree somewhere that you would like me to merge this change
with and then send you a patch, or do you want to take care of merging?


For some reason, the hardware designers made the polarity of one bit
in the 440SPe's PHY interface register the opposite of all other PPC
440 chips.  To handle this, abstract our access to this bit into
emac_phy_start() and emac_phy_done() functions, and do the right thing
based on the configured CPU type.

Signed-off-by: Roland Dreier <rolandd@cisco.com>

---

 drivers/net/ibm_emac/ibm_emac.h      |    2 -
 drivers/net/ibm_emac/ibm_emac_core.c |   72 ++++++++++++++++++++++++++--------
 2 files changed, 55 insertions(+), 19 deletions(-)

187bfbe2d410e5a229fb828e2c3dd0a8045857e8
diff --git a/drivers/net/ibm_emac/ibm_emac.h b/drivers/net/ibm_emac/ibm_emac.h
--- a/drivers/net/ibm_emac/ibm_emac.h
+++ b/drivers/net/ibm_emac/ibm_emac.h
@@ -237,7 +237,7 @@ typedef struct emac_regs {
 #define EMAC_RWMR_DEFAULT		0x1000a200
 #define EMAC_TMR0_DEFAULT		EMAC_TMR0_TFAE_2_32
 #define EMAC_TMR1_DEFAULT		0xa00f0000
-#elif defined(CONFIG_440SP)
+#elif defined(CONFIG_440SP) || defined(CONFIG_440SPE)
 #define EMAC_RWMR_DEFAULT		0x08002000
 #define EMAC_TMR0_DEFAULT		EMAC_TMR0_TFAE_128_2048
 #define EMAC_TMR1_DEFAULT		0xf8200000
diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c
--- a/drivers/net/ibm_emac/ibm_emac_core.c
+++ b/drivers/net/ibm_emac/ibm_emac_core.c
@@ -160,6 +160,34 @@ static struct net_device_stats *emac_sta
 	return &fep->stats;
 };
 
+/*
+ * For the 440SPe, AMCC inexplicably changed the polarity of
+ * the "operation complete" bit in the MII control register.
+ */
+#ifdef CONFIG_440SPE
+static inline int emac_phy_done(uint32_t stacr)
+{
+	return !(stacr & EMAC_STACR_OC);
+};
+
+static inline uint32_t emac_phy_start(uint32_t stacr)
+{
+	return stacr | EMAC_STACR_OC;
+};
+
+#else /* CONFIG_440SPE */
+
+static inline int emac_phy_done(uint32_t stacr)
+{
+	return stacr & EMAC_STACR_OC;
+};
+
+static inline uint32_t emac_phy_start(uint32_t stacr)
+{
+	return stacr;
+};
+#endif /* CONFIG_440SPE */
+
 static int
 emac_init_rgmii(struct ocp_device *rgmii_dev, int input, int phy_mode)
 {
@@ -397,13 +425,15 @@ int emac_phy_read(struct net_device *dev
 		emacp = fep->emacp;
 	}
 
-	count = 0;
-	while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0)
-					&& (count++ < MDIO_DELAY))
+	for (count = 0; count < MDIO_DELAY; ++count) {
+		stacr = in_be32(&emacp->em0stacr);
+		if (emac_phy_done(stacr))
+			break;
 		udelay(1);
+	}
 	MDIO_DEBUG((" (count was %d)\n", count));
 
-	if ((stacr & EMAC_STACR_OC) == 0) {
+	if (!emac_phy_done(stacr)) {
 		printk(KERN_WARNING "%s: PHY read timeout #1!\n", dev->name);
 		return -1;
 	}
@@ -412,15 +442,17 @@ int emac_phy_read(struct net_device *dev
 	stacr = ((EMAC_STACR_READ | (reg & 0x1f)) & ~EMAC_STACR_CLK_100MHZ);
 	stacr |= ((mii_id & 0x1F) << 5);
 
-	out_be32(&emacp->em0stacr, stacr);
+	out_be32(&emacp->em0stacr, emac_phy_start(stacr));
 
-	count = 0;
-	while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0)
-					&& (count++ < MDIO_DELAY))
+	for (count = 0; count < MDIO_DELAY; ++count) {
+		stacr = in_be32(&emacp->em0stacr);
+		if (emac_phy_done(stacr))
+			break;
 		udelay(1);
+	}
 	MDIO_DEBUG((" (count was %d)\n", count));
 
-	if ((stacr & EMAC_STACR_OC) == 0) {
+	if (!emac_phy_done(stacr)) {
 		printk(KERN_WARNING "%s: PHY read timeout #2!\n", dev->name);
 		return -1;
 	}
@@ -457,13 +489,15 @@ void emac_phy_write(struct net_device *d
 		emacp = fep->emacp;
 	}
 
-	count = 0;
-	while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0)
-					&& (count++ < MDIO_DELAY))
+	for (count = 0; count < MDIO_DELAY; ++count) {
+		stacr = in_be32(&emacp->em0stacr);
+		if (emac_phy_done(stacr))
+			break;
 		udelay(1);
+	}
 	MDIO_DEBUG((" (count was %d)\n", count));
 
-	if ((stacr & EMAC_STACR_OC) == 0) {
+	if (!emac_phy_done(stacr)) {
 		printk(KERN_WARNING "%s: PHY write timeout #2!\n", dev->name);
 		return;
 	}
@@ -473,15 +507,17 @@ void emac_phy_write(struct net_device *d
 	stacr = ((EMAC_STACR_WRITE | (reg & 0x1f)) & ~EMAC_STACR_CLK_100MHZ);
 	stacr |= ((mii_id & 0x1f) << 5) | ((data & 0xffff) << 16);
 
-	out_be32(&emacp->em0stacr, stacr);
+	out_be32(&emacp->em0stacr, emac_phy_start(stacr));
 
-	count = 0;
-	while ((((stacr = in_be32(&emacp->em0stacr)) & EMAC_STACR_OC) == 0)
-					&& (count++ < MDIO_DELAY))
+	for (count = 0; count < MDIO_DELAY; ++count) {
+		stacr = in_be32(&emacp->em0stacr);
+		if (emac_phy_done(stacr))
+			break;
 		udelay(1);
+	}
 	MDIO_DEBUG((" (count was %d)\n", count));
 
-	if ((stacr & EMAC_STACR_OC) == 0)
+	if (!emac_phy_done(stacr))
 		printk(KERN_WARNING "%s: PHY write timeout #2!\n", dev->name);
 
 	/* Check for a write error */

[PATCH 4/4] [PPC32] Add Yucca (440SPe eval board) platform

[Roland Dreier]

Add support for AMCC PowerPC 440SPe "Yucca" eval board platform.

Signed-off-by: Roland Dreier <rolandd@cisco.com>

---

 arch/ppc/boot/simple/Makefile   |    6 +
 arch/ppc/platforms/4xx/Kconfig  |   11 +-
 arch/ppc/platforms/4xx/Makefile |    1 
 arch/ppc/platforms/4xx/yucca.c  |  286 +++++++++++++++++++++++++++++++++++++++
 arch/ppc/platforms/4xx/yucca.h  |  115 ++++++++++++++++
 include/asm-ppc/ibm4xx.h        |    4 +
 6 files changed, 421 insertions(+), 2 deletions(-)
 create mode 100644 arch/ppc/platforms/4xx/yucca.c
 create mode 100644 arch/ppc/platforms/4xx/yucca.h

542fc1a61c8a721ee4c894ca961d8242d20e813a
diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile
--- a/arch/ppc/boot/simple/Makefile
+++ b/arch/ppc/boot/simple/Makefile
@@ -79,6 +79,12 @@ zimageinitrd-$(CONFIG_LUAN)		:= zImage.i
   entrypoint-$(CONFIG_LUAN)		:= 0x01000000
      extra.o-$(CONFIG_LUAN)		:= pibs.o
 
+      zimage-$(CONFIG_YUCCA)		:= zImage-TREE
+zimageinitrd-$(CONFIG_YUCCA)		:= zImage.initrd-TREE
+         end-$(CONFIG_YUCCA)		:= yucca
+  entrypoint-$(CONFIG_YUCCA)		:= 0x01000000
+     extra.o-$(CONFIG_YUCCA)		:= pibs.o
+
       zimage-$(CONFIG_OCOTEA)		:= zImage-TREE
 zimageinitrd-$(CONFIG_OCOTEA)		:= zImage.initrd-TREE
          end-$(CONFIG_OCOTEA)		:= ocotea
diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig
--- a/arch/ppc/platforms/4xx/Kconfig
+++ b/arch/ppc/platforms/4xx/Kconfig
@@ -82,6 +82,12 @@ config LUAN
 	help
 	  This option enables support for the IBM PPC440SP evaluation board.
 
+config YUCCA
+	bool "Yucca"
+	select WANT_EARLY_SERIAL
+	help
+	  This option enables support for the AMCC PPC440SPe evaluation board.
+
 config OCOTEA
 	bool "Ocotea"
 	select WANT_EARLY_SERIAL
@@ -126,7 +132,8 @@ config 440SP
 
 config 440SPE
 	bool
-	default n
+	depends on YUCCA
+	default y
 
 config 440
 	bool
@@ -162,7 +169,7 @@ config BOOKE
 
 config IBM_OCP
 	bool
-	depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
+	depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
 	default y
 
 config XILINX_OCP
diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile
--- a/arch/ppc/platforms/4xx/Makefile
+++ b/arch/ppc/platforms/4xx/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_EBONY)		+= ebony.o
 obj-$(CONFIG_EP405)		+= ep405.o
 obj-$(CONFIG_BUBINGA)		+= bubinga.o
 obj-$(CONFIG_LUAN)		+= luan.o
+obj-$(CONFIG_YUCCA)		+= yucca.o
 obj-$(CONFIG_OCOTEA)		+= ocotea.o
 obj-$(CONFIG_REDWOOD_5)		+= redwood5.o
 obj-$(CONFIG_REDWOOD_6)		+= redwood6.o
diff --git a/arch/ppc/platforms/4xx/yucca.c b/arch/ppc/platforms/4xx/yucca.c
new file mode 100644
--- /dev/null
+++ b/arch/ppc/platforms/4xx/yucca.c
@@ -0,0 +1,286 @@
+/*
+ * arch/ppc/platforms/4xx/yucca.c
+ *
+ * Yucca board specific routines
+ *
+ * Roland Dreier <rolandd@cisco.com> (based on yucca.c by Matt Porter)
+ *
+ * Copyright 2004-2005 MontaVista Software Inc.
+ * Copyright (c) 2005 Cisco Systems.  All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/types.h>
+#include <linux/major.h>
+#include <linux/blkdev.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/ide.h>
+#include <linux/initrd.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ocp.h>
+#include <asm/pci-bridge.h>
+#include <asm/time.h>
+#include <asm/todc.h>
+#include <asm/bootinfo.h>
+#include <asm/ppc4xx_pic.h>
+#include <asm/ppcboot.h>
+
+#include <syslib/ibm44x_common.h>
+#include <syslib/ibm440gx_common.h>
+#include <syslib/ibm440sp_common.h>
+
+/*
+ * This is a horrible kludge, we eventually need to abstract this
+ * generic PHY stuff, so the  standard phy mode defines can be
+ * easily used from arch code.
+ */
+#include "../../../../drivers/net/ibm_emac/ibm_emac_phy.h"
+
+bd_t __res;
+
+static struct ibm44x_clocks clocks __initdata;
+
+static void __init
+yucca_calibrate_decr(void)
+{
+	unsigned int freq;
+
+	if (mfspr(SPRN_CCR1) & CCR1_TCS)
+		freq = YUCCA_TMR_CLK;
+	else
+		freq = clocks.cpu;
+
+	ibm44x_calibrate_decr(freq);
+}
+
+static int
+yucca_show_cpuinfo(struct seq_file *m)
+{
+	seq_printf(m, "vendor\t\t: AMCC\n");
+	seq_printf(m, "machine\t\t: PPC440SPe EVB (Yucca)\n");
+
+	return 0;
+}
+
+static inline int
+yucca_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+	struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
+
+	/* PCIX */
+	if (hose->index == 3) {
+		static char pci_irq_table[][4] =
+		/*
+		 *	PCI IDSEL/INTPIN->INTLINE
+		 *	  A   B   C   D
+		 */
+		{
+			{ 81, -1, -1, -1 },	/* IDSEL 1 - PCIX0 Slot 0 */
+		};
+		const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4;
+		return PCI_IRQ_TABLE_LOOKUP;
+	/* PCIE0 */
+	} else if (hose->index == 0) {
+		static char pci_irq_table[][4] =
+		/*
+		 *	PCI IDSEL/INTPIN->INTLINE
+		 *	  A   B   C   D
+		 */
+		{
+			{ 96, 97, 98, 99 },
+		};
+		const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4;
+		return PCI_IRQ_TABLE_LOOKUP;
+	/* PCIE1 */
+	} else if (hose->index == 1) {
+		static char pci_irq_table[][4] =
+		/*
+		 *	PCI IDSEL/INTPIN->INTLINE
+		 *	  A   B   C   D
+		 */
+		{
+			{ 100, 101, 102, 103 },
+		};
+		const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4;
+		return PCI_IRQ_TABLE_LOOKUP;
+	/* PCIE2 */
+	} else if (hose->index == 2) {
+		static char pci_irq_table[][4] =
+		/*
+		 *	PCI IDSEL/INTPIN->INTLINE
+		 *	  A   B   C   D
+		 */
+		{
+			{ 104, 105, 106, 107 },
+		};
+		const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4;
+		return PCI_IRQ_TABLE_LOOKUP;
+	}
+	return -1;
+}
+
+static void __init yucca_set_emacdata(void)
+{
+	struct ocp_def *def;
+	struct ocp_func_emac_data *emacdata;
+
+	/* Set phy_map, phy_mode, and mac_addr for the EMAC */
+	def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0);
+	emacdata = def->additions;
+	emacdata->phy_map = 0x00000001;	/* Skip 0x00 */
+	emacdata->phy_mode = PHY_MODE_GMII;
+	memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
+}
+
+static void __init
+yucca_setup_hoses(void)
+{
+
+}
+
+TODC_ALLOC();
+
+static void __init
+yucca_early_serial_map(void)
+{
+	struct uart_port port;
+
+	/* Setup ioremapped serial port access */
+	memset(&port, 0, sizeof(port));
+	port.membase = ioremap64(PPC440SPE_UART0_ADDR, 8);
+	port.irq = UART0_INT;
+	port.uartclk = clocks.uart0;
+	port.regshift = 0;
+	port.iotype = SERIAL_IO_MEM;
+	port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+	port.line = 0;
+
+	if (early_serial_setup(&port) != 0) {
+		printk("Early serial init of port 0 failed\n");
+	}
+
+	port.membase = ioremap64(PPC440SPE_UART1_ADDR, 8);
+	port.irq = UART1_INT;
+	port.uartclk = clocks.uart1;
+	port.line = 1;
+
+	if (early_serial_setup(&port) != 0) {
+		printk("Early serial init of port 1 failed\n");
+	}
+
+	port.membase = ioremap64(PPC440SPE_UART2_ADDR, 8);
+	port.irq = UART2_INT;
+	port.uartclk = BASE_BAUD;
+	port.line = 2;
+
+	if (early_serial_setup(&port) != 0) {
+		printk("Early serial init of port 2 failed\n");
+	}
+}
+
+static void __init
+yucca_setup_arch(void)
+{
+	yucca_set_emacdata();
+
+#if !defined(CONFIG_BDI_SWITCH)
+	/*
+	 * The Abatron BDI JTAG debugger does not tolerate others
+	 * mucking with the debug registers.
+	 */
+        mtspr(SPRN_DBCR0, (DBCR0_TDE | DBCR0_IDM));
+#endif
+
+	/*
+	 * Determine various clocks.
+	 * To be completely correct we should get SysClk
+	 * from FPGA, because it can be changed by on-board switches
+	 * --ebs
+	 */
+	/* 440GX and 440SP clocking is the same -mdp */
+	ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200);
+	ocp_sys_info.opb_bus_freq = clocks.opb;
+
+	/* init to some ~sane value until calibrate_delay() runs */
+        loops_per_jiffy = 50000000/HZ;
+
+	/* Setup PCIXn host bridges */
+	yucca_setup_hoses();
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (initrd_start)
+		ROOT_DEV = Root_RAM0;
+	else
+#endif
+#ifdef CONFIG_ROOT_NFS
+		ROOT_DEV = Root_NFS;
+#else
+		ROOT_DEV = Root_HDA1;
+#endif
+
+	yucca_early_serial_map();
+
+	/* Identify the system */
+	printk("Yucca port (Roland Dreier <rolandd@cisco.com>)\n");
+}
+
+void __init platform_init(unsigned long r3, unsigned long r4,
+		unsigned long r5, unsigned long r6, unsigned long r7)
+{
+	parse_bootinfo(find_bootinfo());
+
+	/*
+	 * If we were passed in a board information, copy it into the
+	 * residual data area.
+	 */
+	if (r3)
+		__res = *(bd_t *)(r3 + KERNELBASE);
+
+#if defined(CONFIG_BLK_DEV_INITRD)
+	/*
+	 * If the init RAM disk has been configured in, and there's a valid
+	 * starting address for it, set it up.
+	 */
+	if (r4) {
+		initrd_start = r4 + KERNELBASE;
+		initrd_end = r5 + KERNELBASE;
+	}
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+	ibm44x_platform_init();
+
+	ppc_md.setup_arch = yucca_setup_arch;
+	ppc_md.show_cpuinfo = yucca_show_cpuinfo;
+	ppc_md.find_end_of_memory = ibm440sp_find_end_of_memory;
+	ppc_md.get_irq = NULL;		/* Set in ppc4xx_pic_init() */
+
+	ppc_md.calibrate_decr = yucca_calibrate_decr;
+#ifdef CONFIG_KGDB
+	ppc_md.early_serial_map = yucca_early_serial_map;
+#endif
+}
diff --git a/arch/ppc/platforms/4xx/yucca.h b/arch/ppc/platforms/4xx/yucca.h
new file mode 100644
--- /dev/null
+++ b/arch/ppc/platforms/4xx/yucca.h
@@ -0,0 +1,115 @@
+/*
+ * arch/ppc/platforms/4xx/yucca.h
+ *
+ * Yucca board definitions
+ *
+ * Roland Dreier <rolandd@cisco.com> (based on luan.h by Matt Porter)
+ *
+ * Copyright 2004-2005 MontaVista Software Inc.
+ * Copyright (c) 2005 Cisco Systems.  All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_YUCCA_H__
+#define __ASM_YUCCA_H__
+
+#include <linux/config.h>
+#include <platforms/4xx/amcc440spe.h>
+
+/* F/W TLB mapping used in bootloader glue to reset EMAC */
+#define PPC44x_EMAC0_MR0	0xa0000800
+
+/* Location of MAC addresses in PIBS image */
+#define PIBS_FLASH_BASE		0xffe00000
+#define PIBS_MAC_BASE		(PIBS_FLASH_BASE+0x1b0400)
+
+/* External timer clock frequency */
+#define YUCCA_TMR_CLK		25000000
+
+/*
+ * FPGA registers
+ */
+#define YUCCA_FPGA_REG_BASE			0x00000004e2000000ULL
+#define YUCCA_FPGA_REG_SIZE			0x24
+
+#define FPGA_REG1A				0x1a
+
+#define FPGA_REG1A_PE0_GLED			0x8000
+#define FPGA_REG1A_PE1_GLED			0x4000
+#define FPGA_REG1A_PE2_GLED			0x2000
+#define FPGA_REG1A_PE0_YLED			0x1000
+#define FPGA_REG1A_PE1_YLED			0x0800
+#define FPGA_REG1A_PE2_YLED			0x0400
+#define FPGA_REG1A_PE0_PWRON			0x0200
+#define FPGA_REG1A_PE1_PWRON			0x0100
+#define FPGA_REG1A_PE2_PWRON			0x0080
+#define FPGA_REG1A_PE0_REFCLK_ENABLE		0x0040
+#define FPGA_REG1A_PE1_REFCLK_ENABLE		0x0020
+#define FPGA_REG1A_PE2_REFCLK_ENABLE		0x0010
+#define FPGA_REG1A_PE_SPREAD0			0x0008
+#define FPGA_REG1A_PE_SPREAD1			0x0004
+#define FPGA_REG1A_PE_SELSOURCE_0		0x0002
+#define FPGA_REG1A_PE_SELSOURCE_1		0x0001
+
+#define FPGA_REG1C				0x1c
+
+#define FPGA_REG1C_PE0_ROOTPOINT		0x8000
+#define FPGA_REG1C_PE1_ENDPOINT			0x4000
+#define FPGA_REG1C_PE2_ENDPOINT			0x2000
+#define FPGA_REG1C_PE0_PRSNT			0x1000
+#define FPGA_REG1C_PE1_PRSNT			0x0800
+#define FPGA_REG1C_PE2_PRSNT			0x0400
+#define FPGA_REG1C_PE0_WAKE			0x0080
+#define FPGA_REG1C_PE1_WAKE			0x0040
+#define FPGA_REG1C_PE2_WAKE			0x0020
+#define FPGA_REG1C_PE0_PERST			0x0010
+#define FPGA_REG1C_PE1_PERST			0x0008
+#define FPGA_REG1C_PE2_PERST			0x0004
+
+/*
+ * Serial port defines
+ */
+#define RS_TABLE_SIZE	3
+
+/* PIBS defined UART mappings, used before early_serial_setup */
+#define UART0_IO_BASE	0xa0000200
+#define UART1_IO_BASE	0xa0000300
+#define UART2_IO_BASE	0xa0000600
+
+#define BASE_BAUD	11059200
+#define STD_UART_OP(num)					\
+	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
+		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
+		iomem_base: UART##num##_IO_BASE,		\
+		io_type: SERIAL_IO_MEM},
+
+#define SERIAL_PORT_DFNS	\
+	STD_UART_OP(0)		\
+	STD_UART_OP(1)		\
+	STD_UART_OP(2)
+
+/* PCI support */
+#define YUCCA_PCIX_LOWER_IO	0x00000000
+#define YUCCA_PCIX_UPPER_IO	0x0000ffff
+#define YUCCA_PCIX_LOWER_MEM	0x80000000
+#define YUCCA_PCIX_UPPER_MEM	0x8fffffff
+#define YUCCA_PCIE0_LOWER_MEM	0x90000000
+#define YUCCA_PCIE0_UPPER_MEM	0x9fffffff
+#define YUCCA_PCIE1_LOWER_MEM	0xa0000000
+#define YUCCA_PCIE1_UPPER_MEM	0xafffffff
+#define YUCCA_PCIE2_LOWER_MEM	0xb0000000
+#define YUCCA_PCIE2_UPPER_MEM	0xbfffffff
+
+#define YUCCA_PCIX_MEM_SIZE	0x10000000
+#define YUCCA_PCIX_MEM_OFFSET	0x00000000
+#define YUCCA_PCIE_MEM_SIZE	0x10000000
+#define YUCCA_PCIE_MEM_OFFSET	0x00000000
+
+#endif				/* __ASM_YUCCA_H__ */
+#endif				/* __KERNEL__ */
diff --git a/include/asm-ppc/ibm4xx.h b/include/asm-ppc/ibm4xx.h
--- a/include/asm-ppc/ibm4xx.h
+++ b/include/asm-ppc/ibm4xx.h
@@ -97,6 +97,10 @@ void ppc4xx_init(unsigned long r3, unsig
 #include <platforms/4xx/luan.h>
 #endif
 
+#if defined(CONFIG_YUCCA)
+#include <platforms/4xx/yucca.h>
+#endif
+
 #if defined(CONFIG_OCOTEA)
 #include <platforms/4xx/ocotea.h>
 #endif

Re: [PATCH 4/4] [PPC32] Add Yucca (440SPe eval board) platform

[Eugene Surovegin]

On Thu, Sep 22, 2005 at 08:03:35PM -0700, Roland Dreier wrote:
> Add support for AMCC PowerPC 440SPe "Yucca" eval board platform.

[snip]

> +/*
> + * This is a horrible kludge, we eventually need to abstract this
> + * generic PHY stuff, so the  standard phy mode defines can be
> + * easily used from arch code.
> + */
> +#include "../../../../drivers/net/ibm_emac/ibm_emac_phy.h"

This is not needed anymore. Please, remove this.

-- 
Eugene

Re: [PATCH 4/4] [PPC32] Add Yucca (440SPe eval board) platform

[Roland Dreier]

    Eugene> This is not needed anymore. Please, remove this.

Done and also pushed out in the new git tree.

 - R.

Re: [PATCH 3/4] [PPC32] ibm_emac: Add 440SPe support

[Eugene Surovegin]

On Thu, Sep 22, 2005 at 08:03:35PM -0700, Roland Dreier wrote:
> Eugene, I'm not sure what the status of your ibm_emac rewrite is.  Is
> there a tree somewhere that you would like me to merge this change
> with and then send you a patch, or do you want to take care of merging?

Well, new driver was sent to jgarzik and netdev list three weeks ago. 
So far I haven't heard anything technical from Jeff. I don't know when 
and even if it will be merged.

There is a GIT tree with new driver, for more info look at 
http://kernel.ebshome.net/emac/index.html

I don't know what to recommend now - wait for net driver maintainer 
(I've heard some people have been waiting for couple months already) 
or sent this patch upstream ignoring new driver :(. Matt?

I'll try to look at merging your patch into my tree, but probably not 
right now - I'm kinda busy with other stuff and netdev "progress" 
doesn't quite motivate me working on this project, frankly. Though, if 
you can send me a patch against my tree, I'll appreciate it :).

-- 
Eugene

Re: [PATCH 3/4] [PPC32] ibm_emac: Add 440SPe support

[Roland Dreier]

    Eugene> Well, new driver was sent to jgarzik and netdev list three
    Eugene> weeks ago. So far I haven't heard anything technical from
    Eugene> Jeff. I don't know when and even if it will be merged.

Assuming everyone in the PPC4xx world thinks your driver should
replace the old driver, it might be worth sending directly to Andrew.
There's no reason Jeff has to become a bottleneck for this.

    Eugene> I'll try to look at merging your patch into my tree, but
    Eugene> probably not right now - I'm kinda busy with other stuff
    Eugene> and netdev "progress" doesn't quite motivate me working on
    Eugene> this project, frankly. Though, if you can send me a patch
    Eugene> against my tree, I'll appreciate it :).

No problem at all.  Here's a patch against your git tree -- only
tested on my Yucca board, so you might want to doublecheck that I
didn't break all the systems will the opposite polarity.

Thanks,
  Roland



For some reason, the hardware designers made the polarity of one bit
in the 440SPe's PHY interface register the opposite of all other PPC
440 chips.  To handle this, abstract our access to this bit and do the
right thing based on the configured CPU type.

Signed-off-by: Roland Dreier <rolandd@cisco.com>

diff --git a/drivers/net/ibm_emac/ibm_emac.h b/drivers/net/ibm_emac/ibm_emac.h
--- a/drivers/net/ibm_emac/ibm_emac.h
+++ b/drivers/net/ibm_emac/ibm_emac.h
@@ -26,7 +26,7 @@
 /* This is a simple check to prevent use of this driver on non-tested SoCs */
 #if !defined(CONFIG_405GP) && !defined(CONFIG_405GPR) && !defined(CONFIG_405EP) && \
     !defined(CONFIG_440GP) && !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && \
-    !defined(CONFIG_440EP) && !defined(CONFIG_NP405H)
+    !defined(CONFIG_440EP) && !defined(CONFIG_NP405H) && !defined(CONFIG_440SPE)
 #error	"Unknown SoC. Please, check chip user manual and make sure EMAC defines are OK"
 #endif
 
diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c
--- a/drivers/net/ibm_emac/ibm_emac_core.c
+++ b/drivers/net/ibm_emac/ibm_emac_core.c
@@ -139,6 +139,29 @@ static inline void EMAC_RX_CLK_DEFAULT(i
 #define EMAC_CLK_EXTERNAL		((void)0)
 #endif
 
+/*
+ * For the 440SPe, AMCC inexplicably changed the polarity of
+ * the "operation complete" bit in the MII control register.
+ */
+#ifdef CONFIG_440SPE
+static inline int emac_phy_done(uint32_t stacr)
+{
+	return !(stacr & EMAC_STACR_OC);
+};
+
+#define EMAC_STACR_START EMAC_STACR_OC
+
+#else /* CONFIG_440SPE */
+
+static inline int emac_phy_done(uint32_t stacr)
+{
+	return stacr & EMAC_STACR_OC;
+};
+
+#define EMAC_STACR_START 0
+#endif /* CONFIG_440SPE */
+
+
 /* I don't want to litter system log with timeout errors 
  * when we have brain-damaged PHY.
  */
@@ -546,7 +569,7 @@ static int __emac_mdio_read(struct ocp_e
 
 	/* Wait for management interface to become idle */
 	n = 10;
-	while (!(in_be32(&p->stacr) & EMAC_STACR_OC)) {
+	while (!emac_phy_done(in_be32(&p->stacr))) {
 		udelay(1);
 		if (!--n)
 			goto to;
@@ -556,11 +579,12 @@ static int __emac_mdio_read(struct ocp_e
 	out_be32(&p->stacr,
 		 EMAC_STACR_BASE(emac_opb_mhz()) | EMAC_STACR_STAC_READ |
 		 (reg & EMAC_STACR_PRA_MASK)
-		 | ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT));
+		 | ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT)
+		 | EMAC_STACR_START);
 
 	/* Wait for read to complete */
 	n = 100;
-	while (!((r = in_be32(&p->stacr)) & EMAC_STACR_OC)) {
+	while (!emac_phy_done(r = in_be32(&p->stacr))) {
 		udelay(1);
 		if (!--n)
 			goto to;
@@ -594,7 +618,7 @@ static void __emac_mdio_write(struct ocp
 
 	/* Wait for management interface to be idle */
 	n = 10;
-	while (!(in_be32(&p->stacr) & EMAC_STACR_OC)) {
+	while (!emac_phy_done(in_be32(&p->stacr))) {
 		udelay(1);
 		if (!--n)
 			goto to;
@@ -605,11 +629,12 @@ static void __emac_mdio_write(struct ocp
 		 EMAC_STACR_BASE(emac_opb_mhz()) | EMAC_STACR_STAC_WRITE |
 		 (reg & EMAC_STACR_PRA_MASK) |
 		 ((id & EMAC_STACR_PCDA_MASK) << EMAC_STACR_PCDA_SHIFT) |
-		 (val << EMAC_STACR_PHYD_SHIFT));
+		 (val << EMAC_STACR_PHYD_SHIFT) |
+		 EMAC_STACR_START);
 
 	/* Wait for write to complete */
 	n = 100;
-	while (!(in_be32(&p->stacr) & EMAC_STACR_OC)) {
+	while (!emac_phy_done(in_be32(&p->stacr))) {
 		udelay(1);
 		if (!--n)
 			goto to;
diff --git a/drivers/net/ibm_emac/ibm_emac_mal.h b/drivers/net/ibm_emac/ibm_emac_mal.h
--- a/drivers/net/ibm_emac/ibm_emac_mal.h
+++ b/drivers/net/ibm_emac/ibm_emac_mal.h
@@ -34,7 +34,8 @@
 #if defined(CONFIG_405GP) || defined(CONFIG_405GPR) || defined(CONFIG_405EP) || \
     defined(CONFIG_440EP) || defined(CONFIG_NP405H)
 #define MAL_VERSION		1
-#elif defined(CONFIG_440GP) || defined(CONFIG_440GX) || defined(CONFIG_440SP)
+#elif defined(CONFIG_440GP) || defined(CONFIG_440GX) || defined(CONFIG_440SP) || \
+      defined(CONFIG_440SPE)
 #define MAL_VERSION		2
 #else
 #error "Unknown SoC, please check chip manual and choose MAL 'version'"

Re: [PATCH 3/4] [PPC32] ibm_emac: Add 440SPe support

[Eugene Surovegin]

On Thu, Sep 22, 2005 at 10:25:26PM -0700, Roland Dreier wrote:
> No problem at all.  Here's a patch against your git tree -- only
> tested on my Yucca board, so you might want to doublecheck that I
> didn't break all the systems will the opposite polarity.

Thanks Roland, I've just pushed your patch with minor style changes 
to my GIT tree.

I changed uint32_t -> u32 and moved emac_phy_done() functions to 
ibm_emac.h. Booted new kernel on Ocotea and everything seems to be OK.

-- 
Eugene

Re: [PATCH 3/4] [PPC32] ibm_emac: Add 440SPe support

[Roland Dreier]

    Eugene> Booted new kernel on Ocotea and everything seems to be OK.

I tested on Yucca/440SPe and it works fine for me too.

Thanks,
  Roland

Re: [PATCH 3/4] [PPC32] ibm_emac: Add 440SPe support

[Matt Porter]

On Thu, Sep 22, 2005 at 10:25:26PM -0700, Roland Dreier wrote:
>     Eugene> Well, new driver was sent to jgarzik and netdev list three
>     Eugene> weeks ago. So far I haven't heard anything technical from
>     Eugene> Jeff. I don't know when and even if it will be merged.
> 
> Assuming everyone in the PPC4xx world thinks your driver should
> replace the old driver, it might be worth sending directly to Andrew.
> There's no reason Jeff has to become a bottleneck for this.

We're working on this. It's not exactly that simple since Jeff
established that all net drivers must enter through the netdev
tree. I expect it can get merged post 2.6.14 if all goes well.

-Matt

Re: [PATCH 3/4] [PPC32] ibm_emac: Add 440SPe support

[Roland Dreier]

    Matt> We're working on this. It's not exactly that simple since
    Matt> Jeff established that all net drivers must enter through the
    Matt> netdev tree. I expect it can get merged post 2.6.14 if all
    Matt> goes well.

Jeff may want all net drivers to go through his tree, but with all due
respect to him, there's no law that says it has to be so.

cf. Linus's recent post: http://lkml.org/lkml/2005/9/22/220

 - R.

Re: [PATCH 3/4] [PPC32] ibm_emac: Add 440SPe support

[Matt Porter]

On Fri, Sep 23, 2005 at 01:25:09PM -0700, Roland Dreier wrote:
>     Matt> We're working on this. It's not exactly that simple since
>     Matt> Jeff established that all net drivers must enter through the
>     Matt> netdev tree. I expect it can get merged post 2.6.14 if all
>     Matt> goes well.
> 
> Jeff may want all net drivers to go through his tree, but with all due
> respect to him, there's no law that says it has to be so.
> 
> cf. Linus's recent post: http://lkml.org/lkml/2005/9/22/220
 
Yep, one step at a time.  There's no rush for today or tomorrow...
nothing like this is going into the tree until post 2.6.14 anyway.

-Matt

Re: [PATCH 2/4] [PPC32] Add 440SPe support

[Eugene Surovegin]

On Thu, Sep 22, 2005 at 08:03:35PM -0700, Roland Dreier wrote:
> Add support for the AMCC PowerPC 440SPe SoC.

[snip]

> +static struct ocp_func_mal_data amc440spe_mal0_def = {
> +	.num_tx_chans   = 1,    	/* Number of TX channels */
> +	.num_rx_chans   = 1,    	/* Number of RX channels */
> +	.txeob_irq	= 38,		/* TX End Of Buffer IRQ  */
> +	.rxeob_irq	= 39,		/* RX End Of Buffer IRQ  */
> +	.txde_irq	= 34,		/* TX Descriptor Error IRQ */
> +	.rxde_irq	= 35,		/* RX Descriptor Error IRQ */
> +	.serr_irq	= 33,		/* MAL System Error IRQ    */
> +};
> +OCP_SYSFS_MAL_DATA()

Roland, I recently added new field (.dcr_base) to this structure (as a 
preparation step for new EMAC driver), could you do this for 440SPe as 
well? It's not needed right now, but as soon as new EMAC driver is in, 
440SPe will stop working.

[snip]

> +static void __init ppc4xx_pic_impl_init(void)
> +{
> +	/* Enable cascade interrupts in UIC0 */
> +	/* Enable cascade interrupt in UIC0 */

I think you probably missed this part :)

-- 
Eugene

Re: [PATCH 2/4] [PPC32] Add 440SPe support

[Roland Dreier]

    Eugene> Roland, I recently added new field (.dcr_base) to this
    Eugene> structure (as a preparation step for new EMAC driver),
    Eugene> could you do this for 440SPe as well? It's not needed
    Eugene> right now, but as soon as new EMAC driver is in, 440SPe
    Eugene> will stop working.

    Eugene> I think you probably missed this part :)

Both fixed and pushed in a new git tree...

 - R.

Re: [PATCH 2/4] [PPC32] Add 440SPe support

[Matt Porter]

On Thu, Sep 22, 2005 at 10:44:35PM -0700, Roland Dreier wrote:
>     Eugene> Roland, I recently added new field (.dcr_base) to this
>     Eugene> structure (as a preparation step for new EMAC driver),
>     Eugene> could you do this for 440SPe as well? It's not needed
>     Eugene> right now, but as soon as new EMAC driver is in, 440SPe
>     Eugene> will stop working.
> 
>     Eugene> I think you probably missed this part :)
> 
> Both fixed and pushed in a new git tree...

Can you rebase off of Eugene's tree and resend patches? For the moment
the new EMAC driver is the lynchpin in anything new PPC4xx.  I want
to hold off merging anything that involves current EMAC driver changes
until the new driver is in. In any case, nothing like this can go upstream
until after 2.6.14 is released. We are expecting the new EMAC driver to
be merged at that point.  If you have this stuff rebased from his tree
we can easily merge them post-EMAC merge.

-Matt

Re: [PATCH 2/4] [PPC32] Add 440SPe support

[Roland Dreier]

    Matt> Can you rebase off of Eugene's tree and resend patches? For
    Matt> the moment the new EMAC driver is the lynchpin in anything
    Matt> new PPC4xx.  I want to hold off merging anything that
    Matt> involves current EMAC driver changes until the new driver is
    Matt> in. In any case, nothing like this can go upstream until
    Matt> after 2.6.14 is released. We are expecting the new EMAC
    Matt> driver to be merged at that point.  If you have this stuff
    Matt> rebased from his tree we can easily merge them post-EMAC
    Matt> merge.

I've already sent patches to Eugene that are in his EMAC tree.  So his
driver will support 440SPe and can be merged before or after my
patches.  If it's before then just dump my ibm_emac patch on the floor.

 - R.

Re: [PATCH 2/4] [PPC32] Add 440SPe support

[Matt Porter]

On Thu, Sep 22, 2005 at 08:03:35PM -0700, Roland Dreier wrote:
> Add support for the AMCC PowerPC 440SPe SoC.
> 
> Signed-off-by: Roland Dreier <rolandd@cisco.com>
> 
> ---
> 
>  arch/ppc/kernel/cputable.c          |   10 +++
>  arch/ppc/platforms/4xx/Kconfig      |    8 ++
>  arch/ppc/platforms/4xx/Makefile     |    1 
>  arch/ppc/platforms/4xx/amcc440spe.c |  134 +++++++++++++++++++++++++++++++++++
>  arch/ppc/platforms/4xx/amcc440spe.h |   64 +++++++++++++++++

Please change these new files to ppc440spe.*.  After the new EMAC
driver is merged, we are planning a Great Renaming(tm) to make the current
filenames be vendor neutral. i.e. ibm4*->ppc4*

-Matt

Re: [PATCH 2/4] [PPC32] Add 440SPe support

[Roland Dreier]

    Matt> Please change these new files to ppc440spe.*.  After the new
    Matt> EMAC driver is merged, we are planning a Great Renaming(tm)
    Matt> to make the current filenames be vendor neutral. i.e. ibm4*->ppc4*

Okey-doke, will do.

 - R.

Re: [PATCH 2/4] [PPC32] Add 440SPe support

[Roland Dreier]

    Matt> Please change these new files to ppc440spe.*.  After the new
    Matt> EMAC driver is merged, we are planning a Great Renaming(tm)
    Matt> to make the current filenames be vendor neutral. i.e. ibm4*->ppc4*

OK, I made these changes and rebased to Eugene's EMAC git tree.  This
tree passes some basic tests on my Yucca board.  I just pushed this,
so pending mirror delays, it will be at

  rsync://rsync.kernel.org/pub/scm/linux/kernel/git/roland/ppc440spe.git

I can repost the patchset if anyone wants to see it.

BTW, Eugene, you might want to do a 'git prune-packed' on your git
tree.  It's pretty wasteful to clone your tree now, because you have a
lot of individual objects that also appear in Linus's packs.

 - R.

Re: [PATCH 2/4] [PPC32] Add 440SPe support

[Eugene Surovegin]

On Fri, Sep 23, 2005 at 03:44:35PM -0700, Roland Dreier wrote:
> BTW, Eugene, you might want to do a 'git prune-packed' on your git
> tree.  It's pretty wasteful to clone your tree now, because you have a
> lot of individual objects that also appear in Linus's packs.

Yeah, I did this yesterday, so I guess your next pulls should be OK. 
You may need to do this on the cloned tree as well.

-- 
Eugene

[PATCH 3/4] [PPC32] Add 440SPe support

[Roland Dreier]

Add support for the AMCC PowerPC 440SPe SoC, including PCI Express
in root port mode.

Signed-off-by: Roland Dreier <rolandd@cisco.com>

---

 arch/ppc/kernel/cputable.c         |   10 +
 arch/ppc/platforms/4xx/Kconfig     |    8 -
 arch/ppc/platforms/4xx/Makefile    |    1 
 arch/ppc/platforms/4xx/ppc440spe.c |  155 +++++++++++++
 arch/ppc/platforms/4xx/ppc440spe.h |   66 +++++
 arch/ppc/syslib/Makefile           |    1 
 arch/ppc/syslib/ibm440sp_common.c  |    4 
 arch/ppc/syslib/ibm44x_common.c    |    2 
 arch/ppc/syslib/ppc440spe_pcie.c   |  442 ++++++++++++++++++++++++++++++++++++
 arch/ppc/syslib/ppc440spe_pcie.h   |  149 ++++++++++++
 arch/ppc/syslib/ppc4xx_pic.c       |   37 +++
 include/asm-ppc/ibm44x.h           |   55 +++-
 12 files changed, 911 insertions(+), 19 deletions(-)
 create mode 100644 arch/ppc/platforms/4xx/ppc440spe.c
 create mode 100644 arch/ppc/platforms/4xx/ppc440spe.h
 create mode 100644 arch/ppc/syslib/ppc440spe_pcie.c
 create mode 100644 arch/ppc/syslib/ppc440spe_pcie.h

applies-to: 4fd5412aaadbef40224cd63dbdcd102b2eb35309
88f12de483e4b44427ae5652206fccc19186946f
diff --git a/arch/ppc/kernel/cputable.c b/arch/ppc/kernel/cputable.c
index 546e1ea..9c6a188 100644
--- a/arch/ppc/kernel/cputable.c
+++ b/arch/ppc/kernel/cputable.c
@@ -972,6 +972,16 @@ struct cpu_spec	cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 	},
+	{ /* 440SPe Rev. A */
+		.pvr_mask		= 0xff000fff,
+		.pvr_value		= 0x53000890,
+		.cpu_name		= "440SPe Rev. A",
+		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
+			CPU_FTR_USE_TB,
+		.cpu_user_features	= PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+	},
 #endif /* CONFIG_44x */
 #ifdef CONFIG_FSL_BOOKE
 	{ 	/* e200z5 */
diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig
index 76f4476..108d5a7 100644
--- a/arch/ppc/platforms/4xx/Kconfig
+++ b/arch/ppc/platforms/4xx/Kconfig
@@ -124,9 +124,13 @@ config 440SP
 	depends on LUAN
 	default y
 
+config 440SPE
+	bool
+	default n
+
 config 440
 	bool
-	depends on 440GP || 440SP || 440EP
+	depends on 440GP || 440SP || 440SPE || 440EP
 	default y
 
 config 440A
@@ -168,7 +172,7 @@ config XILINX_OCP
 
 config IBM_EMAC4
 	bool
-	depends on 440GX || 440SP
+	depends on 440GX || 440SP || 440SPE
 	default y
 
 config BIOS_FIXUP
diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile
index 1dd6d7f..694accd 100644
--- a/arch/ppc/platforms/4xx/Makefile
+++ b/arch/ppc/platforms/4xx/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_440EP)		+= ibm440ep.o
 obj-$(CONFIG_440GP)		+= ibm440gp.o
 obj-$(CONFIG_440GX)		+= ibm440gx.o
 obj-$(CONFIG_440SP)		+= ibm440sp.o
+obj-$(CONFIG_440SPE)		+= ppc440spe.o
 obj-$(CONFIG_405EP)		+= ibm405ep.o
 obj-$(CONFIG_405GPR)		+= ibm405gpr.o
 obj-$(CONFIG_VIRTEX_II_PRO)	+= virtex-ii_pro.o
diff --git a/arch/ppc/platforms/4xx/ppc440spe.c b/arch/ppc/platforms/4xx/ppc440spe.c
new file mode 100644
index 0000000..aadab0a
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ppc440spe.c
@@ -0,0 +1,155 @@
+/*
+ * arch/ppc/platforms/4xx/ppc440spe.c
+ *
+ * PPC440SPe I/O descriptions
+ *
+ * Roland Dreier <rolandd@cisco.com>
+ * Copyright (c) 2005 Cisco Systems.  All rights reserved.
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2002-2005 MontaVista Software Inc.
+ *
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ * Copyright (c) 2003, 2004 Zultys Technologies
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <platforms/4xx/ppc440spe.h>
+#include <asm/ocp.h>
+#include <asm/ppc4xx_pic.h>
+
+static struct ocp_func_emac_data ppc440spe_emac0_def = {
+	.rgmii_idx	= -1,		/* No RGMII */
+	.rgmii_mux	= -1,		/* No RGMII */
+	.zmii_idx       = -1,           /* No ZMII */
+	.zmii_mux       = -1,           /* No ZMII */
+	.mal_idx        = 0,            /* MAL device index */
+	.mal_rx_chan    = 0,            /* MAL rx channel number */
+	.mal_tx_chan    = 0,            /* MAL tx channel number */
+	.wol_irq        = 61,  		/* WOL interrupt number */
+	.mdio_idx       = -1,           /* No shared MDIO */
+	.tah_idx	= -1,		/* No TAH */
+};
+OCP_SYSFS_EMAC_DATA()
+
+static struct ocp_func_mal_data ppc440spe_mal0_def = {
+	.num_tx_chans   = 1,    	/* Number of TX channels */
+	.num_rx_chans   = 1,    	/* Number of RX channels */
+	.txeob_irq	= 38,		/* TX End Of Buffer IRQ  */
+	.rxeob_irq	= 39,		/* RX End Of Buffer IRQ  */
+	.txde_irq	= 34,		/* TX Descriptor Error IRQ */
+	.rxde_irq	= 35,		/* RX Descriptor Error IRQ */
+	.serr_irq	= 33,		/* MAL System Error IRQ    */
+	.dcr_base	= DCRN_MAL_BASE /* MAL0_CFG DCR number */
+};
+OCP_SYSFS_MAL_DATA()
+
+static struct ocp_func_iic_data ppc440spe_iic0_def = {
+	.fast_mode	= 0,		/* Use standad mode (100Khz) */
+};
+
+static struct ocp_func_iic_data ppc440spe_iic1_def = {
+	.fast_mode	= 0,		/* Use standad mode (100Khz) */
+};
+OCP_SYSFS_IIC_DATA()
+
+struct ocp_def core_ocp[] = {
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_OPB,
+	  .index	= 0,
+	  .paddr	= 0x0000000140000000ULL,
+	  .irq		= OCP_IRQ_NA,
+	  .pm		= OCP_CPM_NA,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_16550,
+	  .index	= 0,
+	  .paddr	= PPC440SPE_UART0_ADDR,
+	  .irq		= UART0_INT,
+	  .pm		= IBM_CPM_UART0,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_16550,
+	  .index	= 1,
+	  .paddr	= PPC440SPE_UART1_ADDR,
+	  .irq		= UART1_INT,
+	  .pm		= IBM_CPM_UART1,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_16550,
+	  .index	= 2,
+	  .paddr	= PPC440SPE_UART2_ADDR,
+	  .irq		= UART2_INT,
+	  .pm		= IBM_CPM_UART2,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_IIC,
+	  .index	= 0,
+	  .paddr	= 0x00000001f0000400ULL,
+	  .irq		= 2,
+	  .pm		= IBM_CPM_IIC0,
+	  .additions	= &ppc440spe_iic0_def,
+	  .show		= &ocp_show_iic_data
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_IIC,
+	  .index	= 1,
+	  .paddr	= 0x00000001f0000500ULL,
+	  .irq		= 3,
+	  .pm		= IBM_CPM_IIC1,
+	  .additions	= &ppc440spe_iic1_def,
+	  .show		= &ocp_show_iic_data
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_GPIO,
+	  .index	= 0,
+	  .paddr	= 0x00000001f0000700ULL,
+	  .irq		= OCP_IRQ_NA,
+	  .pm		= IBM_CPM_GPIO0,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_MAL,
+	  .paddr	= OCP_PADDR_NA,
+	  .irq		= OCP_IRQ_NA,
+	  .pm		= OCP_CPM_NA,
+	  .additions	= &ppc440spe_mal0_def,
+	  .show		= &ocp_show_mal_data,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_EMAC,
+	  .index	= 0,
+	  .paddr	= 0x00000004f0000800ULL,
+	  .irq		= 60,
+	  .pm		= OCP_CPM_NA,
+	  .additions	= &ppc440spe_emac0_def,
+	  .show		= &ocp_show_emac_data,
+	},
+	{ .vendor	= OCP_VENDOR_INVALID
+	}
+};
+
+/* Polarity and triggering settings for internal interrupt sources */
+struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
+	{ .polarity     = 0xffffffff,
+	  .triggering   = 0x010f0004,
+	  .ext_irq_mask = 0x00000000,
+	},
+	{ .polarity     = 0xffffffff,
+	  .triggering   = 0x001f8040,
+	  .ext_irq_mask = 0x00007c30,   /* IRQ6 - IRQ7, IRQ8 - IRQ12 */
+	},
+	{ .polarity     = 0xffffffff,
+	  .triggering   = 0x00000000,
+	  .ext_irq_mask = 0x000000fc,   /* IRQ0 - IRQ5 */
+	},
+	{ .polarity     = 0xffffffff,
+	  .triggering   = 0x00000000,
+	  .ext_irq_mask = 0x00000000,
+	},
+};
diff --git a/arch/ppc/platforms/4xx/ppc440spe.h b/arch/ppc/platforms/4xx/ppc440spe.h
new file mode 100644
index 0000000..2216846
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ppc440spe.h
@@ -0,0 +1,66 @@
+/*
+ * arch/ppc/platforms/4xx/ibm440spe.h
+ *
+ * PPC440SPe definitions
+ *
+ * Roland Dreier <rolandd@cisco.com>
+ * Copyright (c) 2005 Cisco Systems.  All rights reserved.
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2004-2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifdef __KERNEL__
+#ifndef __PPC_PLATFORMS_PPC440SPE_H
+#define __PPC_PLATFORMS_PPC440SPE_H
+
+#include <linux/config.h>
+
+#include <asm/ibm44x.h>
+
+/* UART */
+#define PPC440SPE_UART0_ADDR	0x00000004f0000200ULL
+#define PPC440SPE_UART1_ADDR	0x00000004f0000300ULL
+#define PPC440SPE_UART2_ADDR	0x00000004f0000600ULL
+#define UART0_INT		0
+#define UART1_INT		1
+#define UART2_INT		37
+
+/* Clock and Power Management */
+#define IBM_CPM_IIC0		0x80000000	/* IIC interface */
+#define IBM_CPM_IIC1		0x40000000	/* IIC interface */
+#define IBM_CPM_PCI		0x20000000	/* PCI bridge */
+#define IBM_CPM_CPU		    0x02000000	/* processor core */
+#define IBM_CPM_DMA		    0x01000000	/* DMA controller */
+#define IBM_CPM_BGO		    0x00800000	/* PLB to OPB bus arbiter */
+#define IBM_CPM_BGI		    0x00400000	/* OPB to PLB bridge */
+#define IBM_CPM_EBC		    0x00200000	/* External Bux Controller */
+#define IBM_CPM_EBM		    0x00100000	/* Ext Bus Master Interface */
+#define IBM_CPM_DMC		    0x00080000	/* SDRAM peripheral controller */
+#define IBM_CPM_PLB		    0x00040000	/* PLB bus arbiter */
+#define IBM_CPM_SRAM		0x00020000	/* SRAM memory controller */
+#define IBM_CPM_PPM		    0x00002000	/* PLB Performance Monitor */
+#define IBM_CPM_UIC1		0x00001000	/* Universal Interrupt Controller */
+#define IBM_CPM_GPIO0		0x00000800	/* General Purpose IO (??) */
+#define IBM_CPM_GPT		    0x00000400	/* General Purpose Timers  */
+#define IBM_CPM_UART0		0x00000200	/* serial port 0 */
+#define IBM_CPM_UART1		0x00000100	/* serial port 1 */
+#define IBM_CPM_UART2		0x00000100	/* serial port 1 */
+#define IBM_CPM_UIC0		0x00000080	/* Universal Interrupt Controller */
+#define IBM_CPM_TMRCLK		0x00000040	/* CPU timers */
+#define IBM_CPM_EMAC0  		0x00000020	/* EMAC 0     */
+
+#define DFLT_IBM4xx_PM		~(IBM_CPM_UIC | IBM_CPM_UIC1 | IBM_CPM_CPU \
+				| IBM_CPM_EBC | IBM_CPM_SRAM | IBM_CPM_BGO \
+				| IBM_CPM_EBM | IBM_CPM_PLB | IBM_CPM_OPB \
+				| IBM_CPM_TMRCLK | IBM_CPM_DMA | IBM_CPM_PCI \
+				| IBM_CPM_TAHOE0 | IBM_CPM_TAHOE1 \
+				| IBM_CPM_EMAC0 | IBM_CPM_EMAC1 \
+			  	| IBM_CPM_EMAC2 | IBM_CPM_EMAC3 )
+#endif /* __PPC_PLATFORMS_PPC440SP_H */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
index b8d08f3..a060740 100644
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_440EP)		+= ibm440gx_common.
 obj-$(CONFIG_440GP)		+= ibm440gp_common.o
 obj-$(CONFIG_440GX)		+= ibm440gx_common.o
 obj-$(CONFIG_440SP)		+= ibm440gx_common.o ibm440sp_common.o
+obj-$(CONFIG_440SPE)		+= ibm440gx_common.o ibm440sp_common.o ppc440spe_pcie.o
 ifeq ($(CONFIG_4xx),y)
 ifeq ($(CONFIG_VIRTEX_II_PRO),y)
 obj-$(CONFIG_40x)		+= xilinx_pic.o
diff --git a/arch/ppc/syslib/ibm440sp_common.c b/arch/ppc/syslib/ibm440sp_common.c
index 417d4cf..cdafda1 100644
--- a/arch/ppc/syslib/ibm440sp_common.c
+++ b/arch/ppc/syslib/ibm440sp_common.c
@@ -1,7 +1,7 @@
 /*
  * arch/ppc/syslib/ibm440sp_common.c
  *
- * PPC440SP system library
+ * PPC440SP/PPC440SPe system library
  *
  * Matt Porter <mporter@kernel.crashing.org>
  * Copyright 2002-2005 MontaVista Software Inc.
@@ -35,7 +35,7 @@ unsigned long __init ibm440sp_find_end_o
 	u32 mem_size = 0;
 
 	/* Read two bank sizes and sum */
-	for (i=0; i<2; i++)
+	for (i=0; i< MQ0_NUM_BANKS; i++)
 		switch (mfdcr(DCRN_MQ0_BS0BAS + i) & MQ0_CONFIG_SIZE_MASK) {
 			case MQ0_CONFIG_SIZE_8M:
 				mem_size += PPC44x_MEM_SIZE_8M;
diff --git a/arch/ppc/syslib/ibm44x_common.c b/arch/ppc/syslib/ibm44x_common.c
index 457e67e..18c29fd 100644
--- a/arch/ppc/syslib/ibm44x_common.c
+++ b/arch/ppc/syslib/ibm44x_common.c
@@ -181,7 +181,7 @@ void __init ibm44x_platform_init(void)
 /* Called from MachineCheckException */
 void platform_machine_check(struct pt_regs *regs)
 {
-#ifdef CONFIG_440SP
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
     	printk("PLB0: BEAR=0x%08x%08x ACR=  0x%08x BESR= 0x%08x%08x\n",
 	       mfdcr(DCRN_PLB0_BEARH), mfdcr(DCRN_PLB0_BEARL),
 	       mfdcr(DCRN_PLB0_ACR), mfdcr(DCRN_PLB0_BESRH),
diff --git a/arch/ppc/syslib/ppc440spe_pcie.c b/arch/ppc/syslib/ppc440spe_pcie.c
new file mode 100644
index 0000000..38ba588
--- /dev/null
+++ b/arch/ppc/syslib/ppc440spe_pcie.c
@@ -0,0 +1,442 @@
+/*
+ * Copyright (c) 2005 Cisco Systems.  All rights reserved.
+ * Roland Dreier <rolandd@cisco.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+
+#include <asm/reg.h>
+#include <asm/io.h>
+#include <asm/ibm44x.h>
+
+#include "ppc440spe_pcie.h"
+
+static int
+pcie_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		     int len, u32 *val)
+{
+	struct pci_controller *hose = bus->sysdata;
+
+	if (PCI_SLOT(devfn) != 1)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	offset += devfn << 12;
+
+	/*
+	 * Note: the caller has already checked that offset is
+	 * suitably aligned and that len is 1, 2 or 4.
+	 */
+	switch (len) {
+	case 1:
+		*val = in_8(hose->cfg_data + offset);
+		break;
+	case 2:
+		*val = in_le16(hose->cfg_data + offset);
+		break;
+	default:
+		*val = in_le32(hose->cfg_data + offset);
+		break;
+	}
+
+	if (0) printk("%s: read %x(%d) @ %x\n", __func__, *val, len, offset);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+pcie_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		      int len, u32 val)
+{
+	struct pci_controller *hose = bus->sysdata;
+
+	if (PCI_SLOT(devfn) != 1)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	offset += devfn << 12;
+
+	switch (len) {
+	case 1:
+		out_8(hose->cfg_data + offset, val);
+		break;
+	case 2:
+		out_le16(hose->cfg_data + offset, val);
+		break;
+	default:
+		out_le32(hose->cfg_data + offset, val);
+		break;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops pcie_pci_ops =
+{
+	.read  = pcie_read_config,
+	.write = pcie_write_config
+};
+
+enum {
+	PTYPE_ENDPOINT		= 0x0,
+	PTYPE_LEGACY_ENDPOINT	= 0x1,
+	PTYPE_ROOT_PORT		= 0x4,
+
+	LNKW_X1			= 0x1,
+	LNKW_X4			= 0x4,
+	LNKW_X8			= 0x8
+};
+
+static void check_error(void)
+{
+	u32 valPE0, valPE1, valPE2;
+	
+	/* SDR0_PEGPLLLCT1 reset */
+	if (!(valPE0 = SDR_READ(PESDR0_PLLLCT1) & 0x01000000)) {
+		printk(KERN_INFO "PCIE: SDR0_PEGPLLLCT1 reset error 0x%8x\n", valPE0);
+	}
+
+	valPE0 = SDR_READ(PESDR0_RCSSET);
+	valPE1 = SDR_READ(PESDR1_RCSSET);
+	valPE2 = SDR_READ(PESDR2_RCSSET);
+
+	/* SDR0_PExRCSSET rstgu */
+	if ( !(valPE0 & 0x01000000) ||
+	     !(valPE1 & 0x01000000) ||
+	     !(valPE2 & 0x01000000)) {
+		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET rstgu error\n");
+	}
+
+	/* SDR0_PExRCSSET rstdl */
+	if ( !(valPE0 & 0x00010000) ||
+	     !(valPE1 & 0x00010000) ||
+	     !(valPE2 & 0x00010000)) {
+		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET rstdl error\n");
+	}
+
+	/* SDR0_PExRCSSET rstpyn */
+	if ( (valPE0 & 0x00001000) ||
+	     (valPE1 & 0x00001000) ||
+	     (valPE2 & 0x00001000)) {
+		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET rstpyn error\n");
+	}
+
+	/* SDR0_PExRCSSET hldplb */
+	if ( (valPE0 & 0x10000000) ||
+	     (valPE1 & 0x10000000) ||
+	     (valPE2 & 0x10000000)) {
+		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET hldplb error\n");
+	}
+
+	/* SDR0_PExRCSSET rdy */
+	if ( (valPE0 & 0x00100000) ||
+	     (valPE1 & 0x00100000) ||
+	     (valPE2 & 0x00100000)) {
+		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET rdy error\n");
+	}
+
+	/* SDR0_PExRCSSET shutdown */
+	if ( (valPE0 & 0x00000100) ||
+	     (valPE1 & 0x00000100) ||
+	     (valPE2 & 0x00000100)) {
+		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET shutdown error\n");
+	}
+}
+
+/*
+ * Initialize PCI Express core as described in User Manual section 27.12.1
+ */
+int ppc440spe_init_pcie(void)
+{
+	/* Set PLL clock receiver to LVPECL */
+	SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) | 1 << 28);
+
+	check_error();
+
+	printk(KERN_INFO "PCIE initialization OK\n");
+
+	if (!(SDR_READ(PESDR0_PLLLCT2) & 0x10000))
+		printk(KERN_INFO "PESDR_PLLCT2 resistance calibration failed (0x%08x)\n",
+		       SDR_READ(PESDR0_PLLLCT2));
+
+	/* De-assert reset of PCIe PLL, wait for lock */
+	SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) & ~(1 << 24));
+	udelay(3);
+
+	return 0;
+}
+
+int ppc440spe_init_pcie_rootport(int port)
+{
+	static int core_init;
+	void __iomem *utl_base;
+	u32 val = 0;
+	int i;
+
+	if (!core_init) {
+		++core_init;
+		i = ppc440spe_init_pcie();
+		if (i)
+			return i;
+	}
+
+	/*
+	 * Initialize various parts of the PCI Express core for our port:
+	 *
+	 * - Set as a root port and enable max width
+	 *   (PXIE0 -> X8, PCIE1 and PCIE2 -> X4).
+	 * - Set up UTL configuration.
+	 * - Increase SERDES drive strength to levels suggested by AMCC.
+	 * - De-assert RSTPYN, RSTDL and RSTGU.
+	 */
+	switch (port) {
+	case 0:
+		SDR_WRITE(PESDR0_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X8 << 12);
+
+		SDR_WRITE(PESDR0_UTLSET1, 0x21222222);
+		SDR_WRITE(PESDR0_UTLSET2, 0x11000000);
+
+		SDR_WRITE(PESDR0_HSSL0SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL1SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL2SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL3SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL4SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL5SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000);
+
+		SDR_WRITE(PESDR0_RCSSET,
+			  (SDR_READ(PESDR0_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
+		break;
+
+	case 1:
+		SDR_WRITE(PESDR1_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X4 << 12);
+
+		SDR_WRITE(PESDR1_UTLSET1, 0x21222222);
+		SDR_WRITE(PESDR1_UTLSET2, 0x11000000);
+
+		SDR_WRITE(PESDR1_HSSL0SET1, 0x35000000);
+		SDR_WRITE(PESDR1_HSSL1SET1, 0x35000000);
+		SDR_WRITE(PESDR1_HSSL2SET1, 0x35000000);
+		SDR_WRITE(PESDR1_HSSL3SET1, 0x35000000);
+
+		SDR_WRITE(PESDR1_RCSSET,
+			  (SDR_READ(PESDR1_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
+		break;
+
+	case 2:
+		SDR_WRITE(PESDR2_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X4 << 12);
+
+		SDR_WRITE(PESDR2_UTLSET1, 0x21222222);
+		SDR_WRITE(PESDR2_UTLSET2, 0x11000000);
+
+		SDR_WRITE(PESDR2_HSSL0SET1, 0x35000000);
+		SDR_WRITE(PESDR2_HSSL1SET1, 0x35000000);
+		SDR_WRITE(PESDR2_HSSL2SET1, 0x35000000);
+		SDR_WRITE(PESDR2_HSSL3SET1, 0x35000000);
+
+		SDR_WRITE(PESDR2_RCSSET,
+			  (SDR_READ(PESDR2_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
+		break;
+	}
+
+	mdelay(1000);
+
+	switch (port) {
+	case 0: val = SDR_READ(PESDR0_RCSSTS); break;
+	case 1: val = SDR_READ(PESDR1_RCSSTS); break;
+	case 2: val = SDR_READ(PESDR2_RCSSTS); break;
+	}
+
+	if (!(val & (1 << 20)))
+		printk(KERN_INFO "PCIE%d: PGRST inactive\n", port);
+	else
+		printk(KERN_WARNING "PGRST for PCIE%d failed %08x\n", port, val);
+	
+	switch (port) {
+	case 0: printk(KERN_INFO "PCIE0: LOOP %08x\n", SDR_READ(PESDR0_LOOP)); break;
+	case 1: printk(KERN_INFO "PCIE1: LOOP %08x\n", SDR_READ(PESDR1_LOOP)); break;
+	case 2: printk(KERN_INFO "PCIE2: LOOP %08x\n", SDR_READ(PESDR2_LOOP)); break;
+	}
+
+	/*
+	 * Map UTL registers at 0xc_1000_0n00
+	 */
+	switch (port) {
+	case 0:
+		mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x0000000c);
+		mtdcr(DCRN_PEGPL_REGBAL(PCIE0), 0x10000000);
+		mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001);
+		mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0x68782800);
+		break;
+
+	case 1:
+		mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x0000000c);
+		mtdcr(DCRN_PEGPL_REGBAL(PCIE1), 0x10001000);
+		mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001);
+		mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0x68782800);
+		break;
+
+	case 2:
+		mtdcr(DCRN_PEGPL_REGBAH(PCIE2), 0x0000000c);
+		mtdcr(DCRN_PEGPL_REGBAL(PCIE2), 0x10002000);
+		mtdcr(DCRN_PEGPL_REGMSK(PCIE2), 0x00007001);
+		mtdcr(DCRN_PEGPL_SPECIAL(PCIE2), 0x68782800);
+	}
+
+	utl_base = ioremap64(0xc10000000ull + 0x1000 * port, 0x100);
+
+	/*
+	 * Set buffer allocations and then assert VRB and TXE.
+	 */
+	out_be32(utl_base + PEUTL_OUTTR,   0x08000000);
+	out_be32(utl_base + PEUTL_INTR,    0x02000000);
+	out_be32(utl_base + PEUTL_OPDBSZ,  0x10000000);
+	out_be32(utl_base + PEUTL_PBBSZ,   0x53000000);
+	out_be32(utl_base + PEUTL_IPHBSZ,  0x08000000);
+	out_be32(utl_base + PEUTL_IPDBSZ,  0x10000000);
+	out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000);
+	out_be32(utl_base + PEUTL_PCTL,    0x80800066);
+
+	iounmap(utl_base);
+
+	/*
+	 * We map PCI Express configuration access into the 512MB regions
+	 *     PCIE0: 0xc_4000_0000
+	 *     PCIE1: 0xc_8000_0000
+	 *     PCIE2: 0xc_c000_0000
+	 */
+	switch (port) {
+	case 0:
+		mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), 0x0000000c);
+		mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), 0x40000000);
+		mtdcr(DCRN_PEGPL_CFGMSK(PCIE0), 0xe0000001); /* 512MB region, valid */
+		break;
+
+	case 1:
+		mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), 0x0000000c);
+		mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), 0x80000000);
+		mtdcr(DCRN_PEGPL_CFGMSK(PCIE1), 0xe0000001); /* 512MB region, valid */
+		break;
+
+	case 2:
+		mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), 0x0000000c);
+		mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), 0xc0000000);
+		mtdcr(DCRN_PEGPL_CFGMSK(PCIE2), 0xe0000001); /* 512MB region, valid */
+		break;
+	}
+
+	/*
+	 * Check for VC0 active and assert RDY.
+	 */
+	switch (port) {
+	case 0:
+		if (!(SDR_READ(PESDR0_RCSSTS) & (1 << 16)))
+			printk(KERN_WARNING "PCIE0: VC0 not active\n");
+		SDR_WRITE(PESDR0_RCSSET, SDR_READ(PESDR0_RCSSET) | 1 << 20);
+		break;
+	case 1:
+		if (!(SDR_READ(PESDR1_RCSSTS) & (1 << 16)))
+			printk(KERN_WARNING "PCIE0: VC0 not active\n");
+		SDR_WRITE(PESDR1_RCSSET, SDR_READ(PESDR1_RCSSET) | 1 << 20);
+		break;
+	case 2:
+		if (!(SDR_READ(PESDR2_RCSSTS) & (1 << 16)))
+			printk(KERN_WARNING "PCIE0: VC0 not active\n");
+		SDR_WRITE(PESDR2_RCSSET, SDR_READ(PESDR2_RCSSET) | 1 << 20);
+		break;
+	}
+
+#if 0
+	/* Dump all config regs */
+	for (i = 0x300; i <= 0x320; ++i)
+		printk("[%04x] 0x%08x\n", i, SDR_READ(i));
+	for (i = 0x340; i <= 0x353; ++i)
+		printk("[%04x] 0x%08x\n", i, SDR_READ(i));
+	for (i = 0x370; i <= 0x383; ++i)
+		printk("[%04x] 0x%08x\n", i, SDR_READ(i));
+	for (i = 0x3a0; i <= 0x3a2; ++i)
+		printk("[%04x] 0x%08x\n", i, SDR_READ(i));
+	for (i = 0x3c0; i <= 0x3c3; ++i)
+		printk("[%04x] 0x%08x\n", i, SDR_READ(i));
+#endif
+
+	mdelay(100);
+
+	return 0;
+}
+
+void ppc440spe_setup_pcie(struct pci_controller *hose, int port)
+{
+	void __iomem *mbase;
+
+	/*
+	 * Map 16MB, which is enough for 4 bits of bus #
+	 */
+	hose->cfg_data = ioremap64(0xc40000000ull + port * 0x40000000,
+				   1 << 24);
+	hose->ops = &pcie_pci_ops;
+
+	/*
+	 * Set bus numbers on our root port
+	 */
+	mbase = ioremap64(0xc50000000ull + port * 0x40000000, 4096);
+	out_8(mbase + PCI_PRIMARY_BUS, 0);
+	out_8(mbase + PCI_SECONDARY_BUS, 0);
+
+	/*
+	 * Set up outbound translation to hose->mem_space from PLB
+	 * addresses at an offset of 0xd_0000_0000.  We set the low
+	 * bits of the mask to 11 to turn off splitting into 8
+	 * subregions and to enable the outbound translation.
+	 */
+	out_le32(mbase + PECFG_POM0LAH, 0);
+	out_le32(mbase + PECFG_POM0LAL, hose->mem_space.start);
+
+	switch (port) {
+	case 0:
+		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0),  0x0000000d);
+		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0),  hose->mem_space.start);
+		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
+		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
+		      ~(hose->mem_space.end - hose->mem_space.start) | 3);
+		break;
+	case 1:
+		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1),  0x0000000d);
+		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1),  hose->mem_space.start);
+		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
+		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
+		      ~(hose->mem_space.end - hose->mem_space.start) | 3);
+
+		break;
+	case 2:
+		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2),  0x0000000d);
+		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2),  hose->mem_space.start);
+		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
+		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
+		      ~(hose->mem_space.end - hose->mem_space.start) | 3);
+		break;
+	}
+
+	/* Set up 16GB inbound memory window at 0 */
+	out_le32(mbase + PCI_BASE_ADDRESS_0, 0);
+	out_le32(mbase + PCI_BASE_ADDRESS_1, 0);
+	out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffc);
+	out_le32(mbase + PECFG_BAR0LMPA, 0);
+	out_le32(mbase + PECFG_PIM0LAL, 0);
+	out_le32(mbase + PECFG_PIM0LAH, 0);
+	out_le32(mbase + PECFG_PIMEN, 0x1);
+
+	/* Enable I/O, Mem, and Busmaster cycles */
+	out_le16(mbase + PCI_COMMAND,
+		 in_le16(mbase + PCI_COMMAND) |
+		 PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+
+	iounmap(mbase);
+}
diff --git a/arch/ppc/syslib/ppc440spe_pcie.h b/arch/ppc/syslib/ppc440spe_pcie.h
new file mode 100644
index 0000000..55b765a
--- /dev/null
+++ b/arch/ppc/syslib/ppc440spe_pcie.h
@@ -0,0 +1,149 @@
+/*
+ * Copyright (c) 2005 Cisco Systems.  All rights reserved.
+ * Roland Dreier <rolandd@cisco.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PPC_SYSLIB_PPC440SPE_PCIE_H
+#define __PPC_SYSLIB_PPC440SPE_PCIE_H
+
+#define DCRN_SDR0_CFGADDR	0x00e
+#define DCRN_SDR0_CFGDATA	0x00f
+
+#define DCRN_PCIE0_BASE		0x100
+#define DCRN_PCIE1_BASE		0x120
+#define DCRN_PCIE2_BASE		0x140
+#define PCIE0			DCRN_PCIE0_BASE
+#define PCIE1			DCRN_PCIE1_BASE
+#define PCIE2			DCRN_PCIE2_BASE
+
+#define DCRN_PEGPL_CFGBAH(base)		(base + 0x00)
+#define DCRN_PEGPL_CFGBAL(base)		(base + 0x01)
+#define DCRN_PEGPL_CFGMSK(base)		(base + 0x02)
+#define DCRN_PEGPL_MSGBAH(base)		(base + 0x03)
+#define DCRN_PEGPL_MSGBAL(base)		(base + 0x04)
+#define DCRN_PEGPL_MSGMSK(base)		(base + 0x05)
+#define DCRN_PEGPL_OMR1BAH(base)	(base + 0x06)
+#define DCRN_PEGPL_OMR1BAL(base)	(base + 0x07)
+#define DCRN_PEGPL_OMR1MSKH(base)	(base + 0x08)
+#define DCRN_PEGPL_OMR1MSKL(base)	(base + 0x09)
+#define DCRN_PEGPL_REGBAH(base)		(base + 0x12)
+#define DCRN_PEGPL_REGBAL(base)		(base + 0x13)
+#define DCRN_PEGPL_REGMSK(base)		(base + 0x14)
+#define DCRN_PEGPL_SPECIAL(base)	(base + 0x15)
+
+/*
+ * System DCRs (SDRs)
+ */
+#define PESDR0_PLLLCT1		0x03a0
+#define PESDR0_PLLLCT2		0x03a1
+#define PESDR0_PLLLCT3		0x03a2
+
+#define PESDR0_UTLSET1		0x0300
+#define PESDR0_UTLSET2		0x0301
+#define PESDR0_DLPSET		0x0302
+#define PESDR0_LOOP		0x0303
+#define PESDR0_RCSSET		0x0304
+#define PESDR0_RCSSTS		0x0305
+#define PESDR0_HSSL0SET1	0x0306
+#define PESDR0_HSSL0SET2	0x0307
+#define PESDR0_HSSL0STS		0x0308
+#define PESDR0_HSSL1SET1	0x0309
+#define PESDR0_HSSL1SET2	0x030a
+#define PESDR0_HSSL1STS		0x030b
+#define PESDR0_HSSL2SET1	0x030c
+#define PESDR0_HSSL2SET2	0x030d
+#define PESDR0_HSSL2STS		0x030e
+#define PESDR0_HSSL3SET1	0x030f
+#define PESDR0_HSSL3SET2	0x0310
+#define PESDR0_HSSL3STS		0x0311
+#define PESDR0_HSSL4SET1	0x0312
+#define PESDR0_HSSL4SET2	0x0313
+#define PESDR0_HSSL4STS		0x0314
+#define PESDR0_HSSL5SET1	0x0315
+#define PESDR0_HSSL5SET2	0x0316
+#define PESDR0_HSSL5STS		0x0317
+#define PESDR0_HSSL6SET1	0x0318
+#define PESDR0_HSSL6SET2	0x0319
+#define PESDR0_HSSL6STS		0x031a
+#define PESDR0_HSSL7SET1	0x031b
+#define PESDR0_HSSL7SET2	0x031c
+#define PESDR0_HSSL7STS		0x031d
+#define PESDR0_HSSCTLSET	0x031e
+#define PESDR0_LANE_ABCD	0x031f
+#define PESDR0_LANE_EFGH	0x0320
+
+#define PESDR1_UTLSET1		0x0340
+#define PESDR1_UTLSET2		0x0341
+#define PESDR1_DLPSET		0x0342
+#define PESDR1_LOOP		0x0343
+#define PESDR1_RCSSET		0x0344
+#define PESDR1_RCSSTS		0x0345
+#define PESDR1_HSSL0SET1	0x0346
+#define PESDR1_HSSL0SET2	0x0347
+#define PESDR1_HSSL0STS		0x0348
+#define PESDR1_HSSL1SET1	0x0349
+#define PESDR1_HSSL1SET2	0x034a
+#define PESDR1_HSSL1STS		0x034b
+#define PESDR1_HSSL2SET1	0x034c
+#define PESDR1_HSSL2SET2	0x034d
+#define PESDR1_HSSL2STS		0x034e
+#define PESDR1_HSSL3SET1	0x034f
+#define PESDR1_HSSL3SET2	0x0350
+#define PESDR1_HSSL3STS		0x0351
+#define PESDR1_HSSCTLSET	0x0352
+#define PESDR1_LANE_ABCD	0x0353
+
+#define PESDR2_UTLSET1		0x0370
+#define PESDR2_UTLSET2		0x0371
+#define PESDR2_DLPSET		0x0372
+#define PESDR2_LOOP		0x0373
+#define PESDR2_RCSSET		0x0374
+#define PESDR2_RCSSTS		0x0375
+#define PESDR2_HSSL0SET1	0x0376
+#define PESDR2_HSSL0SET2	0x0377
+#define PESDR2_HSSL0STS		0x0378
+#define PESDR2_HSSL1SET1	0x0379
+#define PESDR2_HSSL1SET2	0x037a
+#define PESDR2_HSSL1STS		0x037b
+#define PESDR2_HSSL2SET1	0x037c
+#define PESDR2_HSSL2SET2	0x037d
+#define PESDR2_HSSL2STS		0x037e
+#define PESDR2_HSSL3SET1	0x037f
+#define PESDR2_HSSL3SET2	0x0380
+#define PESDR2_HSSL3STS		0x0381
+#define PESDR2_HSSCTLSET	0x0382
+#define PESDR2_LANE_ABCD	0x0383
+
+/*
+ * UTL register offsets
+ */
+#define PEUTL_PBBSZ		0x20
+#define PEUTL_OPDBSZ		0x68
+#define PEUTL_IPHBSZ		0x70
+#define PEUTL_IPDBSZ		0x78
+#define PEUTL_OUTTR		0x90
+#define PEUTL_INTR		0x98
+#define PEUTL_PCTL		0xa0
+#define PEUTL_RCIRQEN		0xb8
+
+/*
+ * Config space register offsets
+ */
+#define PECFG_BAR0LMPA		0x210
+#define PECFG_BAR0HMPA		0x214
+#define PECFG_PIMEN		0x33c
+#define PECFG_PIM0LAL		0x340
+#define PECFG_PIM0LAH		0x344
+#define PECFG_POM0LAL		0x380
+#define PECFG_POM0LAH		0x384
+
+int ppc440spe_init_pcie(void);
+int ppc440spe_init_pcie_rootport(int port);
+void ppc440spe_setup_pcie(struct pci_controller *hose, int port);
+
+#endif /* __PPC_SYSLIB_PPC440SPE_PCIE_H */
diff --git a/arch/ppc/syslib/ppc4xx_pic.c b/arch/ppc/syslib/ppc4xx_pic.c
index 4008621..e3b68d0 100644
--- a/arch/ppc/syslib/ppc4xx_pic.c
+++ b/arch/ppc/syslib/ppc4xx_pic.c
@@ -37,6 +37,7 @@ extern unsigned char ppc4xx_uic_ext_irq_
 #define IRQ_MASK_UICx(irq)		(1 << (31 - ((irq) & 0x1f)))
 #define IRQ_MASK_UIC1(irq)		IRQ_MASK_UICx(irq)
 #define IRQ_MASK_UIC2(irq)		IRQ_MASK_UICx(irq)
+#define IRQ_MASK_UIC3(irq)		IRQ_MASK_UICx(irq)
 
 #define UIC_HANDLERS(n)							\
 static void ppc4xx_uic##n##_enable(unsigned int irq)			\
@@ -87,7 +88,38 @@ static void ppc4xx_uic##n##_end(unsigned
 	.end 		= ppc4xx_uic##n##_end,				\
 }									\
 
-#if NR_UICS == 3
+#if NR_UICS == 4
+#define ACK_UIC0_PARENT
+#define ACK_UIC1_PARENT	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC);
+#define ACK_UIC2_PARENT	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC2NC);
+#define ACK_UIC3_PARENT	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC3NC);
+UIC_HANDLERS(0);
+UIC_HANDLERS(1);
+UIC_HANDLERS(2);
+UIC_HANDLERS(3);
+
+static int ppc4xx_pic_get_irq(struct pt_regs *regs)
+{
+	u32 uic0 = mfdcr(DCRN_UIC_MSR(UIC0));
+	if (uic0 & UIC0_UIC1NC)
+		return 64 - ffs(mfdcr(DCRN_UIC_MSR(UIC1)));
+	else if (uic0 & UIC0_UIC2NC)
+		return 96 - ffs(mfdcr(DCRN_UIC_MSR(UIC2)));
+	else if (uic0 & UIC0_UIC3NC)
+		return 128 - ffs(mfdcr(DCRN_UIC_MSR(UIC3)));
+	else
+		return uic0 ? 32 - ffs(uic0) : -1;
+}
+
+static void __init ppc4xx_pic_impl_init(void)
+{
+	/* Enable cascade interrupts in UIC0 */
+	ppc_cached_irq_mask[0] |= UIC0_UIC1NC | UIC0_UIC2NC | UIC0_UIC3NC;
+	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC | UIC0_UIC2NC | UIC0_UIC3NC);
+	mtdcr(DCRN_UIC_ER(UIC0), ppc_cached_irq_mask[0]);
+}
+
+#elif NR_UICS == 3
 #define ACK_UIC0_PARENT	mtdcr(DCRN_UIC_SR(UICB), UICB_UIC0NC);
 #define ACK_UIC1_PARENT	mtdcr(DCRN_UIC_SR(UICB), UICB_UIC1NC);
 #define ACK_UIC2_PARENT	mtdcr(DCRN_UIC_SR(UICB), UICB_UIC2NC);
@@ -169,6 +201,9 @@ static struct ppc4xx_uic_impl {
 	{ .decl = DECLARE_UIC(1), .base = UIC1 },
 #if NR_UICS > 2
 	{ .decl = DECLARE_UIC(2), .base = UIC2 },
+#if NR_UICS > 3
+	{ .decl = DECLARE_UIC(3), .base = UIC3 },
+#endif
 #endif
 #endif
 };
diff --git a/include/asm-ppc/ibm44x.h b/include/asm-ppc/ibm44x.h
index 4ee1e33..b8a5fd9 100644
--- a/include/asm-ppc/ibm44x.h
+++ b/include/asm-ppc/ibm44x.h
@@ -41,6 +41,9 @@
 #if defined(CONFIG_440SP)
 #define UART0_PHYS_ERPN		1
 #define UART0_PHYS_IO_BASE	0xf0000200
+#elif defined(CONFIG_440SPE)
+#define UART0_PHYS_ERPN		4
+#define UART0_PHYS_IO_BASE	0xf0000200
 #elif defined(CONFIG_440EP)
 #define UART0_PHYS_IO_BASE	0xe0000000
 #else
@@ -61,6 +64,11 @@
 #define	PPC44x_PCICFG_PAGE	0x0000000900000000ULL
 #define	PPC44x_PCIIO_PAGE	PPC44x_PCICFG_PAGE
 #define	PPC44x_PCIMEM_PAGE	0x0000000a00000000ULL
+#elif defined(CONFIG_440SPE)
+#define	PPC44x_IO_PAGE		0x0000000400000000ULL
+#define	PPC44x_PCICFG_PAGE	0x0000000c00000000ULL
+#define	PPC44x_PCIIO_PAGE	PPC44x_PCICFG_PAGE
+#define	PPC44x_PCIMEM_PAGE	0x0000000d00000000ULL
 #elif defined(CONFIG_440EP)
 #define PPC44x_IO_PAGE		0x0000000000000000ULL
 #define PPC44x_PCICFG_PAGE	0x0000000000000000ULL
@@ -76,7 +84,7 @@
 /*
  * 36-bit trap ranges
  */
-#if defined(CONFIG_440SP)
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
 #define PPC44x_IO_LO		0xf0000000UL
 #define PPC44x_IO_HI		0xf0000fffUL
 #define PPC44x_PCI0CFG_LO	0x0ec00000UL
@@ -114,7 +122,7 @@
  */
 
 
-/* CPRs (440GX and 440SP) */
+/* CPRs (440GX and 440SP/440SPe) */
 #define DCRN_CPR_CONFIG_ADDR	0xc
 #define DCRN_CPR_CONFIG_DATA	0xd
 
@@ -135,7 +143,7 @@
 	mtdcr(DCRN_CPR_CONFIG_ADDR, offset); \
 	mtdcr(DCRN_CPR_CONFIG_DATA, data);})
 
-/* SDRs (440GX and 440SP) */
+/* SDRs (440GX and 440SP/440SPe) */
 #define DCRN_SDR_CONFIG_ADDR 	0xe
 #define DCRN_SDR_CONFIG_DATA	0xf
 #define DCRN_SDR_PFC0		0x4100
@@ -185,7 +193,7 @@
 	mtdcr(DCRN_SDR_CONFIG_ADDR, offset); \
 	mtdcr(DCRN_SDR_CONFIG_DATA,data);})
 
-/* DMA (excluding 440SP) */
+/* DMA (excluding 440SP/440SPe) */
 #define DCRN_DMA0_BASE		0x100
 #define DCRN_DMA1_BASE		0x108
 #define DCRN_DMA2_BASE		0x110
@@ -205,12 +213,20 @@
 /* UIC */
 #define DCRN_UIC0_BASE	0xc0
 #define DCRN_UIC1_BASE	0xd0
-#define DCRN_UIC2_BASE	0x210
-#define DCRN_UICB_BASE	0x200
 #define UIC0		DCRN_UIC0_BASE
 #define UIC1		DCRN_UIC1_BASE
+
+#ifdef CONFIG_440SPE
+#define DCRN_UIC2_BASE	0xe0
+#define DCRN_UIC3_BASE	0xf0
+#define UIC2		DCRN_UIC2_BASE
+#define UIC3		DCRN_UIC3_BASE
+#else
+#define DCRN_UIC2_BASE	0x210
+#define DCRN_UICB_BASE	0x200
 #define UIC2		DCRN_UIC2_BASE
 #define UICB		DCRN_UICB_BASE
+#endif
 
 #define DCRN_UIC_SR(base)       (base + 0x0)
 #define DCRN_UIC_ER(base)       (base + 0x2)
@@ -223,6 +239,12 @@
 
 #define UIC0_UIC1NC      	0x00000002
 
+#ifdef CONFIG_440SPE
+#define UIC0_UIC1NC      0x00000002
+#define UIC0_UIC2NC      0x00200000
+#define UIC0_UIC3NC      0x00008000
+#endif
+
 #define UICB_UIC0NC		0x40000000
 #define UICB_UIC1NC		0x10000000
 #define UICB_UIC2NC		0x04000000
@@ -302,8 +324,8 @@
 #define MALOBISR_CH0		0x80000000	/* EOB channel 1 bit */
 #define MALOBISR_CH2		0x40000000	/* EOB channel 2 bit */
 
-#if defined(CONFIG_440SP)
-/* 440SP PLB Arbiter DCRs */
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+/* 440SP/440SPe PLB Arbiter DCRs */
 #define DCRN_PLB_REVID	       0x080		/* PLB Revision ID */
 #define DCRN_PLB_CCR	       0x088		/* PLB Crossbar Control */
 
@@ -430,9 +452,13 @@
 #define PPC44x_MEM_SIZE_1G		0x40000000
 #define PPC44x_MEM_SIZE_2G		0x80000000
 
-/* 440SP memory controller DCRs */
+/* 440SP/440SPe memory controller DCRs */
 #define DCRN_MQ0_BS0BAS			0x40
-#define DCRN_MQ0_BS1BAS			0x41
+#if defined(CONFIG_440SP)
+#define MQ0_NUM_BANKS			2
+#elif defined(CONFIG_440SPE)
+#define MQ0_NUM_BANKS			4
+#endif
 
 #define MQ0_CONFIG_SIZE_MASK		0x0000fff0
 #define MQ0_CONFIG_SIZE_8M		0x0000ffc0
@@ -444,8 +470,9 @@
 #define MQ0_CONFIG_SIZE_512M		0x0000f000
 #define MQ0_CONFIG_SIZE_1G		0x0000e000
 #define MQ0_CONFIG_SIZE_2G		0x0000c000
+#define MQ0_CONFIG_SIZE_4G		0x00008000
 
-/* Internal SRAM Controller 440GX/440SP */
+/* Internal SRAM Controller 440GX/440SP/440SPe */
 #define DCRN_SRAM0_BASE		0x000
 
 #define DCRN_SRAM0_SB0CR	(DCRN_SRAM0_BASE + 0x020)
@@ -469,7 +496,7 @@
 #define DCRN_SRAM0_DPC		(DCRN_SRAM0_BASE + 0x02a)
 #define  SRAM_DPC_ENABLE	0x80000000
 
-/* L2 Cache Controller 440GX/440SP */
+/* L2 Cache Controller 440GX/440SP/440SPe */
 #define DCRN_L2C0_CFG		0x030
 #define  L2C_CFG_L2M		0x80000000
 #define  L2C_CFG_ICU		0x40000000
@@ -633,8 +660,10 @@
 #define IIC_CLOCK		50
 
 #undef NR_UICS
-#ifdef CONFIG_440GX
+#if defined(CONFIG_440GX)
 #define NR_UICS 3
+#elif defined(CONFIG_440SPE)
+#define NR_UICS 4
 #else
 #define NR_UICS 2
 #endif
---
0.99.8.GIT

[PATCH 4/4] [PPC32] Add Yucca (440SPe eval board) platform

[Roland Dreier]

Add support for AMCC PowerPC 440SPe "Yucca" eval board platform.

Signed-off-by: Roland Dreier <rolandd@cisco.com>

---

 arch/ppc/boot/simple/Makefile   |    6 +
 arch/ppc/platforms/4xx/Kconfig  |   11 +
 arch/ppc/platforms/4xx/Makefile |    1 
 arch/ppc/platforms/4xx/yucca.c  |  420 +++++++++++++++++++++++++++++++++++++++
 arch/ppc/platforms/4xx/yucca.h  |  111 ++++++++++
 arch/ppc/syslib/Makefile        |    1 
 include/asm-ppc/ibm4xx.h        |    4 
 7 files changed, 552 insertions(+), 2 deletions(-)
 create mode 100644 arch/ppc/platforms/4xx/yucca.c
 create mode 100644 arch/ppc/platforms/4xx/yucca.h

applies-to: b69675164534e119bbe349478dbeab0c9431826c
68e399cc8c52337dced563bcd344316689312f7f
diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile
index b7bd8f6..ff0904e 100644
--- a/arch/ppc/boot/simple/Makefile
+++ b/arch/ppc/boot/simple/Makefile
@@ -79,6 +79,12 @@ zimageinitrd-$(CONFIG_LUAN)		:= zImage.i
   entrypoint-$(CONFIG_LUAN)		:= 0x01000000
      extra.o-$(CONFIG_LUAN)		:= pibs.o
 
+      zimage-$(CONFIG_YUCCA)		:= zImage-TREE
+zimageinitrd-$(CONFIG_YUCCA)		:= zImage.initrd-TREE
+         end-$(CONFIG_YUCCA)		:= yucca
+  entrypoint-$(CONFIG_YUCCA)		:= 0x01000000
+     extra.o-$(CONFIG_YUCCA)		:= pibs.o
+
       zimage-$(CONFIG_OCOTEA)		:= zImage-TREE
 zimageinitrd-$(CONFIG_OCOTEA)		:= zImage.initrd-TREE
          end-$(CONFIG_OCOTEA)		:= ocotea
diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig
index 108d5a7..e70e4c6 100644
--- a/arch/ppc/platforms/4xx/Kconfig
+++ b/arch/ppc/platforms/4xx/Kconfig
@@ -82,6 +82,12 @@ config LUAN
 	help
 	  This option enables support for the IBM PPC440SP evaluation board.
 
+config YUCCA
+	bool "Yucca"
+	select WANT_EARLY_SERIAL
+	help
+	  This option enables support for the AMCC PPC440SPe evaluation board.
+
 config OCOTEA
 	bool "Ocotea"
 	select WANT_EARLY_SERIAL
@@ -126,7 +132,8 @@ config 440SP
 
 config 440SPE
 	bool
-	default n
+	depends on YUCCA
+	default y
 
 config 440
 	bool
@@ -162,7 +169,7 @@ config BOOKE
 
 config IBM_OCP
 	bool
-	depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
+	depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
 	default y
 
 config XILINX_OCP
diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile
index 694accd..c9bb611 100644
--- a/arch/ppc/platforms/4xx/Makefile
+++ b/arch/ppc/platforms/4xx/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_EBONY)		+= ebony.o
 obj-$(CONFIG_EP405)		+= ep405.o
 obj-$(CONFIG_BUBINGA)		+= bubinga.o
 obj-$(CONFIG_LUAN)		+= luan.o
+obj-$(CONFIG_YUCCA)		+= yucca.o
 obj-$(CONFIG_OCOTEA)		+= ocotea.o
 obj-$(CONFIG_REDWOOD_5)		+= redwood5.o
 obj-$(CONFIG_REDWOOD_6)		+= redwood6.o
diff --git a/arch/ppc/platforms/4xx/yucca.c b/arch/ppc/platforms/4xx/yucca.c
new file mode 100644
index 0000000..b382022
--- /dev/null
+++ b/arch/ppc/platforms/4xx/yucca.c
@@ -0,0 +1,420 @@
+/*
+ * arch/ppc/platforms/4xx/yucca.c
+ *
+ * Yucca board specific routines
+ *
+ * Roland Dreier <rolandd@cisco.com> (based on luan.c by Matt Porter)
+ *
+ * Copyright 2004-2005 MontaVista Software Inc.
+ * Copyright (c) 2005 Cisco Systems.  All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/types.h>
+#include <linux/major.h>
+#include <linux/blkdev.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/ide.h>
+#include <linux/initrd.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ocp.h>
+#include <asm/pci-bridge.h>
+#include <asm/time.h>
+#include <asm/todc.h>
+#include <asm/bootinfo.h>
+#include <asm/ppc4xx_pic.h>
+#include <asm/ppcboot.h>
+
+#include <syslib/ibm44x_common.h>
+#include <syslib/ibm440gx_common.h>
+#include <syslib/ibm440sp_common.h>
+#include <syslib/ppc440spe_pcie.h>
+
+bd_t __res;
+
+static struct ibm44x_clocks clocks __initdata;
+
+static void __init
+yucca_calibrate_decr(void)
+{
+	unsigned int freq;
+
+	if (mfspr(SPRN_CCR1) & CCR1_TCS)
+		freq = YUCCA_TMR_CLK;
+	else
+		freq = clocks.cpu;
+
+	ibm44x_calibrate_decr(freq);
+}
+
+static int
+yucca_show_cpuinfo(struct seq_file *m)
+{
+	seq_printf(m, "vendor\t\t: AMCC\n");
+	seq_printf(m, "machine\t\t: PPC440SPe EVB (Yucca)\n");
+
+	return 0;
+}
+
+static enum {
+	HOSE_UNKNOWN,
+	HOSE_PCIX,
+	HOSE_PCIE0,
+	HOSE_PCIE1,
+	HOSE_PCIE2
+} hose_type[4];
+
+static inline int
+yucca_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+	struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
+
+	if (hose_type[hose->index] == HOSE_PCIX) {
+		static char pci_irq_table[][4] =
+		/*
+		 *	PCI IDSEL/INTPIN->INTLINE
+		 *	  A   B   C   D
+		 */
+		{
+			{ 81, -1, -1, -1 },	/* IDSEL 1 - PCIX0 Slot 0 */
+		};
+		const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4;
+		return PCI_IRQ_TABLE_LOOKUP;
+	} else if (hose_type[hose->index] == HOSE_PCIE0) {
+		static char pci_irq_table[][4] =
+		/*
+		 *	PCI IDSEL/INTPIN->INTLINE
+		 *	  A   B   C   D
+		 */
+		{
+			{ 96, 97, 98, 99 },
+		};
+		const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4;
+		return PCI_IRQ_TABLE_LOOKUP;
+	} else if (hose_type[hose->index] == HOSE_PCIE1) {
+		static char pci_irq_table[][4] =
+		/*
+		 *	PCI IDSEL/INTPIN->INTLINE
+		 *	  A   B   C   D
+		 */
+		{
+			{ 100, 101, 102, 103 },
+		};
+		const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4;
+		return PCI_IRQ_TABLE_LOOKUP;
+	} else if (hose_type[hose->index] == HOSE_PCIE2) {
+		static char pci_irq_table[][4] =
+		/*
+		 *	PCI IDSEL/INTPIN->INTLINE
+		 *	  A   B   C   D
+		 */
+		{
+			{ 104, 105, 106, 107 },
+		};
+		const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4;
+		return PCI_IRQ_TABLE_LOOKUP;
+	}
+	return -1;
+}
+
+static void __init yucca_set_emacdata(void)
+{
+	struct ocp_def *def;
+	struct ocp_func_emac_data *emacdata;
+
+	/* Set phy_map, phy_mode, and mac_addr for the EMAC */
+	def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0);
+	emacdata = def->additions;
+	emacdata->phy_map = 0x00000001;	/* Skip 0x00 */
+	emacdata->phy_mode = PHY_MODE_GMII;
+	memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
+}
+
+static int __init yucca_pcie_card_present(int port)
+{
+   void __iomem *pcie_fpga_base;
+   u16 reg;
+
+   pcie_fpga_base = ioremap64(YUCCA_FPGA_REG_BASE, YUCCA_FPGA_REG_SIZE);
+   reg = in_be16(pcie_fpga_base + FPGA_REG1C);
+   iounmap(pcie_fpga_base);
+
+   switch(port) {
+   case 0: return !(reg & FPGA_REG1C_PE0_PRSNT);
+   case 1: return !(reg & FPGA_REG1C_PE1_PRSNT);
+   case 2: return !(reg & FPGA_REG1C_PE2_PRSNT);
+   default: return 0;
+   }
+}
+
+/*
+ * For the given slot, set rootpoint mode, send power to the slot,
+ * turn on the green LED and turn off the yellow LED, enable the clock
+ * and turn off reset.
+ */
+static void __init yucca_setup_pcie_fpga_rootpoint(int port)
+{
+	void __iomem *pcie_reg_fpga_base;
+	u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint;
+
+	pcie_reg_fpga_base = ioremap64(YUCCA_FPGA_REG_BASE, YUCCA_FPGA_REG_SIZE);
+
+	switch(port) {
+	case 0:
+		rootpoint   = FPGA_REG1C_PE0_ROOTPOINT;
+		endpoint    = 0;
+		power 	    = FPGA_REG1A_PE0_PWRON;
+		green_led   = FPGA_REG1A_PE0_GLED;
+		clock 	    = FPGA_REG1A_PE0_REFCLK_ENABLE;
+		yellow_led  = FPGA_REG1A_PE0_YLED;
+		reset_off   = FPGA_REG1C_PE0_PERST;
+		break;
+	case 1:
+		rootpoint   = 0;
+		endpoint    = FPGA_REG1C_PE1_ENDPOINT;
+		power 	    = FPGA_REG1A_PE1_PWRON;
+		green_led   = FPGA_REG1A_PE1_GLED;
+		clock 	    = FPGA_REG1A_PE1_REFCLK_ENABLE;
+		yellow_led  = FPGA_REG1A_PE1_YLED;
+		reset_off   = FPGA_REG1C_PE1_PERST;
+		break;
+	case 2:
+		rootpoint   = 0;
+		endpoint    = FPGA_REG1C_PE2_ENDPOINT;
+		power 	    = FPGA_REG1A_PE2_PWRON;
+		green_led   = FPGA_REG1A_PE2_GLED;
+		clock 	    = FPGA_REG1A_PE2_REFCLK_ENABLE;
+		yellow_led  = FPGA_REG1A_PE2_YLED;
+		reset_off   = FPGA_REG1C_PE2_PERST;
+		break;
+
+	default:
+		return;
+	}
+
+	out_be16(pcie_reg_fpga_base + FPGA_REG1A,
+		 ~(power | clock | green_led) &
+		 (yellow_led | in_be16(pcie_reg_fpga_base + FPGA_REG1A)));
+	out_be16(pcie_reg_fpga_base + FPGA_REG1C,
+		 ~(endpoint | reset_off) &
+		 (rootpoint | in_be16(pcie_reg_fpga_base + FPGA_REG1C)));
+
+	/*
+	 * Leave device in reset for a while after powering on the
+	 * slot to give it a chance to initialize.
+	 */
+	mdelay(250);
+
+	out_be16(pcie_reg_fpga_base + FPGA_REG1C,
+		 reset_off | in_be16(pcie_reg_fpga_base + FPGA_REG1C));
+
+	iounmap(pcie_reg_fpga_base);
+}
+
+static void __init
+yucca_setup_hoses(void)
+{
+	struct pci_controller *hose;
+	char name[20];
+	int i;
+
+	if (0 && ppc440spe_init_pcie()) {
+		printk(KERN_WARNING "PPC440SPe PCI Express initialization failed\n");
+		return;
+	}
+
+	for (i = 0; i <= 2; ++i) {
+		if (!yucca_pcie_card_present(i))
+			continue;
+
+		printk(KERN_INFO "PCIE%d: card present\n", i);
+		yucca_setup_pcie_fpga_rootpoint(i);
+		if (ppc440spe_init_pcie_rootport(i)) {
+			printk(KERN_WARNING "PCIE%d: initialization failed\n", i);
+			continue;
+		}
+
+		hose = pcibios_alloc_controller();
+		if (!hose)
+			return;
+
+		sprintf(name, "PCIE%d host bridge", i);
+		pci_init_resource(&hose->io_resource,
+				  YUCCA_PCIX_LOWER_IO,
+				  YUCCA_PCIX_UPPER_IO,
+				  IORESOURCE_IO,
+				  name);
+
+		hose->mem_space.start = YUCCA_PCIE_LOWER_MEM +
+			i * YUCCA_PCIE_MEM_SIZE;
+		hose->mem_space.end   = hose->mem_space.start +
+			YUCCA_PCIE_MEM_SIZE - 1;
+
+		pci_init_resource(&hose->mem_resources[0],
+				  hose->mem_space.start,
+				  hose->mem_space.end,
+				  IORESOURCE_MEM,
+				  name);
+
+		hose->first_busno = 0;
+		hose->last_busno  = 15;
+		hose_type[hose->index] = HOSE_PCIE0 + i;
+
+		ppc440spe_setup_pcie(hose, i);
+
+		ppc_md.progress("pre pciauto", 0x122);
+
+		hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
+
+		ppc_md.progress("post pciauto", 0x123);
+	}
+
+	ppc_md.pci_swizzle = common_swizzle;
+	ppc_md.pci_map_irq = yucca_map_irq;
+}
+
+TODC_ALLOC();
+
+static void __init
+yucca_early_serial_map(void)
+{
+	struct uart_port port;
+
+	/* Setup ioremapped serial port access */
+	memset(&port, 0, sizeof(port));
+	port.membase = ioremap64(PPC440SPE_UART0_ADDR, 8);
+	port.irq = UART0_INT;
+	port.uartclk = clocks.uart0;
+	port.regshift = 0;
+	port.iotype = SERIAL_IO_MEM;
+	port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+	port.line = 0;
+
+	if (early_serial_setup(&port) != 0) {
+		printk("Early serial init of port 0 failed\n");
+	}
+
+	port.membase = ioremap64(PPC440SPE_UART1_ADDR, 8);
+	port.irq = UART1_INT;
+	port.uartclk = clocks.uart1;
+	port.line = 1;
+
+	if (early_serial_setup(&port) != 0) {
+		printk("Early serial init of port 1 failed\n");
+	}
+
+	port.membase = ioremap64(PPC440SPE_UART2_ADDR, 8);
+	port.irq = UART2_INT;
+	port.uartclk = BASE_BAUD;
+	port.line = 2;
+
+	if (early_serial_setup(&port) != 0) {
+		printk("Early serial init of port 2 failed\n");
+	}
+}
+
+static void __init
+yucca_setup_arch(void)
+{
+	yucca_set_emacdata();
+
+#if !defined(CONFIG_BDI_SWITCH)
+	/*
+	 * The Abatron BDI JTAG debugger does not tolerate others
+	 * mucking with the debug registers.
+	 */
+        mtspr(SPRN_DBCR0, (DBCR0_TDE | DBCR0_IDM));
+#endif
+
+	/*
+	 * Determine various clocks.
+	 * To be completely correct we should get SysClk
+	 * from FPGA, because it can be changed by on-board switches
+	 * --ebs
+	 */
+	/* 440GX and 440SP clocking is the same -mdp */
+	ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200);
+	ocp_sys_info.opb_bus_freq = clocks.opb;
+
+	/* init to some ~sane value until calibrate_delay() runs */
+        loops_per_jiffy = 50000000/HZ;
+
+	/* Setup PCIXn host bridges */
+	yucca_setup_hoses();
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (initrd_start)
+		ROOT_DEV = Root_RAM0;
+	else
+#endif
+#ifdef CONFIG_ROOT_NFS
+		ROOT_DEV = Root_NFS;
+#else
+		ROOT_DEV = Root_HDA1;
+#endif
+
+	yucca_early_serial_map();
+
+	/* Identify the system */
+	printk("Yucca port (Roland Dreier <rolandd@cisco.com>)\n");
+}
+
+void __init platform_init(unsigned long r3, unsigned long r4,
+		unsigned long r5, unsigned long r6, unsigned long r7)
+{
+	parse_bootinfo(find_bootinfo());
+
+	/*
+	 * If we were passed in a board information, copy it into the
+	 * residual data area.
+	 */
+	if (r3)
+		__res = *(bd_t *)(r3 + KERNELBASE);
+
+#if defined(CONFIG_BLK_DEV_INITRD)
+	/*
+	 * If the init RAM disk has been configured in, and there's a valid
+	 * starting address for it, set it up.
+	 */
+	if (r4) {
+		initrd_start = r4 + KERNELBASE;
+		initrd_end = r5 + KERNELBASE;
+	}
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+	ibm44x_platform_init();
+
+	ppc_md.setup_arch = yucca_setup_arch;
+	ppc_md.show_cpuinfo = yucca_show_cpuinfo;
+	ppc_md.find_end_of_memory = ibm440sp_find_end_of_memory;
+	ppc_md.get_irq = NULL;		/* Set in ppc4xx_pic_init() */
+
+	ppc_md.calibrate_decr = yucca_calibrate_decr;
+#ifdef CONFIG_KGDB
+	ppc_md.early_serial_map = yucca_early_serial_map;
+#endif
+}
diff --git a/arch/ppc/platforms/4xx/yucca.h b/arch/ppc/platforms/4xx/yucca.h
new file mode 100644
index 0000000..de34ba3
--- /dev/null
+++ b/arch/ppc/platforms/4xx/yucca.h
@@ -0,0 +1,111 @@
+/*
+ * arch/ppc/platforms/4xx/yucca.h
+ *
+ * Yucca board definitions
+ *
+ * Roland Dreier <rolandd@cisco.com> (based on luan.h by Matt Porter)
+ *
+ * Copyright 2004-2005 MontaVista Software Inc.
+ * Copyright (c) 2005 Cisco Systems.  All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_YUCCA_H__
+#define __ASM_YUCCA_H__
+
+#include <linux/config.h>
+#include <platforms/4xx/ppc440spe.h>
+
+/* F/W TLB mapping used in bootloader glue to reset EMAC */
+#define PPC44x_EMAC0_MR0	0xa0000800
+
+/* Location of MAC addresses in PIBS image */
+#define PIBS_FLASH_BASE		0xffe00000
+#define PIBS_MAC_BASE		(PIBS_FLASH_BASE+0x1b0400)
+
+/* External timer clock frequency */
+#define YUCCA_TMR_CLK		25000000
+
+/*
+ * FPGA registers
+ */
+#define YUCCA_FPGA_REG_BASE			0x00000004e2000000ULL
+#define YUCCA_FPGA_REG_SIZE			0x24
+
+#define FPGA_REG1A				0x1a
+
+#define FPGA_REG1A_PE0_GLED			0x8000
+#define FPGA_REG1A_PE1_GLED			0x4000
+#define FPGA_REG1A_PE2_GLED			0x2000
+#define FPGA_REG1A_PE0_YLED			0x1000
+#define FPGA_REG1A_PE1_YLED			0x0800
+#define FPGA_REG1A_PE2_YLED			0x0400
+#define FPGA_REG1A_PE0_PWRON			0x0200
+#define FPGA_REG1A_PE1_PWRON			0x0100
+#define FPGA_REG1A_PE2_PWRON			0x0080
+#define FPGA_REG1A_PE0_REFCLK_ENABLE		0x0040
+#define FPGA_REG1A_PE1_REFCLK_ENABLE		0x0020
+#define FPGA_REG1A_PE2_REFCLK_ENABLE		0x0010
+#define FPGA_REG1A_PE_SPREAD0			0x0008
+#define FPGA_REG1A_PE_SPREAD1			0x0004
+#define FPGA_REG1A_PE_SELSOURCE_0		0x0002
+#define FPGA_REG1A_PE_SELSOURCE_1		0x0001
+
+#define FPGA_REG1C				0x1c
+
+#define FPGA_REG1C_PE0_ROOTPOINT		0x8000
+#define FPGA_REG1C_PE1_ENDPOINT			0x4000
+#define FPGA_REG1C_PE2_ENDPOINT			0x2000
+#define FPGA_REG1C_PE0_PRSNT			0x1000
+#define FPGA_REG1C_PE1_PRSNT			0x0800
+#define FPGA_REG1C_PE2_PRSNT			0x0400
+#define FPGA_REG1C_PE0_WAKE			0x0080
+#define FPGA_REG1C_PE1_WAKE			0x0040
+#define FPGA_REG1C_PE2_WAKE			0x0020
+#define FPGA_REG1C_PE0_PERST			0x0010
+#define FPGA_REG1C_PE1_PERST			0x0008
+#define FPGA_REG1C_PE2_PERST			0x0004
+
+/*
+ * Serial port defines
+ */
+#define RS_TABLE_SIZE	3
+
+/* PIBS defined UART mappings, used before early_serial_setup */
+#define UART0_IO_BASE	0xa0000200
+#define UART1_IO_BASE	0xa0000300
+#define UART2_IO_BASE	0xa0000600
+
+#define BASE_BAUD	11059200
+#define STD_UART_OP(num)					\
+	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
+		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
+		iomem_base: UART##num##_IO_BASE,		\
+		io_type: SERIAL_IO_MEM},
+
+#define SERIAL_PORT_DFNS	\
+	STD_UART_OP(0)		\
+	STD_UART_OP(1)		\
+	STD_UART_OP(2)
+
+/* PCI support */
+#define YUCCA_PCIX_LOWER_IO	0x00000000
+#define YUCCA_PCIX_UPPER_IO	0x0000ffff
+#define YUCCA_PCIX_LOWER_MEM	0x80000000
+#define YUCCA_PCIX_UPPER_MEM	0x8fffffff
+#define YUCCA_PCIE_LOWER_MEM	0x90000000
+#define YUCCA_PCIE_MEM_SIZE	0x10000000
+
+#define YUCCA_PCIX_MEM_SIZE	0x10000000
+#define YUCCA_PCIX_MEM_OFFSET	0x00000000
+#define YUCCA_PCIE_MEM_SIZE	0x10000000
+#define YUCCA_PCIE_MEM_OFFSET	0x00000000
+
+#endif				/* __ASM_YUCCA_H__ */
+#endif				/* __KERNEL__ */
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
index a060740..99cc996 100644
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -55,6 +55,7 @@ obj-$(CONFIG_GT64260)		+= gt64260_pic.o
 obj-$(CONFIG_LOPEC)		+= i8259.o pci_auto.o todc_time.o
 obj-$(CONFIG_HDPU)		+= pci_auto.o
 obj-$(CONFIG_LUAN)		+= indirect_pci.o pci_auto.o todc_time.o
+obj-$(CONFIG_YUCCA)		+= indirect_pci.o pci_auto.o todc_time.o
 obj-$(CONFIG_KATANA)		+= pci_auto.o
 obj-$(CONFIG_MV64360)		+= mv64360_pic.o
 obj-$(CONFIG_MV64X60)		+= mv64x60.o mv64x60_win.o indirect_pci.o
diff --git a/include/asm-ppc/ibm4xx.h b/include/asm-ppc/ibm4xx.h
index e992369..6c28ae7 100644
--- a/include/asm-ppc/ibm4xx.h
+++ b/include/asm-ppc/ibm4xx.h
@@ -97,6 +97,10 @@ void ppc4xx_init(unsigned long r3, unsig
 #include <platforms/4xx/luan.h>
 #endif
 
+#if defined(CONFIG_YUCCA)
+#include <platforms/4xx/yucca.h>
+#endif
+
 #if defined(CONFIG_OCOTEA)
 #include <platforms/4xx/ocotea.h>
 #endif
---
0.99.8.GIT