From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from protonic.prtnl (protonic.xs4all.nl [213.84.116.84]) by ozlabs.org (Postfix) with ESMTP id 04EC868458 for ; Wed, 5 Oct 2005 19:16:30 +1000 (EST) Received: from localhost (localhost [127.0.0.1]) by protonic.prtnl (Postfix) with ESMTP id 3578829EC9 for ; Wed, 5 Oct 2005 11:14:53 +0200 (CEST) Received: from protonic.prtnl ([127.0.0.1]) by localhost (protonic [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 20065-07 for ; Wed, 5 Oct 2005 11:14:52 +0200 (CEST) Received: from linux.local (linux.prtnl [192.168.1.97]) by protonic.prtnl (Postfix) with ESMTP id 8718929EC6 for ; Wed, 5 Oct 2005 11:14:52 +0200 (CEST) From: David Jander To: linuxppc-embedded@ozlabs.org Date: Wed, 5 Oct 2005 11:16:20 +0200 References: <200510041711.34388.david.jander@protonic.nl> <43429CBA.6050906@ru.mvista.com> In-Reply-To: <43429CBA.6050906@ru.mvista.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Message-Id: <200510051116.21756.david.jander@protonic.nl> Subject: Re: serial console List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On Tuesday 04 October 2005 17:16, Vitaly Bordug wrote: > Yes, but PQ2FADS use cpm_uart and hence the commandline should be > console=ttyCPM0,115200 You are totally right. I did that same mistake once in the past and again now. Shame on me ;-) Now that I remeber, this might give trouble if you happen to use a normal uart (16550 or similar) also, and devfs. I had to slightly hack serial.c in my version of the kernel for this combination to work. I don't remeber right now exactly what I did, but it had to do with "SERIAL_DEV_OFFSET" and major/minor numbers ;-) Anyway, I don't think your board has this combination. Greetings, -- David Jander