* MPC8xx slave USB driver
@ 2005-10-10 9:13 Alexey Dyatchkov
2005-10-10 11:37 ` Vitaly Bordug
2005-10-10 18:35 ` Wolfgang Denk
0 siblings, 2 replies; 8+ messages in thread
From: Alexey Dyatchkov @ 2005-10-10 9:13 UTC (permalink / raw)
To: linuxppc-embedded
Hi there,
Please help!
I am looking for a slave (client) USB driver for MPC850.
We are using slightly modified Denx linux 2.4.12 on our board (modified
RPXLITE)
Thanks in advance,
Alexey
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: MPC8xx slave USB driver
2005-10-10 9:13 MPC8xx slave USB driver Alexey Dyatchkov
@ 2005-10-10 11:37 ` Vitaly Bordug
2005-10-10 12:02 ` Alexey Dyatchkov
2005-10-10 18:35 ` Wolfgang Denk
1 sibling, 1 reply; 8+ messages in thread
From: Vitaly Bordug @ 2005-10-10 11:37 UTC (permalink / raw)
To: Alexey Dyatchkov; +Cc: linuxppc-embedded
Alexey Dyatchkov wrote:
> Hi there,
>
> Please help!
> I am looking for a slave (client) USB driver for MPC850.
> We are using slightly modified Denx linux 2.4.12 on our board (modified
> RPXLITE)
>
Maybe http://www.heeltoe.com/software/usb/usb.html will help this
case... Well this at least worths to take a look.
> Thanks in advance,
> Alexey
>
>
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>
>
--
Sincerely,
Vitaly
^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: MPC8xx slave USB driver
2005-10-10 11:37 ` Vitaly Bordug
@ 2005-10-10 12:02 ` Alexey Dyatchkov
2005-10-10 12:07 ` Vitaly Bordug
0 siblings, 1 reply; 8+ messages in thread
From: Alexey Dyatchkov @ 2005-10-10 12:02 UTC (permalink / raw)
To: 'Vitaly Bordug'; +Cc: linuxppc-embedded
Thanks!
As far as I understand, it's a host (master) driver...
Alexey
-----Original Message-----
From: Vitaly Bordug [mailto:vbordug@ru.mvista.com]
Sent: Monday, October 10, 2005 1:37 PM
To: Alexey Dyatchkov
Cc: linuxppc-embedded@ozlabs.org
Subject: Re: MPC8xx slave USB driver
Alexey Dyatchkov wrote:
> Hi there,
>
> Please help!
> I am looking for a slave (client) USB driver for MPC850.
> We are using slightly modified Denx linux 2.4.12 on our board (modified
> RPXLITE)
>
Maybe http://www.heeltoe.com/software/usb/usb.html will help this
case... Well this at least worths to take a look.
> Thanks in advance,
> Alexey
>
>
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>
>
--
Sincerely,
Vitaly
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: MPC8xx slave USB driver
2005-10-10 12:02 ` Alexey Dyatchkov
@ 2005-10-10 12:07 ` Vitaly Bordug
2005-10-10 12:19 ` Alexey Dyatchkov
0 siblings, 1 reply; 8+ messages in thread
From: Vitaly Bordug @ 2005-10-10 12:07 UTC (permalink / raw)
To: Alexey Dyatchkov; +Cc: linuxppc-embedded
Alexey Dyatchkov wrote:
> Thanks!
>
> As far as I understand, it's a host (master) driver...
>
Download http://www.heeltoe.com/software/usb/ppc/ppc-usb.tar.gz, there
is usb.c in arch/ppc/8xx_io/
> Alexey
>
> -----Original Message-----
> From: Vitaly Bordug [mailto:vbordug@ru.mvista.com]
> Sent: Monday, October 10, 2005 1:37 PM
> To: Alexey Dyatchkov
> Cc: linuxppc-embedded@ozlabs.org
> Subject: Re: MPC8xx slave USB driver
>
> Alexey Dyatchkov wrote:
>
>>Hi there,
>>
>>Please help!
>>I am looking for a slave (client) USB driver for MPC850.
>>We are using slightly modified Denx linux 2.4.12 on our board (modified
>>RPXLITE)
>>
>
> Maybe http://www.heeltoe.com/software/usb/usb.html will help this
> case... Well this at least worths to take a look.
>
>>Thanks in advance,
>>Alexey
>>
>>
>>_______________________________________________
>>Linuxppc-embedded mailing list
>>Linuxppc-embedded@ozlabs.org
>>https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>>
>>
>
>
>
--
Sincerely,
Vitaly
^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: MPC8xx slave USB driver
2005-10-10 12:07 ` Vitaly Bordug
@ 2005-10-10 12:19 ` Alexey Dyatchkov
0 siblings, 0 replies; 8+ messages in thread
From: Alexey Dyatchkov @ 2005-10-10 12:19 UTC (permalink / raw)
To: 'Vitaly Bordug'; +Cc: linuxppc-embedded
Wow!
Thanks a lot!
Alexey
-----Original Message-----
From: Vitaly Bordug [mailto:vbordug@ru.mvista.com]
Sent: Monday, October 10, 2005 2:08 PM
To: Alexey Dyatchkov
Cc: linuxppc-embedded@ozlabs.org
Subject: Re: MPC8xx slave USB driver
Alexey Dyatchkov wrote:
> Thanks!
>
> As far as I understand, it's a host (master) driver...
>
Download http://www.heeltoe.com/software/usb/ppc/ppc-usb.tar.gz, there
is usb.c in arch/ppc/8xx_io/
> Alexey
>
> -----Original Message-----
> From: Vitaly Bordug [mailto:vbordug@ru.mvista.com]
> Sent: Monday, October 10, 2005 1:37 PM
> To: Alexey Dyatchkov
> Cc: linuxppc-embedded@ozlabs.org
> Subject: Re: MPC8xx slave USB driver
>
> Alexey Dyatchkov wrote:
>
>>Hi there,
>>
>>Please help!
>>I am looking for a slave (client) USB driver for MPC850.
>>We are using slightly modified Denx linux 2.4.12 on our board (modified
>>RPXLITE)
>>
>
> Maybe http://www.heeltoe.com/software/usb/usb.html will help this
> case... Well this at least worths to take a look.
>
>>Thanks in advance,
>>Alexey
>>
>>
>>_______________________________________________
>>Linuxppc-embedded mailing list
>>Linuxppc-embedded@ozlabs.org
>>https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>>
>>
>
>
>
--
Sincerely,
Vitaly
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: MPC8xx slave USB driver
2005-10-10 9:13 MPC8xx slave USB driver Alexey Dyatchkov
2005-10-10 11:37 ` Vitaly Bordug
@ 2005-10-10 18:35 ` Wolfgang Denk
2005-10-11 7:48 ` Alexey Dyatchkov
1 sibling, 1 reply; 8+ messages in thread
From: Wolfgang Denk @ 2005-10-10 18:35 UTC (permalink / raw)
To: Alexey Dyatchkov; +Cc: linuxppc-embedded
In message <003101c5cd7a$e479aa10$0100000a@Omerxp> you wrote:
>
> We are using slightly modified Denx linux 2.4.12 on our board (modified
> RPXLITE)
We never released such a kernel version.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
Often it is fatal to live too long. - Racine
^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: MPC8xx slave USB driver
2005-10-10 18:35 ` Wolfgang Denk
@ 2005-10-11 7:48 ` Alexey Dyatchkov
2005-10-11 9:31 ` Wolfgang Denk
0 siblings, 1 reply; 8+ messages in thread
From: Alexey Dyatchkov @ 2005-10-11 7:48 UTC (permalink / raw)
To: wd; +Cc: linuxppc-embedded
I believe, it was taken from the development tree. Actually, I joined =
this
project already after the linux was tuned for the board, it was about 3 =
or 4
years ago.
Alexey
-----Original Message-----
From: wd@denx.de [mailto:wd@denx.de]=20
Sent: Monday, October 10, 2005 8:35 PM
To: Alexey Dyatchkov
Cc: linuxppc-embedded@ozlabs.org
Subject: Re: MPC8xx slave USB driver=20
In message <003101c5cd7a$e479aa10$0100000a@Omerxp> you wrote:
>=20
> We are using slightly modified Denx linux 2.4.12 on our board =
(modified
> RPXLITE)
We never released such a kernel version.
Best regards,
Wolfgang Denk
--=20
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
Often it is fatal to live too long. - Racine
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: MPC8xx slave USB driver
2005-10-11 7:48 ` Alexey Dyatchkov
@ 2005-10-11 9:31 ` Wolfgang Denk
0 siblings, 0 replies; 8+ messages in thread
From: Wolfgang Denk @ 2005-10-11 9:31 UTC (permalink / raw)
To: Alexey Dyatchkov; +Cc: linuxppc-embedded
In message <002001c5ce38$3a5de690$0100000a@Omerxp> you wrote:
> I believe, it was taken from the development tree. Actually, I joined this
> project already after the linux was tuned for the board, it was about 3 or 4
> years ago.
Please make sure to specify exactly which source tree you are talking
about. There are too many different versions of 2.4 trees for PPC.
> > We are using slightly modified Denx linux 2.4.12 on our board (modified
> > RPXLITE)
>
> We never released such a kernel version.
We (DENX) never released such a tree. We jumped from 2.4.4 to 2.4.18;
and we never removed anything from the development tree - the whole
history is on our CVS server (and now also on git).
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
You don't have to worry about me. I might have been born yesterday...
but I stayed up all night.
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2005-10-11 9:31 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-10-10 9:13 MPC8xx slave USB driver Alexey Dyatchkov
2005-10-10 11:37 ` Vitaly Bordug
2005-10-10 12:02 ` Alexey Dyatchkov
2005-10-10 12:07 ` Vitaly Bordug
2005-10-10 12:19 ` Alexey Dyatchkov
2005-10-10 18:35 ` Wolfgang Denk
2005-10-11 7:48 ` Alexey Dyatchkov
2005-10-11 9:31 ` Wolfgang Denk
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).