* [PATCH] hide pmac specific drivers if CONFIG_ADB is not set @ 2005-10-22 21:30 Olaf Hering 2005-10-22 23:05 ` Benjamin Herrenschmidt 2005-10-23 8:23 ` Geert Uytterhoeven 0 siblings, 2 replies; 7+ messages in thread From: Olaf Hering @ 2005-10-22 21:30 UTC (permalink / raw) To: Benjamin Herrenschmidt, Andrew Morton; +Cc: linuxppc-dev This started out as a fix for https://bugzilla.novell.com/show_bug.cgi?id=119606 Hiding a few pmac specific drivers when ADB is disabled can not hurt: AGP_UNINORTH exist only on systems with ADB_PMU I2C_KEYWEST is used by sound MACE exists only on systems with ADB_CUDA BMAC exists on old and new Macs SCSI_MESH exists on old Macs, but the PB Lombard has an external connector SERIAL_PMACZILOG exists on old and new Macs BLK_DEV_IDE_PMAC exists on old and new Macs APPLE_AIRPORT exist only on systems with ADB_PMU FB_CONTROL exists only on old Macs FB_PLATINUM exists only on old Macs FB_VALKYRIE exists only on old Macs FB_CT65550 exists only on old Macs Signed-off-by: Olaf Hering <olh@suse.de> drivers/char/agp/Kconfig | 2 +- drivers/i2c/busses/Kconfig | 2 +- drivers/ide/Kconfig | 2 +- drivers/net/Kconfig | 4 ++-- drivers/net/wireless/Kconfig | 2 +- drivers/scsi/Kconfig | 4 ++-- drivers/serial/Kconfig | 2 +- drivers/video/Kconfig | 8 ++++---- 8 files changed, 13 insertions(+), 13 deletions(-) Index: linux-2.6.14-rc5/drivers/char/agp/Kconfig =================================================================== --- linux-2.6.14-rc5.orig/drivers/char/agp/Kconfig +++ linux-2.6.14-rc5/drivers/char/agp/Kconfig @@ -147,7 +147,7 @@ config AGP_ALPHA_CORE config AGP_UNINORTH tristate "Apple UniNorth & U3 AGP support" - depends on AGP && PPC_PMAC + depends on AGP && PPC_PMAC && ADB_PMU help This option gives you AGP support for Apple machines with a UniNorth or U3 (Apple G5) bridge. Index: linux-2.6.14-rc5/drivers/i2c/busses/Kconfig =================================================================== --- linux-2.6.14-rc5.orig/drivers/i2c/busses/Kconfig +++ linux-2.6.14-rc5/drivers/i2c/busses/Kconfig @@ -237,7 +237,7 @@ config I2C_IXP2000 config I2C_KEYWEST tristate "Powermac Keywest I2C interface" - depends on I2C && PPC_PMAC + depends on I2C && PPC_PMAC && (ADB_CUDA || ADB_PMU) help This supports the use of the I2C interface in the combo-I/O chip on recent Apple machines. Say Y if you have such a machine. Index: linux-2.6.14-rc5/drivers/net/Kconfig =================================================================== --- linux-2.6.14-rc5.orig/drivers/net/Kconfig +++ linux-2.6.14-rc5/drivers/net/Kconfig @@ -178,7 +178,7 @@ source "drivers/net/arm/Kconfig" config MACE tristate "MACE (Power Mac ethernet) support" - depends on NET_ETHERNET && PPC_PMAC && PPC32 + depends on NET_ETHERNET && PPC_PMAC && PPC32 && ADB_CUDA select CRC32 help Power Macintoshes and clones with Ethernet built-in on the @@ -201,7 +201,7 @@ config MACE_AAUI_PORT config BMAC tristate "BMAC (G3 ethernet) support" - depends on NET_ETHERNET && PPC_PMAC && PPC32 + depends on NET_ETHERNET && PPC_PMAC && PPC32 && (ADB_CUDA || ADB_PMU) select CRC32 help Say Y for support of BMAC Ethernet interfaces. These are used on G3 Index: linux-2.6.14-rc5/drivers/scsi/Kconfig =================================================================== --- linux-2.6.14-rc5.orig/drivers/scsi/Kconfig +++ linux-2.6.14-rc5/drivers/scsi/Kconfig @@ -1529,7 +1529,7 @@ config SCSI_DEBUG config SCSI_MESH tristate "MESH (Power Mac internal SCSI) support" - depends on PPC32 && PPC_PMAC && SCSI + depends on PPC32 && PPC_PMAC && SCSI && (ADB_CUDA || ADB_PMU) help Many Power Macintoshes and clones have a MESH (Macintosh Enhanced SCSI Hardware) SCSI bus adaptor (the 7200 doesn't, but all of the @@ -1560,7 +1560,7 @@ config SCSI_MESH_RESET_DELAY_MS config SCSI_MAC53C94 tristate "53C94 (Power Mac external SCSI) support" - depends on PPC32 && PPC_PMAC && SCSI + depends on PPC32 && PPC_PMAC && SCSI && ADB_CUDA help On Power Macintoshes (and clones) with two SCSI buses, the external SCSI bus is usually controlled by a 53C94 SCSI bus adaptor. Older Index: linux-2.6.14-rc5/drivers/serial/Kconfig =================================================================== --- linux-2.6.14-rc5.orig/drivers/serial/Kconfig +++ linux-2.6.14-rc5/drivers/serial/Kconfig @@ -651,7 +651,7 @@ config SERIAL_68360 config SERIAL_PMACZILOG tristate "PowerMac z85c30 ESCC support" - depends on PPC_OF && PPC_PMAC + depends on PPC_OF && PPC_PMAC && (ADB_CUDA || ADB_PMU) select SERIAL_CORE help This driver supports the Zilog z85C30 serial ports found on Index: linux-2.6.14-rc5/drivers/ide/Kconfig =================================================================== --- linux-2.6.14-rc5.orig/drivers/ide/Kconfig +++ linux-2.6.14-rc5/drivers/ide/Kconfig @@ -744,7 +744,7 @@ endif config BLK_DEV_IDE_PMAC bool "Builtin PowerMac IDE support" - depends on PPC_PMAC && IDE=y + depends on PPC_PMAC && IDE=y && (ADB_CUDA || ADB_PMU) help This driver provides support for the built-in IDE controller on most of the recent Apple Power Macintoshes and PowerBooks. Index: linux-2.6.14-rc5/drivers/net/wireless/Kconfig =================================================================== --- linux-2.6.14-rc5.orig/drivers/net/wireless/Kconfig +++ linux-2.6.14-rc5/drivers/net/wireless/Kconfig @@ -281,7 +281,7 @@ config HERMES config APPLE_AIRPORT tristate "Apple Airport support (built-in)" - depends on PPC_PMAC && HERMES + depends on PPC_PMAC && HERMES && ADB_PMU help Say Y here to support the Airport 802.11b wireless Ethernet hardware built into the Macintosh iBook and other recent PowerPC-based Index: linux-2.6.14-rc5/drivers/video/Kconfig =================================================================== --- linux-2.6.14-rc5.orig/drivers/video/Kconfig +++ linux-2.6.14-rc5/drivers/video/Kconfig @@ -359,7 +359,7 @@ config FB_OF config FB_CONTROL bool "Apple \"control\" display support" - depends on (FB = y) && PPC_PMAC + depends on (FB = y) && PPC_PMAC && ADB_CUDA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -371,7 +371,7 @@ config FB_CONTROL config FB_PLATINUM bool "Apple \"platinum\" display support" - depends on (FB = y) && PPC_PMAC + depends on (FB = y) && PPC_PMAC && ADB_CUDA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -383,7 +383,7 @@ config FB_PLATINUM config FB_VALKYRIE bool "Apple \"valkyrie\" display support" - depends on (FB = y) && (MAC || PPC_PMAC) + depends on (FB = y) && (MAC || (PPC_PMAC && ADB_CUDA)) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -395,7 +395,7 @@ config FB_VALKYRIE config FB_CT65550 bool "Chips 65550 display support" - depends on (FB = y) && PPC + depends on (FB = y) && PPC_PMAC && ADB_CUDA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT -- short story of a lazy sysadmin: alias appserv=wotan ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] hide pmac specific drivers if CONFIG_ADB is not set 2005-10-22 21:30 [PATCH] hide pmac specific drivers if CONFIG_ADB is not set Olaf Hering @ 2005-10-22 23:05 ` Benjamin Herrenschmidt 2005-10-23 8:12 ` Olaf Hering 2005-10-23 8:23 ` Geert Uytterhoeven 1 sibling, 1 reply; 7+ messages in thread From: Benjamin Herrenschmidt @ 2005-10-22 23:05 UTC (permalink / raw) To: Olaf Hering; +Cc: Andrew Morton, linuxppc-dev On Sat, 2005-10-22 at 23:30 +0200, Olaf Hering wrote: > This started out as a fix for https://bugzilla.novell.com/show_bug.cgi?id=119606 > > Hiding a few pmac specific drivers when ADB is disabled can not hurt: > > AGP_UNINORTH exist only on systems with ADB_PMU No. SMU machines too > I2C_KEYWEST is used by sound Same comment. PMU and SMU based machines. Be careful of not breaking ppc64 here :) I think those changes are definitely not welcome now. Wait for the big ppc/ppc64 merge that's coming, a lot of stuff will be consolidated and these will be much easier to do. Also, I'm seriously considering removing the user setting for "CUDA based machiens" vs. "PMU based machines". I may instead just enable machine generations (PowerSurge, PowerStar, Gossamer, Core99, MacRISC2, MacRISC4) > MACE exists only on systems with ADB_CUDA Hrm... No old laptop with Mace ? Yah, I think that's ok. > BMAC exists on old and new Macs Yah, Cuda and PMU based. > SCSI_MESH exists on old Macs, but the PB Lombard has an external connector > SERIAL_PMACZILOG exists on old and new Macs > BLK_DEV_IDE_PMAC exists on old and new Macs You missed SMU again... > APPLE_AIRPORT exist only on systems with ADB_PMU > FB_CONTROL exists only on old Macs > FB_PLATINUM exists only on old Macs > FB_VALKYRIE exists only on old Macs > FB_CT65550 exists only on old Macs No, it's on old laptops which are PMU based Anyway, I'm not fan of this patch at all. We should do that properly in a different way after the merge. Ben. > > Signed-off-by: Olaf Hering <olh@suse.de> > > drivers/char/agp/Kconfig | 2 +- > drivers/i2c/busses/Kconfig | 2 +- > drivers/ide/Kconfig | 2 +- > drivers/net/Kconfig | 4 ++-- > drivers/net/wireless/Kconfig | 2 +- > drivers/scsi/Kconfig | 4 ++-- > drivers/serial/Kconfig | 2 +- > drivers/video/Kconfig | 8 ++++---- > 8 files changed, 13 insertions(+), 13 deletions(-) > > Index: linux-2.6.14-rc5/drivers/char/agp/Kconfig > =================================================================== > --- linux-2.6.14-rc5.orig/drivers/char/agp/Kconfig > +++ linux-2.6.14-rc5/drivers/char/agp/Kconfig > @@ -147,7 +147,7 @@ config AGP_ALPHA_CORE > > config AGP_UNINORTH > tristate "Apple UniNorth & U3 AGP support" > - depends on AGP && PPC_PMAC > + depends on AGP && PPC_PMAC && ADB_PMU > help > This option gives you AGP support for Apple machines with a > UniNorth or U3 (Apple G5) bridge. > Index: linux-2.6.14-rc5/drivers/i2c/busses/Kconfig > =================================================================== > --- linux-2.6.14-rc5.orig/drivers/i2c/busses/Kconfig > +++ linux-2.6.14-rc5/drivers/i2c/busses/Kconfig > @@ -237,7 +237,7 @@ config I2C_IXP2000 > > config I2C_KEYWEST > tristate "Powermac Keywest I2C interface" > - depends on I2C && PPC_PMAC > + depends on I2C && PPC_PMAC && (ADB_CUDA || ADB_PMU) > help > This supports the use of the I2C interface in the combo-I/O > chip on recent Apple machines. Say Y if you have such a machine. > Index: linux-2.6.14-rc5/drivers/net/Kconfig > =================================================================== > --- linux-2.6.14-rc5.orig/drivers/net/Kconfig > +++ linux-2.6.14-rc5/drivers/net/Kconfig > @@ -178,7 +178,7 @@ source "drivers/net/arm/Kconfig" > > config MACE > tristate "MACE (Power Mac ethernet) support" > - depends on NET_ETHERNET && PPC_PMAC && PPC32 > + depends on NET_ETHERNET && PPC_PMAC && PPC32 && ADB_CUDA > select CRC32 > help > Power Macintoshes and clones with Ethernet built-in on the > @@ -201,7 +201,7 @@ config MACE_AAUI_PORT > > config BMAC > tristate "BMAC (G3 ethernet) support" > - depends on NET_ETHERNET && PPC_PMAC && PPC32 > + depends on NET_ETHERNET && PPC_PMAC && PPC32 && (ADB_CUDA || ADB_PMU) > select CRC32 > help > Say Y for support of BMAC Ethernet interfaces. These are used on G3 > Index: linux-2.6.14-rc5/drivers/scsi/Kconfig > =================================================================== > --- linux-2.6.14-rc5.orig/drivers/scsi/Kconfig > +++ linux-2.6.14-rc5/drivers/scsi/Kconfig > @@ -1529,7 +1529,7 @@ config SCSI_DEBUG > > config SCSI_MESH > tristate "MESH (Power Mac internal SCSI) support" > - depends on PPC32 && PPC_PMAC && SCSI > + depends on PPC32 && PPC_PMAC && SCSI && (ADB_CUDA || ADB_PMU) > help > Many Power Macintoshes and clones have a MESH (Macintosh Enhanced > SCSI Hardware) SCSI bus adaptor (the 7200 doesn't, but all of the > @@ -1560,7 +1560,7 @@ config SCSI_MESH_RESET_DELAY_MS > > config SCSI_MAC53C94 > tristate "53C94 (Power Mac external SCSI) support" > - depends on PPC32 && PPC_PMAC && SCSI > + depends on PPC32 && PPC_PMAC && SCSI && ADB_CUDA > help > On Power Macintoshes (and clones) with two SCSI buses, the external > SCSI bus is usually controlled by a 53C94 SCSI bus adaptor. Older > Index: linux-2.6.14-rc5/drivers/serial/Kconfig > =================================================================== > --- linux-2.6.14-rc5.orig/drivers/serial/Kconfig > +++ linux-2.6.14-rc5/drivers/serial/Kconfig > @@ -651,7 +651,7 @@ config SERIAL_68360 > > config SERIAL_PMACZILOG > tristate "PowerMac z85c30 ESCC support" > - depends on PPC_OF && PPC_PMAC > + depends on PPC_OF && PPC_PMAC && (ADB_CUDA || ADB_PMU) > select SERIAL_CORE > help > This driver supports the Zilog z85C30 serial ports found on > Index: linux-2.6.14-rc5/drivers/ide/Kconfig > =================================================================== > --- linux-2.6.14-rc5.orig/drivers/ide/Kconfig > +++ linux-2.6.14-rc5/drivers/ide/Kconfig > @@ -744,7 +744,7 @@ endif > > config BLK_DEV_IDE_PMAC > bool "Builtin PowerMac IDE support" > - depends on PPC_PMAC && IDE=y > + depends on PPC_PMAC && IDE=y && (ADB_CUDA || ADB_PMU) > help > This driver provides support for the built-in IDE controller on > most of the recent Apple Power Macintoshes and PowerBooks. > Index: linux-2.6.14-rc5/drivers/net/wireless/Kconfig > =================================================================== > --- linux-2.6.14-rc5.orig/drivers/net/wireless/Kconfig > +++ linux-2.6.14-rc5/drivers/net/wireless/Kconfig > @@ -281,7 +281,7 @@ config HERMES > > config APPLE_AIRPORT > tristate "Apple Airport support (built-in)" > - depends on PPC_PMAC && HERMES > + depends on PPC_PMAC && HERMES && ADB_PMU > help > Say Y here to support the Airport 802.11b wireless Ethernet hardware > built into the Macintosh iBook and other recent PowerPC-based > Index: linux-2.6.14-rc5/drivers/video/Kconfig > =================================================================== > --- linux-2.6.14-rc5.orig/drivers/video/Kconfig > +++ linux-2.6.14-rc5/drivers/video/Kconfig > @@ -359,7 +359,7 @@ config FB_OF > > config FB_CONTROL > bool "Apple \"control\" display support" > - depends on (FB = y) && PPC_PMAC > + depends on (FB = y) && PPC_PMAC && ADB_CUDA > select FB_CFB_FILLRECT > select FB_CFB_COPYAREA > select FB_CFB_IMAGEBLIT > @@ -371,7 +371,7 @@ config FB_CONTROL > > config FB_PLATINUM > bool "Apple \"platinum\" display support" > - depends on (FB = y) && PPC_PMAC > + depends on (FB = y) && PPC_PMAC && ADB_CUDA > select FB_CFB_FILLRECT > select FB_CFB_COPYAREA > select FB_CFB_IMAGEBLIT > @@ -383,7 +383,7 @@ config FB_PLATINUM > > config FB_VALKYRIE > bool "Apple \"valkyrie\" display support" > - depends on (FB = y) && (MAC || PPC_PMAC) > + depends on (FB = y) && (MAC || (PPC_PMAC && ADB_CUDA)) > select FB_CFB_FILLRECT > select FB_CFB_COPYAREA > select FB_CFB_IMAGEBLIT > @@ -395,7 +395,7 @@ config FB_VALKYRIE > > config FB_CT65550 > bool "Chips 65550 display support" > - depends on (FB = y) && PPC > + depends on (FB = y) && PPC_PMAC && ADB_CUDA > select FB_CFB_FILLRECT > select FB_CFB_COPYAREA > select FB_CFB_IMAGEBLIT ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] hide pmac specific drivers if CONFIG_ADB is not set 2005-10-22 23:05 ` Benjamin Herrenschmidt @ 2005-10-23 8:12 ` Olaf Hering 2005-10-23 8:22 ` Benjamin Herrenschmidt 0 siblings, 1 reply; 7+ messages in thread From: Olaf Hering @ 2005-10-23 8:12 UTC (permalink / raw) To: Benjamin Herrenschmidt; +Cc: Andrew Morton, linuxppc-dev On Sun, Oct 23, Benjamin Herrenschmidt wrote: > On Sat, 2005-10-22 at 23:30 +0200, Olaf Hering wrote: > > This started out as a fix for https://bugzilla.novell.com/show_bug.cgi?id=119606 > > > > Hiding a few pmac specific drivers when ADB is disabled can not hurt: > > > > AGP_UNINORTH exist only on systems with ADB_PMU > > No. SMU machines too arch/ppc64/configs/g5_defconfig has CONFIG_ADB_PMU enabled. It compiles ok with that option disabled. Is there a pmu in early G5 models? -- short story of a lazy sysadmin: alias appserv=wotan ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] hide pmac specific drivers if CONFIG_ADB is not set 2005-10-23 8:12 ` Olaf Hering @ 2005-10-23 8:22 ` Benjamin Herrenschmidt 0 siblings, 0 replies; 7+ messages in thread From: Benjamin Herrenschmidt @ 2005-10-23 8:22 UTC (permalink / raw) To: Olaf Hering; +Cc: Andrew Morton, linuxppc-dev > > No. SMU machines too > > arch/ppc64/configs/g5_defconfig has CONFIG_ADB_PMU enabled. > It compiles ok with that option disabled. > Is there a pmu in early G5 models? Yes, but not newer ones and I intend to change the way all those low level support options are dealt with anyway Ben. ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] hide pmac specific drivers if CONFIG_ADB is not set 2005-10-22 21:30 [PATCH] hide pmac specific drivers if CONFIG_ADB is not set Olaf Hering 2005-10-22 23:05 ` Benjamin Herrenschmidt @ 2005-10-23 8:23 ` Geert Uytterhoeven 2005-10-23 8:23 ` Benjamin Herrenschmidt 1 sibling, 1 reply; 7+ messages in thread From: Geert Uytterhoeven @ 2005-10-23 8:23 UTC (permalink / raw) To: Olaf Hering; +Cc: Andrew Morton, Linux/PPC Development On Sat, 22 Oct 2005, Olaf Hering wrote: > SCSI_MESH exists on old Macs, but the PB Lombard has an external connector And on some CHRP. > --- linux-2.6.14-rc5.orig/drivers/scsi/Kconfig > +++ linux-2.6.14-rc5/drivers/scsi/Kconfig > @@ -1529,7 +1529,7 @@ config SCSI_DEBUG > > config SCSI_MESH > tristate "MESH (Power Mac internal SCSI) support" > - depends on PPC32 && PPC_PMAC && SCSI > + depends on PPC32 && PPC_PMAC && SCSI && (ADB_CUDA || ADB_PMU) > help > Many Power Macintoshes and clones have a MESH (Macintosh Enhanced > SCSI Hardware) SCSI bus adaptor (the 7200 doesn't, but all of the You can no longer enable MESH when compiling for CHRP or when disabling ADB? It's clearly visible my LongTrail died last year... :-( Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] hide pmac specific drivers if CONFIG_ADB is not set 2005-10-23 8:23 ` Geert Uytterhoeven @ 2005-10-23 8:23 ` Benjamin Herrenschmidt 2005-10-23 17:44 ` Brad Boyer 0 siblings, 1 reply; 7+ messages in thread From: Benjamin Herrenschmidt @ 2005-10-23 8:23 UTC (permalink / raw) To: Geert Uytterhoeven; +Cc: Andrew Morton, Linux/PPC Development, Olaf Hering On Sun, 2005-10-23 at 10:23 +0200, Geert Uytterhoeven wrote: > On Sat, 22 Oct 2005, Olaf Hering wrote: > > SCSI_MESH exists on old Macs, but the PB Lombard has an external connector > > And on some CHRP. > > > --- linux-2.6.14-rc5.orig/drivers/scsi/Kconfig > > +++ linux-2.6.14-rc5/drivers/scsi/Kconfig > > @@ -1529,7 +1529,7 @@ config SCSI_DEBUG > > > > config SCSI_MESH > > tristate "MESH (Power Mac internal SCSI) support" > > - depends on PPC32 && PPC_PMAC && SCSI > > + depends on PPC32 && PPC_PMAC && SCSI && (ADB_CUDA || ADB_PMU) > > help > > Many Power Macintoshes and clones have a MESH (Macintosh Enhanced > > SCSI Hardware) SCSI bus adaptor (the 7200 doesn't, but all of the > > You can no longer enable MESH when compiling for CHRP or when disabling ADB? > > It's clearly visible my LongTrail died last year... :-( Come on, Geert, I told you back then I was doing that :) You didn't complain and we figured out nobody around had any of these in working conditions anymore :) Ben. ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] hide pmac specific drivers if CONFIG_ADB is not set 2005-10-23 8:23 ` Benjamin Herrenschmidt @ 2005-10-23 17:44 ` Brad Boyer 0 siblings, 0 replies; 7+ messages in thread From: Brad Boyer @ 2005-10-23 17:44 UTC (permalink / raw) To: Benjamin Herrenschmidt Cc: Andrew Morton, Linux/PPC Development, Geert Uytterhoeven, Olaf Hering On Sun, Oct 23, 2005 at 06:23:31PM +1000, Benjamin Herrenschmidt wrote: > On Sun, 2005-10-23 at 10:23 +0200, Geert Uytterhoeven wrote: > > On Sat, 22 Oct 2005, Olaf Hering wrote: > > > SCSI_MESH exists on old Macs, but the PB Lombard has an external connector > > > > And on some CHRP. > > > > You can no longer enable MESH when compiling for CHRP or when disabling ADB? > > > > It's clearly visible my LongTrail died last year... :-( > > Come on, Geert, I told you back then I was doing that :) You didn't > complain and we figured out nobody around had any of these in working > conditions anymore :) Well, it really doesn't have anything to do with ADB. The problem is actually the macio bus layer, but we don't have CONFIG_ options for that. I've been working on getting the macio code running in 68k, so I was thinking of introducing a CONFIG_MACIO. Would this be an acceptable option? On 68k, I would just default it to yes if the config has CONFIG_MAC, but it could be made a real question for ppc since the platform stuff doesn't really let you select just a pci powermac kernel anymore. Any comments? I suppose if anyone still has one of those old CHRP machines, we could probably get hydra supported by macio_asic to get some of the other drivers working on it. Brad Boyer flar@allandria.com ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2005-10-23 17:44 UTC | newest] Thread overview: 7+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2005-10-22 21:30 [PATCH] hide pmac specific drivers if CONFIG_ADB is not set Olaf Hering 2005-10-22 23:05 ` Benjamin Herrenschmidt 2005-10-23 8:12 ` Olaf Hering 2005-10-23 8:22 ` Benjamin Herrenschmidt 2005-10-23 8:23 ` Geert Uytterhoeven 2005-10-23 8:23 ` Benjamin Herrenschmidt 2005-10-23 17:44 ` Brad Boyer
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).