From: Stephen Rothwell <sfr@canb.auug.org.au>
To: paulus@samba.org
Cc: ppc64-dev <linuxppc64-dev@ozlabs.org>, ppc-dev <linuxppc-dev@ozlabs.org>
Subject: [PATCH 2/2] powerpc: merge scatterlist.h
Date: Tue, 25 Oct 2005 16:59:03 +1000 [thread overview]
Message-ID: <20051025165903.3d4cf14c.sfr@canb.auug.org.au> (raw)
In-Reply-To: <20051025165643.39cac31d.sfr@canb.auug.org.au>
This depends on the 64bit dma_addr_t patch.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
include/asm-powerpc/scatterlist.h | 45 +++++++++++++++++++++++++++++++++++++
include/asm-ppc/scatterlist.h | 25 ---------------------
include/asm-ppc64/scatterlist.h | 31 -------------------------
3 files changed, 45 insertions(+), 56 deletions(-)
create mode 100644 include/asm-powerpc/scatterlist.h
delete mode 100644 include/asm-ppc/scatterlist.h
delete mode 100644 include/asm-ppc64/scatterlist.h
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
d
b7d026746092f2b10eb5c2931aac88cdbec3eb3
diff --git a/include/asm-powerpc/scatterlist.h b/include/asm-powerpc/scatterlist.h
new file mode 100644
--- /dev/null
+++ b/include/asm-powerpc/scatterlist.h
@@ -0,0 +1,45 @@
+#ifndef _ASM_POWERPC_SCATTERLIST_H
+#define _ASM_POWERPC_SCATTERLIST_H
+/*
+ * Copyright (C) 2001 PPC64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#include <asm/dma.h>
+
+struct scatterlist {
+ struct page *page;
+ unsigned int offset;
+ unsigned int length;
+
+ /* For TCE support */
+ dma_addr_t dma_address;
+ u32 dma_length;
+};
+
+/*
+ * These macros should be used after a dma_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns, or alternatively stop on the first sg_dma_len(sg) which
+ * is 0.
+ */
+#define sg_dma_address(sg) ((sg)->dma_address)
+#ifdef __powerpc64__
+#define sg_dma_len(sg) ((sg)->dma_length)
+#else
+#define sg_dma_len(sg) ((sg)->length)
+#endif
+
+#ifdef __powerpc64__
+#define ISA_DMA_THRESHOLD (~0UL)
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_SCATTERLIST_H */
diff --git a/include/asm-ppc/scatterlist.h b/include/asm-ppc/scatterlist.h
deleted file mode 100644
--- a/include/asm-ppc/scatterlist.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifdef __KERNEL__
-#ifndef _PPC_SCATTERLIST_H
-#define _PPC_SCATTERLIST_H
-
-#include <asm/dma.h>
-
-struct scatterlist {
- struct page *page;
- unsigned int offset;
- dma_addr_t dma_address;
- unsigned int length;
-};
-
-/*
- * These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns, or alternatively stop on the first sg_dma_len(sg) which
- * is 0.
- */
-#define sg_dma_address(sg) ((sg)->dma_address)
-#define sg_dma_len(sg) ((sg)->length)
-
-#endif /* !(_PPC_SCATTERLIST_H) */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc64/scatterlist.h b/include/asm-ppc64/scatterlist.h
deleted file mode 100644
--- a/include/asm-ppc64/scatterlist.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef _PPC64_SCATTERLIST_H
-#define _PPC64_SCATTERLIST_H
-
-/*
- * Copyright (C) 2001 PPC64 Team, IBM Corp
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/types.h>
-#include <asm/dma.h>
-
-struct scatterlist {
- struct page *page;
- unsigned int offset;
- unsigned int length;
-
- /* For TCE support */
- dma_addr_t dma_address;
- u32 dma_length;
-};
-
-#define sg_dma_address(sg) ((sg)->dma_address)
-#define sg_dma_len(sg) ((sg)->dma_length)
-
-#define ISA_DMA_THRESHOLD (~0UL)
-
-#endif /* !(_PPC64_SCATTERLIST_H) */
prev parent reply other threads:[~2005-10-25 6:59 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-10-25 6:56 [PATCH 1/2] ppc64: make dma_addr_t 64 bits Stephen Rothwell
2005-10-25 6:59 ` Stephen Rothwell [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20051025165903.3d4cf14c.sfr@canb.auug.org.au \
--to=sfr@canb.auug.org.au \
--cc=linuxppc-dev@ozlabs.org \
--cc=linuxppc64-dev@ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox