From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from hermes.mvista.com (gateway-1237.mvista.com [12.44.186.158]) by ozlabs.org (Postfix) with ESMTP id BB82E68595 for ; Fri, 28 Oct 2005 06:04:41 +1000 (EST) Date: Thu, 27 Oct 2005 13:04:47 -0700 From: "Mark A. Greer" To: Sven Luther Message-ID: <20051027200447.GC13847@mag.az.mvista.com> References: <20051027181751.GD9628@mag.az.mvista.com> <20051027184921.GA11742@localhost.localdomain> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <20051027184921.GA11742@localhost.localdomain> Cc: linuxppc-embedded@ozlabs.org Subject: Re: Board based on MPC7447 and MV64462 List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On Thu, Oct 27, 2005 at 08:49:21PM +0200, Sven Luther wrote: > On Thu, Oct 27, 2005 at 11:17:51AM -0700, Mark A. Greer wrote: > > On Thu, Oct 27, 2005 at 06:47:29PM +0530, Ashish Bijlani wrote: > > > Hi, > > > > > > I've added platform support for a board based on MPC7447A and MV64462 > > > Marvell Discovery III system controller. I modified code for Katana to make > > > it work for this board. The ethernet and serial are working fine but I don't > > > see anything in "lspci" output. > > > > Do you have any pci devices? If not, then that's to be expected. > > If you do, then you have something messed up in your code and they > > aren't being found. > > They should at least shgow the northbridge pci ids, no ? No b/c the regs for the bridge are not pci compliant so the bridge is "excluded" or hidden from the generic pci code (which is where lspci gets its info from). If it wasn't, the generic pci code would get confused as would the bridge. Mark