From: Olof Johansson <olof@lixom.net>
To: linuxppc-dev@ozlabs.org
Subject: [PATCH] PPC: Basic enablement for new 15" PowerBook
Date: Sat, 29 Oct 2005 23:42:56 -0500 [thread overview]
Message-ID: <20051030044256.GA10863@pb15.lixom.net> (raw)
Hi,
Partial enablement patch for the new PowerBooks (hires revisions).
This enables the ATA controller, Gigabit ethernet and basic AGP setup.
Still remaining is to get the touchpad to work, the simple change of
just adding the new USB ids isn't enough. Sleep isn't working quite yet
either but this will give a kernel that can be used for installation
and basic use for now.
It's a qualified guess that the new 17" is PowerBook5,9, but until it's
confirmed there's not much use in adding it to the pmac_feature table.
Signed-off-by: Olof Johansson <olof@lixom.net>
Index: linux-2.6.14/arch/ppc/platforms/pmac_feature.c
===================================================================
--- linux-2.6.14.orig/arch/ppc/platforms/pmac_feature.c 2005-10-29 23:07:09.000000000 -0500
+++ linux-2.6.14/arch/ppc/platforms/pmac_feature.c 2005-10-29 23:26:33.000000000 -0500
@@ -2317,6 +2317,10 @@ static struct pmac_mb_def pmac_mb_defs[]
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
},
+ { "PowerBook5,8", "PowerBook G4 15\"",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+ },
{ "PowerBook6,1", "PowerBook G4 12\"",
PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
Index: linux-2.6.14/drivers/ide/ppc/pmac.c
===================================================================
--- linux-2.6.14.orig/drivers/ide/ppc/pmac.c 2005-10-29 23:07:09.000000000 -0500
+++ linux-2.6.14/drivers/ide/ppc/pmac.c 2005-10-29 23:13:44.000000000 -0500
@@ -1664,11 +1664,16 @@ static struct macio_driver pmac_ide_maci
};
static struct pci_device_id pmac_ide_pci_match[] = {
- { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_UNI_N_ATA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_IPID_ATA100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_K2_ATA100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_UNI_N_ATA,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_IPID_ATA100,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_K2_ATA100,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_SH_ATA,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_IPID2_ATA,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
};
static struct pci_driver pmac_ide_pci_driver = {
Index: linux-2.6.14/drivers/net/sungem.c
===================================================================
--- linux-2.6.14.orig/drivers/net/sungem.c 2005-10-29 23:07:09.000000000 -0500
+++ linux-2.6.14/drivers/net/sungem.c 2005-10-29 23:12:58.000000000 -0500
@@ -128,6 +128,8 @@ static struct pci_device_id gem_pci_tbl[
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_SH_SUNGEM,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
+ { PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_IPID2_GMAC,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
{0, }
};
Index: linux-2.6.14/include/linux/pci_ids.h
===================================================================
--- linux-2.6.14.orig/include/linux/pci_ids.h 2005-10-29 23:07:09.000000000 -0500
+++ linux-2.6.14/include/linux/pci_ids.h 2005-10-29 23:12:58.000000000 -0500
@@ -913,6 +915,10 @@
#define PCI_DEVICE_ID_APPLE_SH_FW 0x0052
#define PCI_DEVICE_ID_APPLE_U3L_AGP 0x0058
#define PCI_DEVICE_ID_APPLE_U3H_AGP 0x0059
+#define PCI_DEVICE_ID_APPLE_IPID2_AGP 0x0066
+#define PCI_DEVICE_ID_APPLE_IPID2_ATA 0x0069
+#define PCI_DEVICE_ID_APPLE_IPID2_FW 0x006a
+#define PCI_DEVICE_ID_APPLE_IPID2_GMAC 0x006b
#define PCI_DEVICE_ID_APPLE_TIGON3 0x1645
#define PCI_VENDOR_ID_YAMAHA 0x1073
Index: linux-2.6.14/drivers/char/agp/uninorth-agp.c
===================================================================
--- linux-2.6.14.orig/drivers/char/agp/uninorth-agp.c 2005-10-29 23:07:09.000000000 -0500
+++ linux-2.6.14/drivers/char/agp/uninorth-agp.c 2005-10-29 23:12:58.000000000 -0500
@@ -557,6 +557,10 @@ static struct agp_device_ids uninorth_ag
.device_id = PCI_DEVICE_ID_APPLE_U3H_AGP,
.chipset_name = "U3H",
},
+ {
+ .device_id = PCI_DEVICE_ID_APPLE_IPID2_AGP,
+ .chipset_name = "UniNorth/Intrepid2",
+ },
};
static int __devinit agp_uninorth_probe(struct pci_dev *pdev,
next reply other threads:[~2005-10-30 5:00 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-10-30 4:42 Olof Johansson [this message]
2005-10-31 16:47 ` [PATCH] PPC: Basic enablement for new 15" PowerBook Segher Boessenkool
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20051030044256.GA10863@pb15.lixom.net \
--to=olof@lixom.net \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).