Re: Linuv 2.6.15-rc1

linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed

* Re: Linuv 2.6.15-rc1
       [not found] <Pine.LNX.4.64.0511111753080.3263@g5.osdl.org>
@ 2005-11-12 20:45 ` Michael Buesch
  2005-11-12 21:00   ` Linus Torvalds
  2005-11-12 21:28   ` PowerBook G4 boot failure " Alexey Dobriyan
  0 siblings, 2 replies; 25+ messages in thread
From: Michael Buesch @ 2005-11-12 20:45 UTC (permalink / raw)
  To: Linus Torvalds; +Cc: linuxppc-dev, Linux Kernel Mailing List


[-- Attachment #1.1: Type: text/plain, Size: 921 bytes --]

On Saturday 12 November 2005 03:24, you wrote:
> 
> Ok,
>  there it is, go wild. Get the git trees, the tar-balls and the patches 
> (some or all of tghe above may still be mirroring out but should show up 
> shortly).

cheers

> The ppc32 and ppc64 trees have largely been merged (to a new generic 
> "powerpc" architecture that can be compiled either 32-bit or 64-bit), and 
> that moved a number of files around. Similarly, the core block-layer got 
> moved to its own subdirectory.

Latest GIT tree does not boot on my G4 PowerBook.
It freezes after displaying:

Welcome to Linux, kernel 2.6.15-rc1-g44e6f84e

linked at		: 0xc0000000
frame buffer at	: 0xb8008000  (phys), 0xd000800  (log)
klimit		: 0xc03f5ae4
MSR		: 0x00003030
HID0		: 0x8410c0bc


.config is attached.
This is a 15 inch post feb2005 PowerBook G4.

2.6.14 properly boots with the same config.

-- 
Greetings Michael.

[-- Attachment #1.2: config --]
[-- Type: text/plain, Size: 39787 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.15-rc1
# Sat Nov 12 21:08:36 2005
#
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_PPC=y
CONFIG_PPC32=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y

#
# Block layer
#
# CONFIG_LBD is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"

#
# Processor
#
CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_POWER3 is not set
# CONFIG_POWER4 is not set
# CONFIG_8xx is not set
# CONFIG_E200 is not set
# CONFIG_E500 is not set
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_TAU=y
# CONFIG_TAU_INT is not set
# CONFIG_TAU_AVERAGE is not set
# CONFIG_KEXEC is not set
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_PMAC=y
# CONFIG_PPC601_SYNC_FIX is not set
# CONFIG_WANT_EARLY_SERIAL is not set
CONFIG_PPC_STD_MMU=y

#
# Platform options
#
CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_APUS is not set
# CONFIG_KATANA is not set
# CONFIG_WILLOW is not set
# CONFIG_CPCI690 is not set
# CONFIG_POWERPMC250 is not set
# CONFIG_CHESTNUT is not set
# CONFIG_SPRUCE is not set
# CONFIG_HDPU is not set
# CONFIG_EV64260 is not set
# CONFIG_LOPEC is not set
# CONFIG_MVME5100 is not set
# CONFIG_PPLUS is not set
# CONFIG_PRPMC750 is not set
# CONFIG_PRPMC800 is not set
# CONFIG_SANDPOINT is not set
# CONFIG_RADSTONE_PPC7D is not set
# CONFIG_PAL4 is not set
# CONFIG_GEMINI is not set
# CONFIG_EST8260 is not set
# CONFIG_SBC82xx is not set
# CONFIG_SBS8260 is not set
# CONFIG_RPX8260 is not set
# CONFIG_TQM8260 is not set
# CONFIG_ADS8272 is not set
# CONFIG_PQ2FADS is not set
# CONFIG_LITE5200 is not set
# CONFIG_MPC834x_SYS is not set
# CONFIG_EV64360 is not set
CONFIG_PPC_CHRP=y
CONFIG_PPC_PMAC=y
CONFIG_PPC_PREP=y
CONFIG_PPC_OF=y
CONFIG_PPCBUG_NVRAM=y
# CONFIG_SMP is not set
# CONFIG_HIGHMEM is not set
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_PROC_DEVICETREE=y
CONFIG_PREP_RESIDUAL=y
CONFIG_PROC_PREPRESIDUAL=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=tty0 root=/dev/hda4"
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SOFTWARE_SUSPEND is not set
# CONFIG_SECCOMP is not set
CONFIG_ISA_DMA_API=y

#
# Bus options
#
# CONFIG_ISA is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_I8259=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_LEGACY_PROC is not set
# CONFIG_PCI_DEBUG is not set

#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=m

#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set

#
# Default settings for advanced configuration options are used
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_BOOT_LOAD=0x00800000

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=m
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=m
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_ARPD=y
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y

#
# IP: Virtual Server Configuration
#
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
# CONFIG_IP_NF_NETBIOS_NS is not set
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
# CONFIG_IP_NF_MATCH_IPRANGE is not set
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
# CONFIG_IP_NF_MATCH_AH_ESP is not set
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
# CONFIG_IP_NF_MATCH_PHYSDEV is not set
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
CONFIG_IP_NF_MATCH_SCTP=m
# CONFIG_IP_NF_MATCH_DCCP is not set
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_CONNMARK=m
# CONFIG_IP_NF_MATCH_CONNBYTES is not set
CONFIG_IP_NF_MATCH_HASHLIMIT=m
# CONFIG_IP_NF_MATCH_STRING is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
# CONFIG_IP_NF_TARGET_ULOG is not set
CONFIG_IP_NF_TARGET_TCPMSS=m
# CONFIG_IP_NF_TARGET_NFQUEUE is not set
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
# CONFIG_IP_NF_TARGET_NETMAP is not set
# CONFIG_IP_NF_TARGET_SAME is not set
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
# CONFIG_IP_NF_TARGET_CLASSIFY is not set
# CONFIG_IP_NF_TARGET_TTL is not set
CONFIG_IP_NF_TARGET_CONNMARK=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# DECnet: Netfilter Configuration
#
# CONFIG_DECNET_NF_GRABULATOR is not set

#
# Bridge: Netfilter Configuration
#
# CONFIG_BRIDGE_NF_EBTABLES is not set

#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_DECNET=m
CONFIG_DECNET_ROUTER=y
CONFIG_DECNET_ROUTE_FWMARK=y
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_IPX=m
CONFIG_IPX_INTERN=y
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=y
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_NET_DIVERT=y
CONFIG_ECONET=m
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=m

#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m

#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_CLS_U32_MARK is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
# CONFIG_NET_CLS_POLICE is not set
# CONFIG_NET_CLS_IND is not set
# CONFIG_NET_ESTIMATOR is not set

#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIBCM203X=m
# CONFIG_BT_HCIBPA10X is not set
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_IEEE80211=m
CONFIG_IEEE80211_DEBUG=y
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set

#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play support
#

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_MAC_FLOPPY is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_SL82C105 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_IDE_PMAC=y
CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
CONFIG_BLK_DEV_IDEDMA_PMAC=y
# CONFIG_BLK_DEV_IDE_PMAC_BLINK is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_MESH is not set
# CONFIG_SCSI_MAC53C94 is not set

#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_IEEE1394_OUI_DB=y
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
# CONFIG_IEEE1394_EXPORT_FULL_API is not set

#
# Device Drivers
#
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_OHCI1394=m

#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
CONFIG_IEEE1394_SBP2_PHYS_DMA=y
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_CMP=m
CONFIG_IEEE1394_AMDTP=m

#
# I2O device support
#
CONFIG_I2O=m
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
# CONFIG_I2O_BUS is not set
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m

#
# Macintosh device drivers
#
CONFIG_ADB=y
CONFIG_ADB_CUDA=y
CONFIG_ADB_PMU=y
CONFIG_PMAC_APM_EMU=y
# CONFIG_PMAC_MEDIABAY is not set
CONFIG_PMAC_BACKLIGHT=y
CONFIG_ADB_MACIO=y
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_THERM_WINDTUNNEL=m
CONFIG_THERM_ADT746X=m
# CONFIG_WINDFARM is not set
CONFIG_ANSLCD=m

#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# PHY device support
#
# CONFIG_PHYLIB is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_MACE is not set
# CONFIG_BMAC is not set
# CONFIG_HAPPYMEAL is not set
CONFIG_SUNGEM=y
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set

#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
# CONFIG_ULI526X is not set
CONFIG_PCMCIA_XIRCOM=m
# CONFIG_PCMCIA_XIRTULIP is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_MV643XX_ETH is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y

#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_PCMCIA_WAVELAN is not set
# CONFIG_PCMCIA_NETWAVE is not set

#
# Wireless 802.11 Frequency Hopping cards support
#
# CONFIG_PCMCIA_RAYCS is not set

#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set

#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set

#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
# CONFIG_HOSTAP is not set
CONFIG_NET_WIRELESS=y

#
# PCMCIA network device support
#
# CONFIG_NET_PCMCIA is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# ATM drivers
#
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E_MAYBE is not set
# CONFIG_ATM_HE is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_SLIP=m
# CONFIG_SLIP_COMPRESSED is not set
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_RX=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_PMACZILOG is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set

#
# IPMI
#
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_NVRAM=y
CONFIG_GEN_RTC=y
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=m
CONFIG_AGP_UNINORTH=m
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_RAW_DRIVER is not set

#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_HYDRA=m
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_ISA=m
CONFIG_I2C_KEYWEST=y
# CONFIG_I2C_MPC is not set
# CONFIG_I2C_NFORCE2 is not set
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
CONFIG_SCx200_ACB=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_STUB=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
CONFIG_I2C_PCA_ISA=m

#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
# CONFIG_SENSORS_PCA9539 is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_RTC8564=m
# CONFIG_SENSORS_M41T00 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Hardware Monitoring support
#
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1031=m
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_FSCHER=m
# CONFIG_SENSORS_FSCPOS is not set
CONFIG_SENSORS_GL518SM=m
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
# CONFIG_SENSORS_LM92 is not set
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_PC87360=m
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_SMSC47M1=m
# CONFIG_SENSORS_SMSC47B397 is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_W83781D=m
# CONFIG_SENSORS_W83792D is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Misc devices
#

#
# Multimedia Capabilities Port drivers
#

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m

#
# Video For Linux
#

#
# Video Adapters
#
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_OVCAMCHIP is not set

#
# Radio Adapters
#
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_MACMODES=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_OF=y
CONFIG_FB_CONTROL=y
CONFIG_FB_PLATINUM=y
CONFIG_FB_VALKYRIE=y
CONFIG_FB_CT65550=y
# CONFIG_FB_ASILIANT is not set
CONFIG_FB_IMSTT=y
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#
# Logo configuration
#
# CONFIG_LOGO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_DEVICE=y

#
# Sound
#
CONFIG_SOUND=y
CONFIG_DMASOUND_PMAC=y
CONFIG_DMASOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_GENERIC_DRIVER=y

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS4281=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
# CONFIG_SND_CA0106 is not set
CONFIG_SND_KORG1212=m
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_HDSP=m
# CONFIG_SND_HDSPM is not set
CONFIG_SND_TRIDENT=m
CONFIG_SND_YMFPCI=m
# CONFIG_SND_AD1889 is not set
CONFIG_SND_ALS4000=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
CONFIG_SND_SONICVIBES=m
CONFIG_SND_VIA82XX=m
# CONFIG_SND_VIA82XX_MODEM is not set
CONFIG_SND_VX222=m
# CONFIG_SND_HDA_INTEL is not set

#
# ALSA PowerMac devices
#
CONFIG_SND_POWERMAC=m
CONFIG_SND_POWERMAC_AUTO_DRC=y

#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m

#
# PCMCIA devices
#

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_SL811_HCD=m
# CONFIG_USB_SL811_CS is not set

#
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_STORAGE_ONETOUCH is not set

#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
# CONFIG_USB_ACECAD is not set
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
CONFIG_USB_MTOUCH=m
# CONFIG_USB_ITMTOUCH is not set
CONFIG_USB_EGALAX=m
# CONFIG_USB_YEALINK is not set
CONFIG_USB_XPAD=m
CONFIG_USB_ATI_REMOTE=m
# CONFIG_USB_KEYSPAN_REMOTE is not set
CONFIG_USB_APPLETOUCH=m

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
CONFIG_USB_VICAM=m
CONFIG_USB_DSBR=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
CONFIG_USB_PWC=m

#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_GL620A is not set
CONFIG_USB_NET_NET1080=m
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
CONFIG_USB_NET_ZAURUS=m
# CONFIG_USB_ZD1201 is not set
CONFIG_USB_MON=y

#
# USB port drivers
#

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRPRIME is not set
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
# CONFIG_USB_SERIAL_CP2101 is not set
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_GARMIN is not set
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_NOKIA_DKU2 is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
# CONFIG_USB_SERIAL_OPTION is not set
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETSERVO=m
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
CONFIG_USB_TEST=m

#
# USB DSL modem support
#
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
# CONFIG_USB_CXACRU is not set
# CONFIG_USB_XUSBATM is not set

#
# USB Gadget Support
#
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_SELECTED=y
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=m
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_FILE_STORAGE_TEST=y
CONFIG_USB_G_SERIAL=m

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# SN Devices
#

#
# File systems
#
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set

#
# Native Language Support
#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m

#
# Library routines
#
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_XMON is not set
# CONFIG_BDI_SWITCH is not set
CONFIG_BOOTX_TEXT=y

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m

#
# Hardware crypto devices
#

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: Linuv 2.6.15-rc1
  2005-11-12 20:45 ` Linuv 2.6.15-rc1 Michael Buesch
@ 2005-11-12 21:00   ` Linus Torvalds
  2005-11-12 21:37     ` Michael Buesch
  2005-11-12 22:24     ` Benjamin Herrenschmidt
  2005-11-12 21:28   ` PowerBook G4 boot failure " Alexey Dobriyan
  1 sibling, 2 replies; 25+ messages in thread
From: Linus Torvalds @ 2005-11-12 21:00 UTC (permalink / raw)
  To: Michael Buesch, Benjamin Herrenschmidt, Paul Mackerras
  Cc: linuxppc-dev, Linux Kernel Mailing List

On Sat, 12 Nov 2005, Michael Buesch wrote:
> 
> Latest GIT tree does not boot on my G4 PowerBook.

What happens if you do

	make ARCH=powerpc

and build everything that way (including the "config" phase)?

So far ppc32 is still a valid architecture, and your config file makes it 
clear that you've used that. But I suspect most of the active testing has 
been done with the "powerpc" architecture compiled for 32-bit.

That said, the ppc32 tree should still work. BenH? Paul?

		Linus

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: Linuv 2.6.15-rc1
  2005-11-12 21:00   ` Linus Torvalds
@ 2005-11-12 21:37     ` Michael Buesch
  2005-11-12 21:53       ` Adrian Bunk
                         ` (3 more replies)
  2005-11-12 22:24     ` Benjamin Herrenschmidt
  1 sibling, 4 replies; 25+ messages in thread
From: Michael Buesch @ 2005-11-12 21:37 UTC (permalink / raw)
  To: Linus Torvalds, Benjamin Herrenschmidt, Paul Mackerras
  Cc: linuxppc-dev, Linux Kernel Mailing List

[-- Attachment #1: Type: text/plain, Size: 1058 bytes --]

On Saturday 12 November 2005 22:00, you wrote:
> 
> On Sat, 12 Nov 2005, Michael Buesch wrote:
> > 
> > Latest GIT tree does not boot on my G4 PowerBook.
> 
> What happens if you do
> 
> 	make ARCH=powerpc
> 
> and build everything that way (including the "config" phase)?

I did
make mrproper
copy the .config over again
make ARCH=powerpc menuconfig
exit and save from menuconfig
make ARCH=powerpc

The result of the build is:

  CHK     include/linux/version.h
  CHK     include/linux/compile.h
  CHK     usr/initramfs_list
  GEN     .version
  CHK     include/linux/compile.h
  UPD     include/linux/compile.h
  CC      init/version.o
  LD      init/built-in.o
  LD      .tmp_vmlinux1
arch/powerpc/kernel/built-in.o: In function `platform_init':
: undefined reference to `prep_init'
arch/powerpc/kernel/built-in.o:(__ksymtab+0x4d8): undefined reference to `ucSystemType'
arch/powerpc/kernel/built-in.o:(__ksymtab+0x4e0): undefined reference to `_prep_type'
make: *** [.tmp_vmlinux1] Error 1


-- 
Greetings Michael.

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: Linuv 2.6.15-rc1
  2005-11-12 21:37     ` Michael Buesch
@ 2005-11-12 21:53       ` Adrian Bunk
  2005-11-12 21:57         ` Michael Buesch
  2005-11-12 22:08       ` Olof Johansson
                         ` (2 subsequent siblings)
  3 siblings, 1 reply; 25+ messages in thread
From: Adrian Bunk @ 2005-11-12 21:53 UTC (permalink / raw)
  To: Michael Buesch; +Cc: Linus Torvalds, Linux Kernel Mailing List, linuxppc-dev

On Sat, Nov 12, 2005 at 10:37:16PM +0100, Michael Buesch wrote:
> On Saturday 12 November 2005 22:00, you wrote:
> > 
> > On Sat, 12 Nov 2005, Michael Buesch wrote:
> > > 
> > > Latest GIT tree does not boot on my G4 PowerBook.
> > 
> > What happens if you do
> > 
> > 	make ARCH=powerpc
> > 
> > and build everything that way (including the "config" phase)?
> 
> I did
> make mrproper
> copy the .config over again
> make ARCH=powerpc menuconfig
> exit and save from menuconfig
> make ARCH=powerpc
> 
> The result of the build is:
> 
>   CHK     include/linux/version.h
>   CHK     include/linux/compile.h
>   CHK     usr/initramfs_list
>   GEN     .version
>   CHK     include/linux/compile.h
>   UPD     include/linux/compile.h
>   CC      init/version.o
>   LD      init/built-in.o
>   LD      .tmp_vmlinux1
> arch/powerpc/kernel/built-in.o: In function `platform_init':
> : undefined reference to `prep_init'
> arch/powerpc/kernel/built-in.o:(__ksymtab+0x4d8): undefined reference to `ucSystemType'
> arch/powerpc/kernel/built-in.o:(__ksymtab+0x4e0): undefined reference to `_prep_type'
> make: *** [.tmp_vmlinux1] Error 1

Please send your .config .

> Greetings Michael.

cu
Adrian

-- 

       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: Linuv 2.6.15-rc1
  2005-11-12 21:53       ` Adrian Bunk
@ 2005-11-12 21:57         ` Michael Buesch
  2005-11-12 22:20           ` Adrian Bunk
  0 siblings, 1 reply; 25+ messages in thread
From: Michael Buesch @ 2005-11-12 21:57 UTC (permalink / raw)
  To: Adrian Bunk; +Cc: Linus Torvalds, Linux Kernel Mailing List, linuxppc-dev

[-- Attachment #1: Type: text/plain, Size: 847 bytes --]

On Saturday 12 November 2005 22:53, you wrote:
> >   CHK     include/linux/version.h
> >   CHK     include/linux/compile.h
> >   CHK     usr/initramfs_list
> >   GEN     .version
> >   CHK     include/linux/compile.h
> >   UPD     include/linux/compile.h
> >   CC      init/version.o
> >   LD      init/built-in.o
> >   LD      .tmp_vmlinux1
> > arch/powerpc/kernel/built-in.o: In function `platform_init':
> > : undefined reference to `prep_init'
> > arch/powerpc/kernel/built-in.o:(__ksymtab+0x4d8): undefined reference to `ucSystemType'
> > arch/powerpc/kernel/built-in.o:(__ksymtab+0x4e0): undefined reference to `_prep_type'
> > make: *** [.tmp_vmlinux1] Error 1
> 
> Please send your .config .


I did this in my first mail:
http://marc.theaimsgroup.com/?l=linux-kernel&m=113182883102937&q=p5

-- 
Greetings Michael.

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: Linuv 2.6.15-rc1
  2005-11-12 21:57         ` Michael Buesch
@ 2005-11-12 22:20           ` Adrian Bunk
  2005-11-12 22:31             ` Benjamin Herrenschmidt
  0 siblings, 1 reply; 25+ messages in thread
From: Adrian Bunk @ 2005-11-12 22:20 UTC (permalink / raw)
  To: Michael Buesch; +Cc: Linus Torvalds, Linux Kernel Mailing List, linuxppc-dev

On Sat, Nov 12, 2005 at 10:57:05PM +0100, Michael Buesch wrote:
> On Saturday 12 November 2005 22:53, you wrote:
> > >   CHK     include/linux/version.h
> > >   CHK     include/linux/compile.h
> > >   CHK     usr/initramfs_list
> > >   GEN     .version
> > >   CHK     include/linux/compile.h
> > >   UPD     include/linux/compile.h
> > >   CC      init/version.o
> > >   LD      init/built-in.o
> > >   LD      .tmp_vmlinux1
> > > arch/powerpc/kernel/built-in.o: In function `platform_init':
> > > : undefined reference to `prep_init'
> > > arch/powerpc/kernel/built-in.o:(__ksymtab+0x4d8): undefined reference to `ucSystemType'
> > > arch/powerpc/kernel/built-in.o:(__ksymtab+0x4e0): undefined reference to `_prep_type'
> > > make: *** [.tmp_vmlinux1] Error 1

ucSystemType is a variable that is EXPORT_SYMBOL'ed but never used in 
any way.

_prep_type is a variable that is needlessly EXPORT_SYMBOL'ed.


But prep_init points to the real problem:

CONFIG_PPC_PREP requires code from arch/ppc/platforms/, but this 
directory is never visited.

What is the correct fix?
Migrate the code from arch/ppc/platforms/ to arch/powerpc/platforms/ ?

> > Please send your .config .
> 
> 
> I did this in my first mail:
> http://marc.theaimsgroup.com/?l=linux-kernel&m=113182883102937&q=p5

OK, thanks, I missed this email.

> Greetings Michael.

cu
Adrian

-- 

       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: Linuv 2.6.15-rc1
  2005-11-12 22:20           ` Adrian Bunk
@ 2005-11-12 22:31             ` Benjamin Herrenschmidt
  2005-11-12 23:51               ` Ulrich Teichert
                                 ` (2 more replies)
  0 siblings, 3 replies; 25+ messages in thread
From: Benjamin Herrenschmidt @ 2005-11-12 22:31 UTC (permalink / raw)
  To: Adrian Bunk
  Cc: linuxppc-dev, Linus Torvalds, Michael Buesch,
	Linux Kernel Mailing List


> ucSystemType is a variable that is EXPORT_SYMBOL'ed but never used in 
> any way.
> 
> _prep_type is a variable that is needlessly EXPORT_SYMBOL'ed.

Therse are old PREP stuffs

> But prep_init points to the real problem:
> 
> CONFIG_PPC_PREP requires code from arch/ppc/platforms/, but this 
> directory is never visited.
> 
> What is the correct fix?
> Migrate the code from arch/ppc/platforms/ to arch/powerpc/platforms/ ?

Yes, PREP need to be migrated, but that includes adding some minimum
device-tree support for it among others. And few people still have PREP
machines, I'm not even sure we have access to one here in ozlabs... I
think for 2.6.15, we'd better just disable it in .config for
ARCH=powerpc.

Ben.

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: Linuv 2.6.15-rc1
  2005-11-12 22:31             ` Benjamin Herrenschmidt
@ 2005-11-12 23:51               ` Ulrich Teichert
  2005-11-13  9:17                 ` Geert Uytterhoeven
  2005-11-13  1:26               ` [2.6 patch] PPC_PREP: remove unneeded exports Adrian Bunk
  2005-11-14 19:56               ` Linuv 2.6.15-rc1 Tom Rini
  2 siblings, 1 reply; 25+ messages in thread
From: Ulrich Teichert @ 2005-11-12 23:51 UTC (permalink / raw)
  To: Benjamin Herrenschmidt; +Cc: linuxppc-dev

Hi,

[trimmed the cc list a bit]
>Yes, PREP need to be migrated, but that includes adding some minimum
>device-tree support for it among others. And few people still have PREP
>machines, I'm not even sure we have access to one here in ozlabs... I
>think for 2.6.15, we'd better just disable it in .config for
>ARCH=powerpc.

for what's it worth, I'm still owning:

wehrle:~> uname -a
Linux wehrle 2.4.19 #3 Sun Aug 4 08:28:30 BST 2002 ppc unknown
wehrle:~> cat /proc/cpuinfo 
cpu             : 604r
clock           : 199MHz
revision        : 18.3 (pvr 0009 1203)
bogomips        : 397.31
machine         : PReP IBM 43P-140 (Tiger1)
upgrade cpu     : not present
scsi fuse       : ok
simms           : 1:128MiB 2:128MiB 3:128MiB 4:128MiB 5:128MiB 
l2 cache        : sync burst, parity, 1MiB

and

sed:~> uname -a
Linux sed 2.4.28 #8 Mon Dec 13 22:16:08 CET 2004 ppc unknown
sed:~> cat /proc/cpuinfo 
processor       : 0
cpu             : 604r
clock           : ???
revision        : 49.2 (pvr 0009 3102)
bogomips        : 299.00
machine         : PReP Utah (Powerstack II Pro4000)
l2 cache        : 512KiB, parity disabled SRAM:synchronous, pipelined, no parity

Especially the 43p-140 is quite easy to get via ebay, the Powerstack II
is a more rare machine nowadays, I think.

HTH,
Uli
-- 
Dipl. Inf. Ulrich Teichert|e-mail: Ulrich.Teichert@gmx.de
Stormweg 24               |listening to: Suicide Drive (The Deep Eynde)
24539 Neumuenster, Germany|Public Pervert (Interpol) Cauchemar (Opération S)

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: Linuv 2.6.15-rc1
  2005-11-12 23:51               ` Ulrich Teichert
@ 2005-11-13  9:17                 ` Geert Uytterhoeven
  2005-11-13 14:46                   ` Powerstack II (was: Re: Linuv 2.6.15-rc1) Ulrich Teichert
  0 siblings, 1 reply; 25+ messages in thread
From: Geert Uytterhoeven @ 2005-11-13  9:17 UTC (permalink / raw)
  To: Ulrich Teichert; +Cc: Linux/PPC Development

On Sun, 13 Nov 2005, Ulrich Teichert wrote:
> Especially the 43p-140 is quite easy to get via ebay, the Powerstack II
> is a more rare machine nowadays, I think.
                         ^^^^^^^^
Probably because almost no one managed to buy one originally in the first
place? :-)

I tried a long time ago, but the people at the Motorola PowerPC booth at CeBIT
didn't even know about their own machines...

Gr{oetje,eeting}s,

						Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
							    -- Linus Torvalds

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Powerstack II (was: Re: Linuv 2.6.15-rc1)
  2005-11-13  9:17                 ` Geert Uytterhoeven
@ 2005-11-13 14:46                   ` Ulrich Teichert
  0 siblings, 0 replies; 25+ messages in thread
From: Ulrich Teichert @ 2005-11-13 14:46 UTC (permalink / raw)
  To: Geert Uytterhoeven; +Cc: Linux/PPC Development

Hi,

>On Sun, 13 Nov 2005, Ulrich Teichert wrote:
>> Especially the 43p-140 is quite easy to get via ebay, the Powerstack II
>> is a more rare machine nowadays, I think.
>                         ^^^^^^^^
>Probably because almost no one managed to buy one originally in the first
>place? :-)

I think they got sold more often in the project business, not to
"ordinary people", but I may be wrong ;-)

>I tried a long time ago, but the people at the Motorola PowerPC booth at CeBIT
>didn't even know about their own machines...

They show up on ebay from time to time, but spare parts are hard to
get. I'm searching for a hard disk tray since I got mine in 2003,
but I managed to find a tray for the floppy,

CU,
Uli
-- 
Dipl. Inf. Ulrich Teichert|e-mail: Ulrich.Teichert@gmx.de
Stormweg 24               |listening to: Suicide Drive (The Deep Eynde)
24539 Neumuenster, Germany|Public Pervert (Interpol) Cauchemar (Opération S)

^ permalink raw reply	[flat|nested] 25+ messages in thread

* [2.6 patch] PPC_PREP: remove unneeded exports
  2005-11-12 22:31             ` Benjamin Herrenschmidt
  2005-11-12 23:51               ` Ulrich Teichert
@ 2005-11-13  1:26               ` Adrian Bunk
  2005-11-13  3:23                 ` Benjamin Herrenschmidt
  2005-11-14 19:56               ` Linuv 2.6.15-rc1 Tom Rini
  2 siblings, 1 reply; 25+ messages in thread
From: Adrian Bunk @ 2005-11-13  1:26 UTC (permalink / raw)
  To: Benjamin Herrenschmidt
  Cc: linuxppc-dev, Linus Torvalds, Michael Buesch,
	Linux Kernel Mailing List

On Sun, Nov 13, 2005 at 09:31:06AM +1100, Benjamin Herrenschmidt wrote:
> 
> > ucSystemType is a variable that is EXPORT_SYMBOL'ed but never used in 
> > any way.
> > 
> > _prep_type is a variable that is needlessly EXPORT_SYMBOL'ed.
> 
> Therse are old PREP stuffs
>...

Is the patch below OK?

> Ben.

cu
Adrian


<--  snip  -->


This patch removes the EXPORT_SYMBOL'ed but completely unused variable 
ucSystemType and removes the unneeded EXPORT_SYMBOL(_prep_type).


Signed-off-by: Adrian Bunk <bunk@stusta.de>

---

 arch/powerpc/kernel/ppc_ksyms.c |    5 -----
 arch/ppc/kernel/ppc_ksyms.c     |    4 ----
 arch/ppc/platforms/prep_setup.c |    1 -
 include/asm-powerpc/processor.h |    1 -
 4 files changed, 11 deletions(-)

--- linux-2.6.15-rc1/include/asm-powerpc/processor.h.old	2005-11-13 01:44:12.000000000 +0100
+++ linux-2.6.15-rc1/include/asm-powerpc/processor.h	2005-11-13 01:44:25.000000000 +0100
@@ -68,7 +68,6 @@
  * vendor. Board revision is also made available. This will be moved
  * elsewhere soon
  */
-extern unsigned char ucSystemType;
 extern unsigned char ucBoardRev;
 extern unsigned char ucBoardRevMaj, ucBoardRevMin;
 
--- linux-2.6.15-rc1/arch/ppc/platforms/prep_setup.c.old	2005-11-13 01:44:36.000000000 +0100
+++ linux-2.6.15-rc1/arch/ppc/platforms/prep_setup.c	2005-11-13 01:44:40.000000000 +0100
@@ -72,7 +72,6 @@
 
 TODC_ALLOC();
 
-unsigned char ucSystemType;
 unsigned char ucBoardRev;
 unsigned char ucBoardRevMaj, ucBoardRevMin;
 
--- linux-2.6.15-rc1/arch/ppc/kernel/ppc_ksyms.c.old	2005-11-13 01:44:49.000000000 +0100
+++ linux-2.6.15-rc1/arch/ppc/kernel/ppc_ksyms.c	2005-11-13 01:44:54.000000000 +0100
@@ -82,10 +82,6 @@
 EXPORT_SYMBOL(ISA_DMA_THRESHOLD);
 EXPORT_SYMBOL(DMA_MODE_READ);
 EXPORT_SYMBOL(DMA_MODE_WRITE);
-#if defined(CONFIG_PPC_PREP)
-EXPORT_SYMBOL(_prep_type);
-EXPORT_SYMBOL(ucSystemType);
-#endif
 
 #if !defined(__INLINE_BITOPS)
 EXPORT_SYMBOL(set_bit);
--- linux-2.6.15-rc1/arch/powerpc/kernel/ppc_ksyms.c.old	2005-11-13 01:45:06.000000000 +0100
+++ linux-2.6.15-rc1/arch/powerpc/kernel/ppc_ksyms.c	2005-11-13 01:45:12.000000000 +0100
@@ -76,11 +76,6 @@
 EXPORT_SYMBOL(sys_sigreturn);
 #endif
 
-#if defined(CONFIG_PPC_PREP)
-EXPORT_SYMBOL(_prep_type);
-EXPORT_SYMBOL(ucSystemType);
-#endif
-
 EXPORT_SYMBOL(strcpy);
 EXPORT_SYMBOL(strncpy);
 EXPORT_SYMBOL(strcat);

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [2.6 patch] PPC_PREP: remove unneeded exports
  2005-11-13  1:26               ` [2.6 patch] PPC_PREP: remove unneeded exports Adrian Bunk
@ 2005-11-13  3:23                 ` Benjamin Herrenschmidt
  0 siblings, 0 replies; 25+ messages in thread
From: Benjamin Herrenschmidt @ 2005-11-13  3:23 UTC (permalink / raw)
  To: Adrian Bunk
  Cc: linuxppc-dev, Linus Torvalds, Michael Buesch,
	Linux Kernel Mailing List

On Sun, 2005-11-13 at 02:26 +0100, Adrian Bunk wrote:
> On Sun, Nov 13, 2005 at 09:31:06AM +1100, Benjamin Herrenschmidt wrote:
> > 
> > > ucSystemType is a variable that is EXPORT_SYMBOL'ed but never used in 
> > > any way.
> > > 
> > > _prep_type is a variable that is needlessly EXPORT_SYMBOL'ed.
> > 
> > Therse are old PREP stuffs
> >...
> 
> Is the patch below OK?

The ucXXX variables should probably go (or at least be unexported) but I
would keep the _prep_type export for now, unless we are certain no
driver and no out of tree stuff neither uses it (hrm... might well be
the case).

In any case, the proper fix is probably to move the EXPORT_SYMBOL() out
of ppc_ksyms, and have it next to the declaration of the variable.

Ben.

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: Linuv 2.6.15-rc1
  2005-11-12 22:31             ` Benjamin Herrenschmidt
  2005-11-12 23:51               ` Ulrich Teichert
  2005-11-13  1:26               ` [2.6 patch] PPC_PREP: remove unneeded exports Adrian Bunk
@ 2005-11-14 19:56               ` Tom Rini
  2 siblings, 0 replies; 25+ messages in thread
From: Tom Rini @ 2005-11-14 19:56 UTC (permalink / raw)
  To: Benjamin Herrenschmidt
  Cc: Linux Kernel Mailing List, Adrian Bunk, linuxppc-dev,
	Linus Torvalds, Michael Buesch

On Sun, Nov 13, 2005 at 09:31:06AM +1100, Benjamin Herrenschmidt wrote:
> 
> > ucSystemType is a variable that is EXPORT_SYMBOL'ed but never used in 
> > any way.
> > 
> > _prep_type is a variable that is needlessly EXPORT_SYMBOL'ed.
> 
> Therse are old PREP stuffs
> 
> > But prep_init points to the real problem:
> > 
> > CONFIG_PPC_PREP requires code from arch/ppc/platforms/, but this 
> > directory is never visited.
> > 
> > What is the correct fix?
> > Migrate the code from arch/ppc/platforms/ to arch/powerpc/platforms/ ?
> 
> Yes, PREP need to be migrated, but that includes adding some minimum
> device-tree support for it among others. And few people still have PREP
> machines, I'm not even sure we have access to one here in ozlabs... I
> think for 2.6.15, we'd better just disable it in .config for
> ARCH=powerpc.

I think we really should just drop _prep_type from being exported.  the
uc* stuff doesn't look to be used, but we can clean that up as its
converted to arch/powerpc.  But I don't think anything out of tree uses
_prep_type (it's used at a very low level, it really couldn't be used at
the modular level).

As an occasional PReP monkey,
Acked-by: Tom Rini <trini@kernel.crashing.org>

-- 
Tom Rini
http://gate.crashing.org/~trini/

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: Linuv 2.6.15-rc1
  2005-11-12 21:37     ` Michael Buesch
  2005-11-12 21:53       ` Adrian Bunk
@ 2005-11-12 22:08       ` Olof Johansson
  2005-11-12 22:25       ` Benjamin Herrenschmidt
  2005-11-14  1:04       ` Jesper Juhl
  3 siblings, 0 replies; 25+ messages in thread
From: Olof Johansson @ 2005-11-12 22:08 UTC (permalink / raw)
  To: Michael Buesch; +Cc: Linus Torvalds, Linux Kernel Mailing List, linuxppc-dev

On Sat, Nov 12, 2005 at 10:37:16PM +0100, Michael Buesch wrote:

> The result of the build is:
> 
>   CHK     include/linux/version.h
>   CHK     include/linux/compile.h
>   CHK     usr/initramfs_list
>   GEN     .version
>   CHK     include/linux/compile.h
>   UPD     include/linux/compile.h
>   CC      init/version.o
>   LD      init/built-in.o
>   LD      .tmp_vmlinux1
> arch/powerpc/kernel/built-in.o: In function `platform_init':
> : undefined reference to `prep_init'
> arch/powerpc/kernel/built-in.o:(__ksymtab+0x4d8): undefined reference to `ucSystemType'
> arch/powerpc/kernel/built-in.o:(__ksymtab+0x4e0): undefined reference to `_prep_type'
> make: *** [.tmp_vmlinux1] Error 1

Disabling CONFIG_PPC_PREP and CONFIG_PPC_CHRP will work around it for
now, neither are needed for a powermac.


-Olof

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: Linuv 2.6.15-rc1
  2005-11-12 21:37     ` Michael Buesch
  2005-11-12 21:53       ` Adrian Bunk
  2005-11-12 22:08       ` Olof Johansson
@ 2005-11-12 22:25       ` Benjamin Herrenschmidt
  2005-11-12 22:33         ` Michael Buesch
  2005-11-13 16:37         ` Kumar Gala
  2005-11-14  1:04       ` Jesper Juhl
  3 siblings, 2 replies; 25+ messages in thread
From: Benjamin Herrenschmidt @ 2005-11-12 22:25 UTC (permalink / raw)
  To: Michael Buesch; +Cc: linuxppc-dev, Linus Torvalds, Linux Kernel Mailing List

On Sat, 2005-11-12 at 22:37 +0100, Michael Buesch wrote:
> On Saturday 12 November 2005 22:00, you wrote:
> > 
> > On Sat, 12 Nov 2005, Michael Buesch wrote:
> > > 
> > > Latest GIT tree does not boot on my G4 PowerBook.
> > 
> > What happens if you do
> > 
> > 	make ARCH=powerpc
> > 
> > and build everything that way (including the "config" phase)?
> 
> I did
> make mrproper
> copy the .config over again
> make ARCH=powerpc menuconfig
> exit and save from menuconfig
> make ARCH=powerpc

You need to disable PREP support when building with ARCH=powerpc for 32
bits, it doesn't build (yet). We should remove it from Kconfig...

Also, there is an issue with the make clean stuff, make sure when
switching archs to also remove arch/powerpc/include/asm symlink before
trying to build.

Ben.

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: Linuv 2.6.15-rc1
  2005-11-12 22:25       ` Benjamin Herrenschmidt
@ 2005-11-12 22:33         ` Michael Buesch
  2005-11-13 16:37         ` Kumar Gala
  1 sibling, 0 replies; 25+ messages in thread
From: Michael Buesch @ 2005-11-12 22:33 UTC (permalink / raw)
  To: Benjamin Herrenschmidt
  Cc: linuxppc-dev, Linus Torvalds, Linux Kernel Mailing List

[-- Attachment #1: Type: text/plain, Size: 1003 bytes --]

On Saturday 12 November 2005 23:25, you wrote:
> On Sat, 2005-11-12 at 22:37 +0100, Michael Buesch wrote:
> > On Saturday 12 November 2005 22:00, you wrote:
> > > 
> > > On Sat, 12 Nov 2005, Michael Buesch wrote:
> > > > 
> > > > Latest GIT tree does not boot on my G4 PowerBook.
> > > 
> > > What happens if you do
> > > 
> > > 	make ARCH=powerpc
> > > 
> > > and build everything that way (including the "config" phase)?
> > 
> > I did
> > make mrproper
> > copy the .config over again
> > make ARCH=powerpc menuconfig
> > exit and save from menuconfig
> > make ARCH=powerpc
> 
> You need to disable PREP support when building with ARCH=powerpc for 32
> bits, it doesn't build (yet). We should remove it from Kconfig...
> 
> Also, there is an issue with the make clean stuff, make sure when
> switching archs to also remove arch/powerpc/include/asm symlink before
> trying to build.

Ok, thanks Ben.
ARCH=powerpc without PREP builds and boots.

-- 
Greetings Michael.

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: Linuv 2.6.15-rc1
  2005-11-12 22:25       ` Benjamin Herrenschmidt
  2005-11-12 22:33         ` Michael Buesch
@ 2005-11-13 16:37         ` Kumar Gala
  2005-11-13 20:59           ` Benjamin Herrenschmidt
  1 sibling, 1 reply; 25+ messages in thread
From: Kumar Gala @ 2005-11-13 16:37 UTC (permalink / raw)
  To: Paul Mackerras
  Cc: ppc-dev list, Linus Torvalds, Michael Buesch,
	Linux Kernel Mailing List


On Nov 12, 2005, at 4:25 PM, Benjamin Herrenschmidt wrote:

> On Sat, 2005-11-12 at 22:37 +0100, Michael Buesch wrote:
>> On Saturday 12 November 2005 22:00, you wrote:
>>>
>>> On Sat, 12 Nov 2005, Michael Buesch wrote:
>>>>
>>>> Latest GIT tree does not boot on my G4 PowerBook.
>>>
>>> What happens if you do
>>>
>>> 	make ARCH=powerpc
>>>
>>> and build everything that way (including the "config" phase)?
>>
>> I did
>> make mrproper
>> copy the .config over again
>> make ARCH=powerpc menuconfig
>> exit and save from menuconfig
>> make ARCH=powerpc
>
> You need to disable PREP support when building with ARCH=powerpc  
> for 32
> bits, it doesn't build (yet). We should remove it from Kconfig...
>
> Also, there is an issue with the make clean stuff, make sure when
> switching archs to also remove arch/powerpc/include/asm symlink before
> trying to build.

Can we please add some defconfigs for arch/powerpc to possibly help  
with this issue.  I'm think a pmac32, pmac64, and whatever other 64  
bit configs would be a good start.

- kumar

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: Linuv 2.6.15-rc1
  2005-11-13 16:37         ` Kumar Gala
@ 2005-11-13 20:59           ` Benjamin Herrenschmidt
  2005-11-15 18:53             ` Olaf Hering
  0 siblings, 1 reply; 25+ messages in thread
From: Benjamin Herrenschmidt @ 2005-11-13 20:59 UTC (permalink / raw)
  To: Kumar Gala
  Cc: ppc-dev list, Linus Torvalds, Michael Buesch,
	Linux Kernel Mailing List

On Sun, 2005-11-13 at 10:37 -0600, Kumar Gala wrote:

> Can we please add some defconfigs for arch/powerpc to possibly help  
> with this issue.  I'm think a pmac32, pmac64, and whatever other 64  
> bit configs would be a good start.

The 64 bits defconfigs are there already. I'll do a pmac one.

Ben.

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: Linuv 2.6.15-rc1
  2005-11-13 20:59           ` Benjamin Herrenschmidt
@ 2005-11-15 18:53             ` Olaf Hering
  0 siblings, 0 replies; 25+ messages in thread
From: Olaf Hering @ 2005-11-15 18:53 UTC (permalink / raw)
  To: Benjamin Herrenschmidt
  Cc: Linux Kernel Mailing List, ppc-dev list, Linus Torvalds,
	Michael Buesch

 On Mon, Nov 14, Benjamin Herrenschmidt wrote:

> On Sun, 2005-11-13 at 10:37 -0600, Kumar Gala wrote:
> 
> > Can we please add some defconfigs for arch/powerpc to possibly help  
> > with this issue.  I'm think a pmac32, pmac64, and whatever other 64  
> > bit configs would be a good start.
> 
> The 64 bits defconfigs are there already. I'll do a pmac one.

Can you move also arch/ppc64/defconfig into arch/powerpc/configs/?

-- 
short story of a lazy sysadmin:
 alias appserv=wotan

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: Linuv 2.6.15-rc1
  2005-11-12 21:37     ` Michael Buesch
                         ` (2 preceding siblings ...)
  2005-11-12 22:25       ` Benjamin Herrenschmidt
@ 2005-11-14  1:04       ` Jesper Juhl
  3 siblings, 0 replies; 25+ messages in thread
From: Jesper Juhl @ 2005-11-14  1:04 UTC (permalink / raw)
  To: Michael Buesch; +Cc: Linus Torvalds, Linux Kernel Mailing List, linuxppc-dev

On 11/12/05, Michael Buesch <mbuesch@freenet.de> wrote:
> On Saturday 12 November 2005 22:00, you wrote:
> >
> > On Sat, 12 Nov 2005, Michael Buesch wrote:
> > >
> > > Latest GIT tree does not boot on my G4 PowerBook.
> >
> > What happens if you do
> >
> >       make ARCH=3Dpowerpc
> >
> > and build everything that way (including the "config" phase)?
>
> I did
> make mrproper
> copy the .config over again

are you not missing a "make oldconfig" step here?

> make ARCH=3Dpowerpc menuconfig


--
Jesper Juhl <jesper.juhl@gmail.com>
Don't top-post  http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please      http://www.expita.com/nomime.html

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: Linuv 2.6.15-rc1
  2005-11-12 21:00   ` Linus Torvalds
  2005-11-12 21:37     ` Michael Buesch
@ 2005-11-12 22:24     ` Benjamin Herrenschmidt
  2005-11-12 23:13       ` asm/delay.h missing on powerpc (was: Re: Linuv 2.6.15-rc1) Michael Buesch
  1 sibling, 1 reply; 25+ messages in thread
From: Benjamin Herrenschmidt @ 2005-11-12 22:24 UTC (permalink / raw)
  To: Linus Torvalds; +Cc: linuxppc-dev, Michael Buesch, Linux Kernel Mailing List

On Sat, 2005-11-12 at 13:00 -0800, Linus Torvalds wrote:
> 
> On Sat, 12 Nov 2005, Michael Buesch wrote:
> > 
> > Latest GIT tree does not boot on my G4 PowerBook.
> 
> What happens if you do
> 
> 	make ARCH=powerpc
> 
> and build everything that way (including the "config" phase)?
> 
> So far ppc32 is still a valid architecture, and your config file makes it 
> clear that you've used that. But I suspect most of the active testing has 
> been done with the "powerpc" architecture compiled for 32-bit.
> 
> That said, the ppc32 tree should still work. BenH? Paul?

Ìt should still work. I'm running -rc1 with "powerpc" on mine so that at
least works, it's possible that we broke "ppc", I'll have a look and
send a fix.

Ben.

^ permalink raw reply	[flat|nested] 25+ messages in thread

* asm/delay.h missing on powerpc (was: Re: Linuv 2.6.15-rc1)
  2005-11-12 22:24     ` Benjamin Herrenschmidt
@ 2005-11-12 23:13       ` Michael Buesch
  2005-11-13  0:33         ` Benjamin Herrenschmidt
  0 siblings, 1 reply; 25+ messages in thread
From: Michael Buesch @ 2005-11-12 23:13 UTC (permalink / raw)
  To: Benjamin Herrenschmidt; +Cc: linuxppc-dev, Linux Kernel Mailing List

[-- Attachment #1: Type: text/plain, Size: 430 bytes --]

On Saturday 12 November 2005 23:24, you wrote:
> Ìt should still work. I'm running -rc1 with "powerpc" on mine so that at
> least works, it's possible that we broke "ppc", I'll have a look and
> send a fix.

powerpc arch builds and runs now, but
I have problems compiling the bcm430x driver. It includes linux/delay.h.
linux/delay.h includes asm/delay.h, which does not exist.
What to do now?

-- 
Greetings Michael.

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: asm/delay.h missing on powerpc (was: Re: Linuv 2.6.15-rc1)
  2005-11-12 23:13       ` asm/delay.h missing on powerpc (was: Re: Linuv 2.6.15-rc1) Michael Buesch
@ 2005-11-13  0:33         ` Benjamin Herrenschmidt
  2005-11-13  9:54           ` Michael Buesch
  0 siblings, 1 reply; 25+ messages in thread
From: Benjamin Herrenschmidt @ 2005-11-13  0:33 UTC (permalink / raw)
  To: Michael Buesch; +Cc: linuxppc-dev, Linux Kernel Mailing List

On Sun, 2005-11-13 at 00:13 +0100, Michael Buesch wrote:
> On Saturday 12 November 2005 23:24, you wrote:
> > Ìt should still work. I'm running -rc1 with "powerpc" on mine so that at
> > least works, it's possible that we broke "ppc", I'll have a look and
> > send a fix.
> 
> powerpc arch builds and runs now, but
> I have problems compiling the bcm430x driver. It includes linux/delay.h.
> linux/delay.h includes asm/delay.h, which does not exist.
> What to do now?

I suspect that building drivers out of tree doesn't work very well with
the new "merged" architecture where includes are split between asm/ppc
and asm-powerpc... You should make sure that you build the driver with
the same ARCH as the kernel, that is ARCH=powerpc at least, if we got
the Makefiles right, that should give you all the headers...

(building glibc is definitely a pain :)

Ben.

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: asm/delay.h missing on powerpc (was: Re: Linuv 2.6.15-rc1)
  2005-11-13  0:33         ` Benjamin Herrenschmidt
@ 2005-11-13  9:54           ` Michael Buesch
  0 siblings, 0 replies; 25+ messages in thread
From: Michael Buesch @ 2005-11-13  9:54 UTC (permalink / raw)
  To: Benjamin Herrenschmidt; +Cc: linuxppc-dev, Linux Kernel Mailing List

[-- Attachment #1: Type: text/plain, Size: 1143 bytes --]

On Sunday 13 November 2005 01:33, you wrote:
> On Sun, 2005-11-13 at 00:13 +0100, Michael Buesch wrote:
> > On Saturday 12 November 2005 23:24, you wrote:
> > > Ìt should still work. I'm running -rc1 with "powerpc" on mine so that at
> > > least works, it's possible that we broke "ppc", I'll have a look and
> > > send a fix.
> > 
> > powerpc arch builds and runs now, but
> > I have problems compiling the bcm430x driver. It includes linux/delay.h.
> > linux/delay.h includes asm/delay.h, which does not exist.
> > What to do now?
> 
> I suspect that building drivers out of tree doesn't work very well with
> the new "merged" architecture where includes are split between asm/ppc
> and asm-powerpc... You should make sure that you build the driver with
> the same ARCH as the kernel, that is ARCH=powerpc at least, if we got
> the Makefiles right, that should give you all the headers...

Call me an idiot ;)
doing make ARCH=powerpc in the driver works perfectly fine.

> (building glibc is definitely a pain :)

Try out the stable LFS book. It will guilde you trough it step by step. ;)

-- 
Greetings Michael.

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 25+ messages in thread

* PowerBook G4 boot failure (was: Re: Linuv 2.6.15-rc1)
  2005-11-12 20:45 ` Linuv 2.6.15-rc1 Michael Buesch
  2005-11-12 21:00   ` Linus Torvalds
@ 2005-11-12 21:28   ` Alexey Dobriyan
  1 sibling, 0 replies; 25+ messages in thread
From: Alexey Dobriyan @ 2005-11-12 21:28 UTC (permalink / raw)
  To: Michael Buesch; +Cc: linuxppc-dev, Linus Torvalds, linux-kernel

On Sat, Nov 12, 2005 at 09:45:38PM +0100, Michael Buesch wrote:
> Latest GIT tree does not boot on my G4 PowerBook.
> It freezes after displaying:
>
> Welcome to Linux, kernel 2.6.15-rc1-g44e6f84e
>
> linked at		: 0xc0000000
> frame buffer at	: 0xb8008000  (phys), 0xd000800  (log)
> klimit		: 0xc03f5ae4
> MSR		: 0x00003030
> HID0		: 0x8410c0bc

> This is a 15 inch post feb2005 PowerBook G4.
>
> 2.6.14 properly boots with the same config.

Unless someone else would come up with better idea, you can always do:

	git bisect start
	git bisect bad 44e6f84e3597905816a0440e7218d2ed072120da
	git bisect start 741b2252a5e14d6c60a913c77a6099abe73a854a
		Bisecting: 2021 revisions left to test after this
		[739cafd316235fc55463849e80710f2ca308b9ae] [XFS] fix PBF_NONE handling
	make
		...
		[reboot]
	git bisect good		# if it boots
		or
	git bisect bad		# if it doesn't
	make
		...
		[reboot]

"2021" suggests that it would take 10 or so recompiles to identify bad
commit.

^ permalink raw reply	[flat|nested] 25+ messages in thread

end of thread, other threads:[~2005-11-15 18:53 UTC | newest]

Thread overview: 25+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
     [not found] <Pine.LNX.4.64.0511111753080.3263@g5.osdl.org>
2005-11-12 20:45 ` Linuv 2.6.15-rc1 Michael Buesch
2005-11-12 21:00   ` Linus Torvalds
2005-11-12 21:37     ` Michael Buesch
2005-11-12 21:53       ` Adrian Bunk
2005-11-12 21:57         ` Michael Buesch
2005-11-12 22:20           ` Adrian Bunk
2005-11-12 22:31             ` Benjamin Herrenschmidt
2005-11-12 23:51               ` Ulrich Teichert
2005-11-13  9:17                 ` Geert Uytterhoeven
2005-11-13 14:46                   ` Powerstack II (was: Re: Linuv 2.6.15-rc1) Ulrich Teichert
2005-11-13  1:26               ` [2.6 patch] PPC_PREP: remove unneeded exports Adrian Bunk
2005-11-13  3:23                 ` Benjamin Herrenschmidt
2005-11-14 19:56               ` Linuv 2.6.15-rc1 Tom Rini
2005-11-12 22:08       ` Olof Johansson
2005-11-12 22:25       ` Benjamin Herrenschmidt
2005-11-12 22:33         ` Michael Buesch
2005-11-13 16:37         ` Kumar Gala
2005-11-13 20:59           ` Benjamin Herrenschmidt
2005-11-15 18:53             ` Olaf Hering
2005-11-14  1:04       ` Jesper Juhl
2005-11-12 22:24     ` Benjamin Herrenschmidt
2005-11-12 23:13       ` asm/delay.h missing on powerpc (was: Re: Linuv 2.6.15-rc1) Michael Buesch
2005-11-13  0:33         ` Benjamin Herrenschmidt
2005-11-13  9:54           ` Michael Buesch
2005-11-12 21:28   ` PowerBook G4 boot failure " Alexey Dobriyan

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).