From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from smtp.263.net (263.net.cn [211.150.96.21]) by ozlabs.org (Postfix) with ESMTP id 586F768749 for ; Wed, 16 Nov 2005 23:18:47 +1100 (EST) Received: from 263.net (smtp1 [127.0.0.1]) by smtp.263.net (Postfix) with ESMTP id 1C1BD1FD0 for ; Wed, 16 Nov 2005 20:18:46 +0800 (CST) (envelope-from mqy@263.net.cn) Received: from image (unknown [221.232.15.178]) by 263.net (Postfix) with ESMTP for ; Wed, 16 Nov 2005 20:18:45 +0800 (CST) From: "KylongMu" To: Date: Wed, 16 Nov 2005 20:18:31 +0800 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_NextPart_000_0005_01C5EAEA.EC64E810" In-Reply-To: Message-Id: <20051116121846.1C1BD1FD0@smtp.263.net> Subject: 11-16-05 2.6.14 on AMCC Yosemite board(PCI-IDE card boot error) List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , This is a multi-part message in MIME format. ------=_NextPart_000_0005_01C5EAEA.EC64E810 Content-Type: multipart/alternative; boundary="----=_NextPart_001_0006_01C5EAEA.EC64E810" ------=_NextPart_001_0006_01C5EAEA.EC64E810 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Dear Denk, Thanks for your help; it makes my Yosemite run up! I'm try to add a PCI-IDE Card on it. I test my Promise-PDC20268 card and AEC6280 (ATP865-B chip type) card, Both of them all failed with same error, the boot message included in the attachment. The kernel configure is based on the Yosemite_defconfig, add with: Device Drivers--> ATA/ATAPI/MFM/RLL support--> [*]AEC62XX Chipset support [*]PROMISE PDC202{68|69|70|71|75|76|77} SUPPORT Both of the PCI-IDE cards can work with X86PC+FEDORA4 configure, I don't know What cause them fail on Yosemite with final 2.6.14 kernel. About my 2.6.14 tree, I type with "cg-log -s" command it shows: 99a21389c2b0e55f30b6cf6550cb492b87dbaa3b Heiko Schocher 2005-11-11 12:47 [PATCH] ppc32: fix Kernel Panic for PM82x Board with gcc-4.0. ff1df84b3c3154ffdb646941e1c70d17554e3042 Wolfgang Denk 2005-11-10 00:41 Merge with /home/wd/git/linux-2.6/stefan_roese It only shows 2.6.14 on the kernel message, I don't know why it doesn't show the message as you told. But it can work, and fixed the bugs on Yosemite. Cordially, Kylong Mu ------=_NextPart_001_0006_01C5EAEA.EC64E810 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable

Dear Denk,

Thanks for your help; it makes my Yosemite = run up! I'm try to add a PCI-IDE

Card on it. I test my Promise-PDC20268 card and AEC6280 (ATP865-B chip type) = card,

Both of them all = failed with same error, the boot message included in the = attachment.

= The kernel configure is based on the Yosemite_defconfig, add = with:

Device = Drivers-->

= = ATA/ATAPI/MFM/RLL support-->

= &= nbsp; &n= bsp; &nb= sp; [*]AEC62XX Chipset support = &= nbsp;

= &= nbsp; &n= bsp; &nb= sp; [*]PROMISE PDC202{68|69|70|71|75|76|77} SUPPORT =

=

Both of the PCI-IDE cards can work with X86PC+FEDORA4 configure, I = don’t know

What cause them fail = on Yosemite with final 2.6.14 kernel.

About my 2.6.14 tree, I type with = “cg-log –s” command it shows:

99a21389c2b0e55f30b6cf6550cb492b87dbaa3b Heiko = Schocher 2005-11-11 12:47 [PATCH] ppc32: fix = Kernel Panic for PM82x Board with gcc-4.0.

ff1df84b3c3154ffdb646941e1c70d17554e3042 Wolfgang = Denk 2005-11-10 00:41 Merge with = /home/wd/git/linux-2.6/stefan_roese

=

It only shows 2.6.14 on the kernel message, I = don’t know why it doesn’t show the message as you = told.

But it can work, and = fixed the bugs on Yosemite.

=

Cordially,=

Kylong = Mu

=

=

------=_NextPart_001_0006_01C5EAEA.EC64E810-- ------=_NextPart_000_0005_01C5EAEA.EC64E810 Content-Type: text/plain; name="bootmessage(acard6280 pci-ide card).txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="bootmessage(acard6280 pci-ide card).txt" U-Boot 1.1.4 (Nov 11 2005 - 19:35:30)=0A= =0A= AMCC PowerPC 440EP Rev. B=0A= Board: Yosemite - AMCC PPC440EP Evaluation Board=0A= VCO: 1066 MHz=0A= CPU: 533 MHz=0A= PLB: 133 MHz=0A= OPB: 66 MHz=0A= EPB: 66 MHz=0A= PCI: 66 MHz=0A= I2C: ready=0A= DRAM: 256 MB=0A= FLASH: 64 MB=0A= PCI: Bus Dev VenId DevId Class Int=0A= 00 0c 1191 0009 0180 00=0A= In: serial=0A= Out: serial=0A= Err: serial=0A= Net: ppc_4xx_eth0, ppc_4xx_eth1=0A= =0A= Type "run flash_nfs" to mount root filesystem over NFS=0A= =0A= Hit any key to stop autoboot: 0=0A= =3D> tftp 400000 uImage=0A= ENET Speed is 100 Mbps - FULL duplex connection=0A= Using ppc_4xx_eth0 device=0A= TFTP from server 192.168.0.93; our IP address is 192.168.0.66=0A= Filename 'uImage'.=0A= Load address: 0x400000=0A= Loading: = #################################################################=0A= = #################################################################=0A= = #################################################################=0A= ###########################################=0A= done=0A= Bytes transferred =3D 1217393 (129371 hex)=0A= =3D> bootram=0A= Unknown command 'bootram' - try 'help'=0A= =3D> run bootram=0A= ## Booting image at 00400000 ...=0A= Image Name: Linux-2.6.14=0A= Image Type: PowerPC Linux Kernel Image (gzip compressed)=0A= Data Size: 1217329 Bytes =3D 1.2 MB=0A= Load Address: 00000000=0A= Entry Point: 00000000=0A= Verifying Checksum ... OK=0A= Uncompressing Kernel Image ... OK=0A= ## Loading RAMDisk Image at fed40000 ...=0A= Image Name: Yosemite Ramdisk=0A= Image Type: PowerPC Linux RAMDisk Image (gzip compressed)=0A= Data Size: 17770706 Bytes =3D 16.9 MB=0A= Load Address: 00000000=0A= Entry Point: 00000000=0A= Verifying Checksum ... OK=0A= Loading Ramdisk to 0ee47000, end 0ff398d2 ... OK=0A= Linux version 2.6.14 (root@dxp) (gcc version 4.0.0) #7 Sun Nov 13 = 21:59:01 CST 2005=0A= AMCC PowerPC 440EP Yosemite Platform=0A= Built 1 zonelists=0A= Kernel command line: ramdisk_size=3D49152 root=3D/dev/ram rw = ip=3D192.168.0.66:192.168.0.93::255.255.255.0:yosemite:eth0:off = panic=3D1 console=3DttyS0,115200=0A= PID hash table entries: 2048 (order: 11, 32768 bytes)=0A= Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)=0A= Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)=0A= Memory: 239616k available (1860k kernel code, 596k data, 140k init, 0k = highmem)=0A= Mount-cache hash table entries: 512=0A= checking if image is initramfs...it isn't (no cpio magic); looks like an = initrd=0A= softlockup thread 0 started up.=0A= Freeing initrd memory: 17354k freed=0A= NET: Registered protocol family 16=0A= PCI: Probing PCI hardware=0A= usbcore: registered new driver usbfs=0A= usbcore: registered new driver hub=0A= SCSI subsystem initialized=0A= io scheduler noop registered=0A= io scheduler anticipatory registered=0A= io scheduler deadline registered=0A= io scheduler cfq registered=0A= usbmon: debugfs is not available=0A= ppc-soc-ohci ppc-soc-ohci.0: USB Host Controller=0A= ppc-soc-ohci ppc-soc-ohci.0: new USB bus registered, assigned bus number = 1=0A= ppc-soc-ohci ppc-soc-ohci.0: irq 40, io mem 0xef601000=0A= usb usb1: Product: USB Host Controller=0A= usb usb1: Manufacturer: Linux 2.6.14 ohci_hcd=0A= usb usb1: SerialNumber: PPC-SOC USB=0A= hub 1-0:1.0: USB hub found=0A= hub 1-0:1.0: 2 ports detected=0A= Initializing USB Mass Storage driver...=0A= usbcore: registered new driver usb-storage=0A= USB Mass Storage support registered.=0A= pegasus: v0.6.12 (2005/01/13), Pegasus/Pegasus II USB Ethernet driver=0A= usbcore: registered new driver pegasus=0A= Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled=0A= serial8250: ttyS0 at MMIO 0x0 (irq =3D 0) is a 16550A=0A= serial8250: ttyS1 at MMIO 0x0 (irq =3D 1) is a 16550A=0A= RAMDISK driver initialized: 16 RAM disks of 49152K size 1024 blocksize=0A= PPC 4xx OCP EMAC driver, version 3.53=0A= mal0: initialized, 4 TX channels, 2 RX channels=0A= zmii0: bridge in RMII mode=0A= eth0: emac0, MAC 00:10:ec:00:87:40=0A= eth0: found Generic MII PHY (0x01)=0A= eth1: emac1, MAC 00:10:ec:00:87:47=0A= eth1: found Generic MII PHY (0x03)=0A= Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2=0A= ide: Assuming 33MHz system bus speed for PIO modes; override with = idebus=3Dxx=0A= Data machine check in kernel mode.=0A= PLB0: BEAR=3D0x0000000000000000 ACR=3D 0x00000000 BESR=3D 0xfffff7ff=0A= POB0: BEAR=3D0xc27e3194ffffffff BESR0=3D0x00000000 BESR1=3D0x00000000=0A= OPB0: BEAR=3D0x0000000000000151 BSTAT=3D0x00000000=0A= Oops: machine check, sig: 7 [#1]=0A= NIP: 00000000 LR: C0263628 SP: CFF41F40 REGS: c0271f50 TRAP: 0202 Not = tainted=0A= MSR: 00000000 EE: 0 PR: 0 FP: 0 ME: 0 IR/DR: 00=0A= TASK =3D c04f8b10[1] 'swapper' THREAD: cff40000=0A= Last syscall: 120=0A= GPR00: FDFFEF02 CFF41F40 C04F8B10 C04FC000 C026C6B4 C04FC000 00000009 = CFF41EF4=0A= GPR08: C04F9F70 00000000 00004000 C0270000 24254322 61000408 0FFB6800 = 00000001=0A= GPR16: 00800000 0FFCEAD4 FFFFFFFF 00000000 007FFF00 0FFB1210 00000003 = 00000002=0A= GPR24: C01D0000 C01D0000 C0270000 C01D0000 C0270000 C0223E10 C026C6B4 = C04FC000=0A= NIP [00000000] 0x0=0A= LR [c0263628] aec62xx_init_one+0x38/0x48=0A= Call trace:=0A= [c0263628] aec62xx_init_one+0x38/0x48=0A= [c02649b8] ide_scan_pcidev+0x68/0xb0=0A= [c0264a34] ide_scan_pcibus+0x34/0xe8=0A= [c026492c] ide_init+0x68/0x8c=0A= [c00013ac] init+0xb4/0x254=0A= [c00046c0] kernel_thread+0x48/0x64=0A= Data machine check in kernel mode.=0A= PLB0: BEAR=3D0x0000000000000000 ACR=3D 0x00000000 BESR=3D 0xfffff7ff=0A= POB0: BEAR=3D0xc27e3194ffffffff BESR0=3D0x00000000 BESR1=3D0x00000000=0A= OPB0: BEAR=3D0x0000000000000151 BSTAT=3D0x00000000=0A= Oops: machine check, sig: 7 [#2]=0A= NIP: 00000000 LR: C000235C SP: C0271E70 REGS: c0271f50 TRAP: 0202 Not = tainted=0A= MSR: 00000000 EE: 0 PR: 0 FP: 0 ME: 0 IR/DR: 00=0A= TASK =3D c04f8b10[1] 'swapper' THREAD: cff40000=0A= Last syscall: 120=0A= GPR00: 08000000 C0271E70 C04F8B10 C0271E80 00001568 FFFFFFFF C0270000 = 00004000=0A= GPR08: C0270000 C000235C 00021002 C00039E8 C04F8CD8 61000408 0FFB6800 = 00000001=0A= GPR16: 00800000 0FFCEAD4 FFFFFFFF 00000000 007FFF00 0FFB1210 00000003 = 00000002=0A= GPR24: C01D0000 C01D0000 C0270000 C01D0000 C0270000 C0223E10 00000007 = C0271F50=0A= NIP [00000000] 0x0=0A= LR [c000235c] ret_from_except+0x0/0x18=0A= Kernel panic - not syncing: Attempted to kill init!=0A= <0>Rebooting in 1 seconds..=0A= =0A= ------=_NextPart_000_0005_01C5EAEA.EC64E810--