From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail-out.m-online.net (mail-out.m-online.net [212.18.0.9]) by ozlabs.org (Postfix) with ESMTP id 791A868878 for ; Wed, 7 Dec 2005 23:19:37 +1100 (EST) To: batsayan.das@tcs.com From: Wolfgang Denk Mime-version: 1.0 Content-type: text/plain; charset=ISO-8859-1 In-reply-to: Your message of "Wed, 07 Dec 2005 15:20:25 +0530." Date: Wed, 07 Dec 2005 13:19:34 +0100 Sender: wd@denx.de Message-Id: <20051207121934.B4959353A67@atlas.denx.de> Cc: linuxppc-embedded@ozlabs.org Subject: Re: Help required on mpc8260 kernel boot List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , In message you wrote: > > I am using customs board with MPC8260 processor. I have RAM version of > U-Boot and I am able to get U-Boot prompt when I load and run u-bbot.srec > by TRACE32. My memory map is as follows > > SDRAM start address :0x30000000 and 128MB > Flash start address: 0x00000000 and 1MB One of your fellows (mail address pritha.bhattacharya@tcs.com) posted this before, and received pretty clear hints that your configuration is not correct. Also, you continue to ignore answers from the FAQs. Please read the answers you received before, and follow the advice given. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de panic: can't find /