* Porting Linux2.6.13 on MPC860T custom build board
@ 2005-12-28 11:58 venkatajagadeesh p
2005-12-28 13:22 ` Vitaly Bordug
0 siblings, 1 reply; 6+ messages in thread
From: venkatajagadeesh p @ 2005-12-28 11:58 UTC (permalink / raw)
To: linuxppc-embedded
[-- Attachment #1.1: Type: text/plain, Size: 821 bytes --]
Hi,
We are trying to port Linux-2.6.13 on Custom build MPC860T, board, We are unable to see any messages on console. We got the output given below. Please help us in porting the kernel.
I am attaching the config file .
=>bootm 0x100000
## Booting image at 00100000 ...
Image Name: Linux-2.6.13
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 958189 Bytes = 935.7 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... gunzip function called
OK
do_bootm_linux called ...do_bootm_linux after ...part2 do_boot_linux before RAM
Disk image loading ...
No initrd
## Transferring control to Linux (at address 00000000) ...
---------------------------------
Yahoo! for Good - Make a difference this year.
[-- Attachment #1.2: Type: text/html, Size: 1248 bytes --]
[-- Attachment #2: 172188218-.config --]
[-- Type: text/plain, Size: 11858 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.13
# Wed Dec 28 16:20:34 2005
#
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_PPC=y
CONFIG_PPC32=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
# CONFIG_MODULES is not set
#
# Processor
#
# CONFIG_6xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_POWER3 is not set
# CONFIG_POWER4 is not set
CONFIG_8xx=y
# CONFIG_E200 is not set
# CONFIG_E500 is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_KEXEC is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_WANT_EARLY_SERIAL is not set
CONFIG_EMBEDDEDBOOT=y
CONFIG_NOT_COHERENT_CACHE=y
#
# Platform options
#
CONFIG_FADS=y
# CONFIG_RPXLITE is not set
# CONFIG_RPXCLASSIC is not set
# CONFIG_BSEIP is not set
CONFIG_MPC8XXFADS=y
# CONFIG_MPC86XADS is not set
# CONFIG_MPC885ADS is not set
# CONFIG_TQM823L is not set
# CONFIG_TQM850L is not set
# CONFIG_TQM855L is not set
# CONFIG_TQM860L is not set
# CONFIG_FPS850L is not set
# CONFIG_SPD823TS is not set
# CONFIG_IVMS8 is not set
# CONFIG_IVML24 is not set
# CONFIG_SM850 is not set
# CONFIG_HERMES_PRO is not set
# CONFIG_IP860 is not set
# CONFIG_LWMON is not set
# CONFIG_PCU_E is not set
# CONFIG_CCM is not set
# CONFIG_LANTEC is not set
# CONFIG_MBX is not set
# CONFIG_WINCEPT is not set
# CONFIG_HIGHMEM is not set
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
# Bus options
#
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_QSPAN is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_BOOT_LOAD=0x00400000
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_ARPD=y
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
CONFIG_IP_TCPDIAG_IPV6=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
CONFIG_BRIDGE=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_SCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# I2O device support
#
#
# Macintosh device drivers
#
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
#
# Ethernet (1000 Mbit)
#
#
# Ethernet (10000 Mbit)
#
#
# Token Ring devices
#
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
CONFIG_SERIAL_CPM_SCC1=y
CONFIG_SERIAL_CPM_SCC2=y
# CONFIG_SERIAL_CPM_SCC3 is not set
CONFIG_SERIAL_CPM_SCC4=y
CONFIG_SERIAL_CPM_SMC1=y
CONFIG_SERIAL_CPM_SMC2=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
#
# I2C support
#
# CONFIG_I2C is not set
# CONFIG_I2C_SENSOR is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
#
# Misc devices
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
#
# SN Devices
#
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_SYSFS=y
# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
# CONFIG_NLS is not set
#
# MPC8xx CPM Options
#
# CONFIG_SCC_ENET is not set
CONFIG_FEC_ENET=y
CONFIG_USE_MDIO=y
CONFIG_FEC_AM79C874=y
# CONFIG_FEC_LXT970 is not set
# CONFIG_FEC_LXT971 is not set
# CONFIG_FEC_QS6612 is not set
CONFIG_ENET_BIG_BUFFERS=y
#
# Generic MPC8xx Options
#
# CONFIG_8xx_COPYBACK is not set
# CONFIG_8xx_CPU6 is not set
CONFIG_NO_UCODE_PATCH=y
# CONFIG_USB_SOF_UCODE_PATCH is not set
# CONFIG_I2C_SPI_UCODE_PATCH is not set
# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: Porting Linux2.6.13 on MPC860T custom build board
2005-12-28 11:58 Porting Linux2.6.13 on MPC860T custom build board venkatajagadeesh p
@ 2005-12-28 13:22 ` Vitaly Bordug
0 siblings, 0 replies; 6+ messages in thread
From: Vitaly Bordug @ 2005-12-28 13:22 UTC (permalink / raw)
To: venkatajagadeesh p; +Cc: linuxppc-embedded
venkatajagadeesh p wrote:
>
> Hi,
> We are trying to port Linux-2.6.13 on Custom build MPC860T, board,
> We are unable to see any messages on console. We got the output given
> below. Please help us in porting the kernel.
> I am attaching the config file .
>
> =>bootm 0x100000
> ## Booting image at 00100000 ...
> Image Name: Linux-2.6.13
> Image Type: PowerPC Linux Kernel Image (gzip compressed)
> Data Size: 958189 Bytes = 935.7 kB
> Load Address: 00000000
> Entry Point: 00000000
> Verifying Checksum ... OK
> Uncompressing Kernel Image ... gunzip function called
> OK
> do_bootm_linux called ...do_bootm_linux after ...part2 do_boot_linux
> before RAM
> Disk image loading ...
> No initrd
> ## Transferring control to Linux (at address 00000000) ...
>
Most probably, something odd with serial setup.
You have enabled just all the stuff (SCC/SMC), but (on 8xx at least)
they can hardly live together, having alternative - conflicting IO pin configurations.
> ------------------------------------------------------------------------
> Yahoo! for Good - Make a difference this year.
> <http://us.rd.yahoo.com/mail_us/taglines/charity/*http://brand.yahoo.com/cybergivingweek2005/>
>
>
>
> ------------------------------------------------------------------------
>
> #
> # Automatically generated make config: don't edit
> # Linux kernel version: 2.6.13
> # Wed Dec 28 16:20:34 2005
> #
> CONFIG_MMU=y
> CONFIG_GENERIC_HARDIRQS=y
> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> CONFIG_GENERIC_CALIBRATE_DELAY=y
> CONFIG_HAVE_DEC_LOCK=y
> CONFIG_PPC=y
> CONFIG_PPC32=y
> CONFIG_GENERIC_NVRAM=y
> CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
>
> #
> # Code maturity level options
> #
> CONFIG_EXPERIMENTAL=y
> CONFIG_CLEAN_COMPILE=y
> CONFIG_BROKEN_ON_SMP=y
> CONFIG_INIT_ENV_ARG_LIMIT=32
>
> #
> # General setup
> #
> CONFIG_LOCALVERSION=""
> # CONFIG_SWAP is not set
> CONFIG_SYSVIPC=y
> # CONFIG_POSIX_MQUEUE is not set
> # CONFIG_BSD_PROCESS_ACCT is not set
> CONFIG_SYSCTL=y
> # CONFIG_AUDIT is not set
> # CONFIG_HOTPLUG is not set
> CONFIG_KOBJECT_UEVENT=y
> # CONFIG_IKCONFIG is not set
> # CONFIG_EMBEDDED is not set
> CONFIG_KALLSYMS=y
> # CONFIG_KALLSYMS_EXTRA_PASS is not set
> CONFIG_PRINTK=y
> CONFIG_BUG=y
> CONFIG_BASE_FULL=y
> CONFIG_FUTEX=y
> CONFIG_EPOLL=y
> CONFIG_SHMEM=y
> CONFIG_CC_ALIGN_FUNCTIONS=0
> CONFIG_CC_ALIGN_LABELS=0
> CONFIG_CC_ALIGN_LOOPS=0
> CONFIG_CC_ALIGN_JUMPS=0
> # CONFIG_TINY_SHMEM is not set
> CONFIG_BASE_SMALL=0
>
> #
> # Loadable module support
> #
> # CONFIG_MODULES is not set
>
> #
> # Processor
> #
> # CONFIG_6xx is not set
> # CONFIG_40x is not set
> # CONFIG_44x is not set
> # CONFIG_POWER3 is not set
> # CONFIG_POWER4 is not set
> CONFIG_8xx=y
> # CONFIG_E200 is not set
> # CONFIG_E500 is not set
> # CONFIG_MATH_EMULATION is not set
> # CONFIG_KEXEC is not set
> # CONFIG_CPU_FREQ is not set
> # CONFIG_WANT_EARLY_SERIAL is not set
> CONFIG_EMBEDDEDBOOT=y
> CONFIG_NOT_COHERENT_CACHE=y
>
> #
> # Platform options
> #
> CONFIG_FADS=y
> # CONFIG_RPXLITE is not set
> # CONFIG_RPXCLASSIC is not set
> # CONFIG_BSEIP is not set
> CONFIG_MPC8XXFADS=y
> # CONFIG_MPC86XADS is not set
> # CONFIG_MPC885ADS is not set
> # CONFIG_TQM823L is not set
> # CONFIG_TQM850L is not set
> # CONFIG_TQM855L is not set
> # CONFIG_TQM860L is not set
> # CONFIG_FPS850L is not set
> # CONFIG_SPD823TS is not set
> # CONFIG_IVMS8 is not set
> # CONFIG_IVML24 is not set
> # CONFIG_SM850 is not set
> # CONFIG_HERMES_PRO is not set
> # CONFIG_IP860 is not set
> # CONFIG_LWMON is not set
> # CONFIG_PCU_E is not set
> # CONFIG_CCM is not set
> # CONFIG_LANTEC is not set
> # CONFIG_MBX is not set
> # CONFIG_WINCEPT is not set
> # CONFIG_HIGHMEM is not set
> CONFIG_HZ_100=y
> # CONFIG_HZ_250 is not set
> # CONFIG_HZ_1000 is not set
> CONFIG_HZ=100
> CONFIG_PREEMPT_NONE=y
> # CONFIG_PREEMPT_VOLUNTARY is not set
> # CONFIG_PREEMPT is not set
> CONFIG_SELECT_MEMORY_MODEL=y
> CONFIG_FLATMEM_MANUAL=y
> # CONFIG_DISCONTIGMEM_MANUAL is not set
> # CONFIG_SPARSEMEM_MANUAL is not set
> CONFIG_FLATMEM=y
> CONFIG_FLAT_NODE_MEM_MAP=y
> CONFIG_BINFMT_ELF=y
> # CONFIG_BINFMT_MISC is not set
> # CONFIG_CMDLINE_BOOL is not set
> # CONFIG_PM is not set
> CONFIG_SECCOMP=y
> CONFIG_ISA_DMA_API=y
>
> #
> # Bus options
> #
> # CONFIG_PCI is not set
> # CONFIG_PCI_DOMAINS is not set
> # CONFIG_PCI_QSPAN is not set
>
> #
> # PCCARD (PCMCIA/CardBus) support
> #
> # CONFIG_PCCARD is not set
>
> #
> # Advanced setup
> #
> # CONFIG_ADVANCED_OPTIONS is not set
>
> #
> # Default settings for advanced configuration options are used
> #
> CONFIG_HIGHMEM_START=0xfe000000
> CONFIG_LOWMEM_SIZE=0x30000000
> CONFIG_KERNEL_START=0xc0000000
> CONFIG_TASK_SIZE=0x80000000
> CONFIG_CONSISTENT_START=0xff100000
> CONFIG_CONSISTENT_SIZE=0x00200000
> CONFIG_BOOT_LOAD=0x00400000
>
> #
> # Networking
> #
> CONFIG_NET=y
>
> #
> # Networking options
> #
> CONFIG_PACKET=y
> CONFIG_PACKET_MMAP=y
> CONFIG_UNIX=y
> # CONFIG_NET_KEY is not set
> CONFIG_INET=y
> # CONFIG_IP_MULTICAST is not set
> # CONFIG_IP_ADVANCED_ROUTER is not set
> CONFIG_IP_FIB_HASH=y
> CONFIG_IP_PNP=y
> CONFIG_IP_PNP_DHCP=y
> CONFIG_IP_PNP_BOOTP=y
> CONFIG_IP_PNP_RARP=y
> # CONFIG_NET_IPIP is not set
> # CONFIG_NET_IPGRE is not set
> CONFIG_ARPD=y
> # CONFIG_SYN_COOKIES is not set
> # CONFIG_INET_AH is not set
> # CONFIG_INET_ESP is not set
> # CONFIG_INET_IPCOMP is not set
> # CONFIG_INET_TUNNEL is not set
> CONFIG_IP_TCPDIAG=y
> CONFIG_IP_TCPDIAG_IPV6=y
> # CONFIG_TCP_CONG_ADVANCED is not set
> CONFIG_TCP_CONG_BIC=y
> CONFIG_IPV6=y
> # CONFIG_IPV6_PRIVACY is not set
> # CONFIG_INET6_AH is not set
> # CONFIG_INET6_ESP is not set
> # CONFIG_INET6_IPCOMP is not set
> # CONFIG_INET6_TUNNEL is not set
> # CONFIG_IPV6_TUNNEL is not set
> # CONFIG_NETFILTER is not set
>
> #
> # SCTP Configuration (EXPERIMENTAL)
> #
> # CONFIG_IP_SCTP is not set
> # CONFIG_ATM is not set
> CONFIG_BRIDGE=y
> # CONFIG_VLAN_8021Q is not set
> # CONFIG_DECNET is not set
> # CONFIG_LLC2 is not set
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_NET_DIVERT is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
> # CONFIG_NET_SCHED is not set
> # CONFIG_NET_CLS_ROUTE is not set
>
> #
> # Network testing
> #
> # CONFIG_NET_PKTGEN is not set
> # CONFIG_HAMRADIO is not set
> # CONFIG_IRDA is not set
> # CONFIG_BT is not set
>
> #
> # Device Drivers
> #
>
> #
> # Generic Driver Options
> #
> CONFIG_STANDALONE=y
> CONFIG_PREVENT_FIRMWARE_BUILD=y
> # CONFIG_FW_LOADER is not set
>
> #
> # Memory Technology Devices (MTD)
> #
> # CONFIG_MTD is not set
>
> #
> # Parallel port support
> #
> # CONFIG_PARPORT is not set
>
> #
> # Plug and Play support
> #
>
> #
> # Block devices
> #
> # CONFIG_BLK_DEV_FD is not set
> # CONFIG_BLK_DEV_COW_COMMON is not set
> # CONFIG_BLK_DEV_LOOP is not set
> # CONFIG_BLK_DEV_NBD is not set
> CONFIG_BLK_DEV_RAM=y
> CONFIG_BLK_DEV_RAM_COUNT=16
> CONFIG_BLK_DEV_RAM_SIZE=4096
> CONFIG_BLK_DEV_INITRD=y
> CONFIG_INITRAMFS_SOURCE=""
> # CONFIG_LBD is not set
> # CONFIG_CDROM_PKTCDVD is not set
>
> #
> # IO Schedulers
> #
> CONFIG_IOSCHED_NOOP=y
> # CONFIG_IOSCHED_AS is not set
> # CONFIG_IOSCHED_DEADLINE is not set
> # CONFIG_IOSCHED_CFQ is not set
> # CONFIG_ATA_OVER_ETH is not set
>
> #
> # ATA/ATAPI/MFM/RLL support
> #
> # CONFIG_IDE is not set
>
> #
> # SCSI device support
> #
> # CONFIG_SCSI is not set
>
> #
> # Multi-device support (RAID and LVM)
> #
> # CONFIG_MD is not set
>
> #
> # Fusion MPT device support
> #
> # CONFIG_FUSION is not set
>
> #
> # IEEE 1394 (FireWire) support
> #
>
> #
> # I2O device support
> #
>
> #
> # Macintosh device drivers
> #
>
> #
> # Network device support
> #
> CONFIG_NETDEVICES=y
> # CONFIG_DUMMY is not set
> # CONFIG_BONDING is not set
> # CONFIG_EQUALIZER is not set
> # CONFIG_TUN is not set
>
> #
> # Ethernet (10 or 100Mbit)
> #
> CONFIG_NET_ETHERNET=y
> CONFIG_MII=y
>
> #
> # Ethernet (1000 Mbit)
> #
>
> #
> # Ethernet (10000 Mbit)
> #
>
> #
> # Token Ring devices
> #
>
> #
> # Wireless LAN (non-hamradio)
> #
> # CONFIG_NET_RADIO is not set
>
> #
> # Wan interfaces
> #
> # CONFIG_WAN is not set
> # CONFIG_PPP is not set
> # CONFIG_SLIP is not set
> # CONFIG_SHAPER is not set
> # CONFIG_NETCONSOLE is not set
> # CONFIG_NETPOLL is not set
> # CONFIG_NET_POLL_CONTROLLER is not set
>
> #
> # ISDN subsystem
> #
> # CONFIG_ISDN is not set
>
> #
> # Telephony Support
> #
> # CONFIG_PHONE is not set
>
> #
> # Input device support
> #
> CONFIG_INPUT=y
>
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_INPUT_MOUSEDEV_PSAUX=y
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> # CONFIG_INPUT_JOYDEV is not set
> # CONFIG_INPUT_TSDEV is not set
> # CONFIG_INPUT_EVDEV is not set
> # CONFIG_INPUT_EVBUG is not set
>
> #
> # Input Device Drivers
> #
> # CONFIG_INPUT_KEYBOARD is not set
> # CONFIG_INPUT_MOUSE is not set
> # CONFIG_INPUT_JOYSTICK is not set
> # CONFIG_INPUT_TOUCHSCREEN is not set
> # CONFIG_INPUT_MISC is not set
>
> #
> # Hardware I/O ports
> #
> # CONFIG_SERIO is not set
> # CONFIG_GAMEPORT is not set
>
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> CONFIG_SERIAL_NONSTANDARD=y
> # CONFIG_COMPUTONE is not set
> # CONFIG_ROCKETPORT is not set
> # CONFIG_CYCLADES is not set
> # CONFIG_DIGIEPCA is not set
> # CONFIG_MOXA_INTELLIO is not set
> # CONFIG_MOXA_SMARTIO is not set
> # CONFIG_ISI is not set
> # CONFIG_SYNCLINKMP is not set
> # CONFIG_N_HDLC is not set
> # CONFIG_RISCOM8 is not set
> # CONFIG_SPECIALIX is not set
> # CONFIG_SX is not set
> # CONFIG_RIO is not set
> # CONFIG_STALDRV is not set
>
> #
> # Serial drivers
> #
> # CONFIG_SERIAL_8250 is not set
>
> #
> # Non-8250 serial port support
> #
> CONFIG_SERIAL_CORE=y
> CONFIG_SERIAL_CORE_CONSOLE=y
> CONFIG_SERIAL_CPM=y
> CONFIG_SERIAL_CPM_CONSOLE=y
> CONFIG_SERIAL_CPM_SCC1=y
> CONFIG_SERIAL_CPM_SCC2=y
> # CONFIG_SERIAL_CPM_SCC3 is not set
> CONFIG_SERIAL_CPM_SCC4=y
> CONFIG_SERIAL_CPM_SMC1=y
> CONFIG_SERIAL_CPM_SMC2=y
> CONFIG_UNIX98_PTYS=y
> # CONFIG_LEGACY_PTYS is not set
>
> #
> # IPMI
> #
> # CONFIG_IPMI_HANDLER is not set
>
> #
> # Watchdog Cards
> #
> # CONFIG_WATCHDOG is not set
> # CONFIG_NVRAM is not set
> # CONFIG_GEN_RTC is not set
> # CONFIG_DTLK is not set
> # CONFIG_R3964 is not set
>
> #
> # Ftape, the floppy tape device driver
> #
> # CONFIG_AGP is not set
> # CONFIG_RAW_DRIVER is not set
>
> #
> # TPM devices
> #
>
> #
> # I2C support
> #
> # CONFIG_I2C is not set
> # CONFIG_I2C_SENSOR is not set
>
> #
> # Dallas's 1-wire bus
> #
> # CONFIG_W1 is not set
>
> #
> # Hardware Monitoring support
> #
> # CONFIG_HWMON is not set
>
> #
> # Misc devices
> #
>
> #
> # Multimedia devices
> #
> # CONFIG_VIDEO_DEV is not set
>
> #
> # Digital Video Broadcasting Devices
> #
> # CONFIG_DVB is not set
>
> #
> # Graphics support
> #
> # CONFIG_FB is not set
>
> #
> # Console display driver support
> #
> CONFIG_DUMMY_CONSOLE=y
>
> #
> # Sound
> #
> # CONFIG_SOUND is not set
>
> #
> # USB support
> #
> # CONFIG_USB_ARCH_HAS_HCD is not set
> # CONFIG_USB_ARCH_HAS_OHCI is not set
>
> #
> # USB Gadget Support
> #
> # CONFIG_USB_GADGET is not set
>
> #
> # MMC/SD Card support
> #
> # CONFIG_MMC is not set
>
> #
> # InfiniBand support
> #
>
> #
> # SN Devices
> #
>
> #
> # File systems
> #
> CONFIG_EXT2_FS=y
> CONFIG_EXT2_FS_XATTR=y
> CONFIG_EXT2_FS_POSIX_ACL=y
> CONFIG_EXT2_FS_SECURITY=y
> CONFIG_EXT2_FS_XIP=y
> CONFIG_FS_XIP=y
> # CONFIG_EXT3_FS is not set
> # CONFIG_JBD is not set
> CONFIG_FS_MBCACHE=y
> # CONFIG_REISERFS_FS is not set
> # CONFIG_JFS_FS is not set
> CONFIG_FS_POSIX_ACL=y
>
> #
> # XFS support
> #
> # CONFIG_XFS_FS is not set
> # CONFIG_MINIX_FS is not set
> CONFIG_ROMFS_FS=y
> CONFIG_INOTIFY=y
> # CONFIG_QUOTA is not set
> CONFIG_DNOTIFY=y
> # CONFIG_AUTOFS_FS is not set
> # CONFIG_AUTOFS4_FS is not set
>
> #
> # CD-ROM/DVD Filesystems
> #
> # CONFIG_ISO9660_FS is not set
> # CONFIG_UDF_FS is not set
>
> #
> # DOS/FAT/NT Filesystems
> #
> # CONFIG_MSDOS_FS is not set
> # CONFIG_VFAT_FS is not set
> # CONFIG_NTFS_FS is not set
>
> #
> # Pseudo filesystems
> #
> CONFIG_PROC_FS=y
> # CONFIG_PROC_KCORE is not set
> CONFIG_SYSFS=y
> # CONFIG_DEVPTS_FS_XATTR is not set
> # CONFIG_TMPFS is not set
> # CONFIG_HUGETLB_PAGE is not set
> CONFIG_RAMFS=y
>
> #
> # Miscellaneous filesystems
> #
> # CONFIG_ADFS_FS is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_HFSPLUS_FS is not set
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EFS_FS is not set
> # CONFIG_CRAMFS is not set
> # CONFIG_VXFS_FS is not set
> # CONFIG_HPFS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_SYSV_FS is not set
> # CONFIG_UFS_FS is not set
>
> #
> # Network File Systems
> #
> CONFIG_NFS_FS=y
> # CONFIG_NFS_V3 is not set
> # CONFIG_NFS_V4 is not set
> # CONFIG_NFS_DIRECTIO is not set
> # CONFIG_NFSD is not set
> CONFIG_ROOT_NFS=y
> CONFIG_LOCKD=y
> CONFIG_NFS_COMMON=y
> CONFIG_SUNRPC=y
> # CONFIG_RPCSEC_GSS_KRB5 is not set
> # CONFIG_RPCSEC_GSS_SPKM3 is not set
> # CONFIG_SMB_FS is not set
> # CONFIG_CIFS is not set
> # CONFIG_NCP_FS is not set
> # CONFIG_CODA_FS is not set
> # CONFIG_AFS_FS is not set
>
> #
> # Partition Types
> #
> # CONFIG_PARTITION_ADVANCED is not set
> CONFIG_MSDOS_PARTITION=y
>
> #
> # Native Language Support
> #
> # CONFIG_NLS is not set
>
> #
> # MPC8xx CPM Options
> #
> # CONFIG_SCC_ENET is not set
> CONFIG_FEC_ENET=y
> CONFIG_USE_MDIO=y
> CONFIG_FEC_AM79C874=y
> # CONFIG_FEC_LXT970 is not set
> # CONFIG_FEC_LXT971 is not set
> # CONFIG_FEC_QS6612 is not set
> CONFIG_ENET_BIG_BUFFERS=y
>
> #
> # Generic MPC8xx Options
> #
> # CONFIG_8xx_COPYBACK is not set
> # CONFIG_8xx_CPU6 is not set
> CONFIG_NO_UCODE_PATCH=y
> # CONFIG_USB_SOF_UCODE_PATCH is not set
> # CONFIG_I2C_SPI_UCODE_PATCH is not set
> # CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
>
> #
> # Library routines
> #
> # CONFIG_CRC_CCITT is not set
> # CONFIG_CRC32 is not set
> # CONFIG_LIBCRC32C is not set
>
> #
> # Profiling support
> #
> # CONFIG_PROFILING is not set
>
> #
> # Kernel hacking
> #
> # CONFIG_PRINTK_TIME is not set
> # CONFIG_DEBUG_KERNEL is not set
> CONFIG_LOG_BUF_SHIFT=14
>
> #
> # Security options
> #
> # CONFIG_KEYS is not set
> # CONFIG_SECURITY is not set
>
> #
> # Cryptographic options
> #
> # CONFIG_CRYPTO is not set
>
> #
> # Hardware crypto devices
> #
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
--
Sincerely,
Vitaly
^ permalink raw reply [flat|nested] 6+ messages in thread
* re: Porting Linux2.6.13 on MPC860T custom build board
@ 2005-12-29 5:28 venkatajagadeesh p
0 siblings, 0 replies; 6+ messages in thread
From: venkatajagadeesh p @ 2005-12-29 5:28 UTC (permalink / raw)
To: linuxppc-embedded
[-- Attachment #1.1: Type: text/plain, Size: 2144 bytes --]
venkatajagadeesh p wrote:
>
> Hi,
> We are trying to port Linux-2.6.13 on Custom build MPC860T, board,
> We are unable to see any messages on console. We got the output given
> below. Please help us in porting the kernel.
> I am attaching the config file .
>
> =>bootm 0x100000
> ## Booting image at 00100000 ...
> Image Name: Linux-2.6.13
> Image Type: PowerPC Linux Kernel Image (gzip compressed)
> Data Size: 958189 Bytes = 935.7 kB
> Load Address: 00000000
> Entry Point: 00000000
> Verifying Checksum ... OK
> Uncompressing Kernel Image ... gunzip function called
> OK
> do_bootm_linux called ...do_bootm_linux after ...part2 do_boot_linux
> before RAM
> Disk image loading ...
> No initrd
> ## Transferring control to Linux (at address 00000000) ...
>
> >Most probably, something odd with serial setup.
> >You have enabled just all the stuff (SCC/SMC), but (on 8xx at least)
>>they can hardly live together, having alternative - conflicting IO pin configurations.
We enabling only SMC2, still it is showing the same problem. In U-boot loader we have modified the default console to SMC2. We have not done any modifications to the original linux-2.6.13 code.
I am sending config file as an attachment.
I am sending U-boot env varibles also
=>printenv
bootcmd=bootm;setenv bootargs root=/dev/ram rw
bootdelay=5
baudrate=57600
loads_echo=1
ethaddr=9a:52:63:15:85:25
bootfile=uImage
filesize=95f0a
ipaddr=192.168.3.2
serverip=192.168.3.6
netdev=eth0
netmask=255.255.255.0
addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmas
k}:${hostname}:${netdev}:off
ramargs=setenv bootargs root=/dev/ram rw
kernel_addr=0xfc0a0000
ramdisk_addr=0xfc160000
flash_ram=run ramargs addip;bootm 0xfc0a0000 0xfc160000
net_ram=tftpboot 0x100000 uImage;tftpboot 0x400000 rambb2;run ramargs addip;boot
m 0x100000 0x400000
stdin=serial
stdout=serial
stderr=serial
bootargs=root=/dev/ram rw
Environment size: 638/262140 bytes
---------------------------------
Yahoo! Photos
Ring in the New Year with Photo Calendars. Add photos, events, holidays, whatever.
[-- Attachment #1.2: Type: text/html, Size: 3026 bytes --]
[-- Attachment #2: 172188218-.config --]
[-- Type: text/plain, Size: 11955 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.13
# Thu Dec 29 10:54:14 2005
#
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_PPC=y
CONFIG_PPC32=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
# CONFIG_MODULES is not set
#
# Processor
#
# CONFIG_6xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_POWER3 is not set
# CONFIG_POWER4 is not set
CONFIG_8xx=y
# CONFIG_E200 is not set
# CONFIG_E500 is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_KEXEC is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_WANT_EARLY_SERIAL is not set
CONFIG_EMBEDDEDBOOT=y
CONFIG_NOT_COHERENT_CACHE=y
#
# Platform options
#
CONFIG_FADS=y
# CONFIG_RPXLITE is not set
# CONFIG_RPXCLASSIC is not set
# CONFIG_BSEIP is not set
CONFIG_MPC8XXFADS=y
# CONFIG_MPC86XADS is not set
# CONFIG_MPC885ADS is not set
# CONFIG_TQM823L is not set
# CONFIG_TQM850L is not set
# CONFIG_TQM855L is not set
# CONFIG_TQM860L is not set
# CONFIG_FPS850L is not set
# CONFIG_SPD823TS is not set
# CONFIG_IVMS8 is not set
# CONFIG_IVML24 is not set
# CONFIG_SM850 is not set
# CONFIG_HERMES_PRO is not set
# CONFIG_IP860 is not set
# CONFIG_LWMON is not set
# CONFIG_PCU_E is not set
# CONFIG_CCM is not set
# CONFIG_LANTEC is not set
# CONFIG_MBX is not set
# CONFIG_WINCEPT is not set
# CONFIG_HIGHMEM is not set
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS1,57600 console=tty1 root=/dev/ram"
# CONFIG_PM is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
# Bus options
#
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_QSPAN is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_BOOT_LOAD=0x00400000
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_ARPD=y
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
CONFIG_IP_TCPDIAG_IPV6=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
CONFIG_BRIDGE=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_SCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# I2O device support
#
#
# Macintosh device drivers
#
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
#
# Ethernet (1000 Mbit)
#
#
# Ethernet (10000 Mbit)
#
#
# Token Ring devices
#
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_CPM_SCC1 is not set
# CONFIG_SERIAL_CPM_SCC2 is not set
# CONFIG_SERIAL_CPM_SCC3 is not set
# CONFIG_SERIAL_CPM_SCC4 is not set
# CONFIG_SERIAL_CPM_SMC1 is not set
CONFIG_SERIAL_CPM_SMC2=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
#
# I2C support
#
# CONFIG_I2C is not set
# CONFIG_I2C_SENSOR is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
#
# Misc devices
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
#
# SN Devices
#
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_SYSFS=y
# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
# CONFIG_NLS is not set
#
# MPC8xx CPM Options
#
# CONFIG_SCC_ENET is not set
CONFIG_FEC_ENET=y
CONFIG_USE_MDIO=y
CONFIG_FEC_AM79C874=y
# CONFIG_FEC_LXT970 is not set
# CONFIG_FEC_LXT971 is not set
# CONFIG_FEC_QS6612 is not set
CONFIG_ENET_BIG_BUFFERS=y
#
# Generic MPC8xx Options
#
# CONFIG_8xx_COPYBACK is not set
# CONFIG_8xx_CPU6 is not set
CONFIG_NO_UCODE_PATCH=y
# CONFIG_USB_SOF_UCODE_PATCH is not set
# CONFIG_I2C_SPI_UCODE_PATCH is not set
# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
^ permalink raw reply [flat|nested] 6+ messages in thread[parent not found: <43B3958E.4010002@writeme.com>]
* Re: Porting Linux2.6.13 on MPC860T custom build board
@ 2005-12-30 4:44 venkatajagadeesh p
0 siblings, 0 replies; 6+ messages in thread
From: venkatajagadeesh p @ 2005-12-30 4:44 UTC (permalink / raw)
To: linuxppc-embedded, Sinan Akman
[-- Attachment #1: Type: text/plain, Size: 17250 bytes --]
We are seinding the details of porting Linux on MPC860T.
Initially we have enabled all the SMC/SCC devices these are conflicting with the console, the boot loader argument was wrong( connsole=ttyS1,57600 console=tty1 root=/dev/ram),and we have enabled CONFIG_VT.
Modifications :
We have selected only SMC2, and changed the boot loader argument to connsole=ttyCPM2,57600 root=/dev/ram , and modified the drivers/char/Kconfig file
( original lines )
config VT
bool "Virtual terminal" if EMBEDDED
select INPUT
default y if !VIOCONS
( Modified lines )
config VT
bool "Virtual terminal" if EMBEDDED
select INPUT
default n
These are the only modifications we have done to the config and Kconfig files.
Thanks
Venakta jagadeesh.p
> Hi Sinan Akman
>
> Thanks for Your suggestion, Now linux is up and
> booting. thanks for the community who contributed in this >porting.
> I am glad it worked. I guess my reply to you didn't go >through
>to
>linuxppc-embedded.
>You might want to post the sequence of things you tried, what >worked
>and
>what didn't. This
>way someone else can find it through search, assuming it >wasn't in the
>FAQ already.
> Regards
> Sinan Akman
>
> Thanks and one and all,
> Venkata jagadish.p
>
Sinan Akman <sinan@writeme.com> wrote:
Date: Thu, 29 Dec 2005 02:51:42 -0500
From: Sinan Akman <sinan@writeme.com>
To: venkatajagadeesh p <cpvjagadeesh@yahoo.com>
Subject: Re: Porting Linux2.6.13 on MPC860T custom build board
venkatajagadeesh p wrote:
> venkatajagadeesh p wrote:
> >/
> />/ Hi,
> />/ We are trying to port Linux-2.6.13 on Custom build MPC860T,
> board,
> />/ We are unable to see any messages on console. We got the output given
> />/ below. Please help us in porting the kernel.
> />/ I am attaching the config file .
> />/
> />/ =>bootm 0x100000
> />/ ## Booting image at 00100000 ...
> />/ Image Name: Linux-2.6.13
> />/ Image Type: PowerPC Linux Kernel Image (gzip compressed)
> />/ Data Size: 958189 Bytes = 935.7 kB
> />/ Load Address: 00000000
> />/ Entry Point: 00000000
> />/ Verifying Checksum ... OK
> />/ Uncompressing Kernel Image ... gunzip function called
> />/ OK
> />/ do_bootm_linux called ...do_bootm_linux after ...part2 do_boot_linux
> />/ before RAM
> />/ Disk image loading ...
> />/ No initrd
> />/ ## Transferring control to Linux (at address 00000000) ...
> />/
> /> >Most probably, something odd with serial setup.
> > >You have enabled just all the stuff (SCC/SMC), but (on 8xx at least)
> >>they can hardly live together, having alternative - conflicting IO
> pin configurations.
>
> We enabling only SMC2, still it is showing the same problem. In U-boot
> loader we have modified the default console to SMC2. We have not done
> any modifications to the original linux-2.6.13 code.
>
> I am sending config file as an attachment.
Try unsetting VT_CONSOLE. That is, uncheck "Support for console on
virtual terminal" in
Character Devices. It looks like your console output is directed to a
VT. You might also
want to specify console=ttyCPM2 in your bootloader argument.
Hope this helps
-- sinan
>
> I am sending U-boot env varibles also
>
> =>printenv
> bootcmd=bootm;setenv bootargs root=/dev/ram rw
> bootdelay=5
> baudrate=57600
> loads_echo=1
> ethaddr=9a:52:63:15:85:25
> bootfile=uImage
> filesize=95f0a
> ipaddr=192.168.3.2
> serverip=192.168.3.6
> netdev=eth0
> netmask=255.255.255.0
> addip=setenv bootargs ${bootargs}
> ip=${ipaddr}:${serverip}:${gatewayip}:${netmas
> k}:${hostname}:${netdev}:off
> ramargs=setenv bootargs root=/dev/ram rw
> kernel_addr=0xfc0a0000
> ramdisk_addr=0xfc160000
> flash_ram=run ramargs addip;bootm 0xfc0a0000 0xfc160000
> net_ram=tftpboot 0x100000 uImage;tftpboot 0x400000 rambb2;run ramargs
> addip;boot
> m 0x100000 0x400000
> stdin=serial
> stdout=serial
> stderr=serial
> bootargs=root=/dev/ram rw
> Environment size: 638/262140 bytes
>
>
>
> ------------------------------------------------------------------------
> Yahoo! Photos
> Ring in the New Year with Photo Calendars
> .
> Add photos, events, holidays, whatever.
>
>------------------------------------------------------------------------
>
>#
># Automatically generated make config: don't edit
># Linux kernel version: 2.6.13
># Thu Dec 29 10:54:14 2005
>#
>CONFIG_MMU=y
>CONFIG_GENERIC_HARDIRQS=y
>CONFIG_RWSEM_XCHGADD_ALGORITHM=y
>CONFIG_GENERIC_CALIBRATE_DELAY=y
>CONFIG_HAVE_DEC_LOCK=y
>CONFIG_PPC=y
>CONFIG_PPC32=y
>CONFIG_GENERIC_NVRAM=y
>CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
>
>#
># Code maturity level options
>#
>CONFIG_EXPERIMENTAL=y
>CONFIG_CLEAN_COMPILE=y
>CONFIG_BROKEN_ON_SMP=y
>CONFIG_INIT_ENV_ARG_LIMIT=32
>
>#
># General setup
>#
>CONFIG_LOCALVERSION=""
># CONFIG_SWAP is not set
>CONFIG_SYSVIPC=y
># CONFIG_POSIX_MQUEUE is not set
># CONFIG_BSD_PROCESS_ACCT is not set
>CONFIG_SYSCTL=y
># CONFIG_AUDIT is not set
># CONFIG_HOTPLUG is not set
>CONFIG_KOBJECT_UEVENT=y
># CONFIG_IKCONFIG is not set
># CONFIG_EMBEDDED is not set
>CONFIG_KALLSYMS=y
># CONFIG_KALLSYMS_EXTRA_PASS is not set
>CONFIG_PRINTK=y
>CONFIG_BUG=y
>CONFIG_BASE_FULL=y
>CONFIG_FUTEX=y
>CONFIG_EPOLL=y
>CONFIG_SHMEM=y
>CONFIG_CC_ALIGN_FUNCTIONS=0
>CONFIG_CC_ALIGN_LABELS=0
>CONFIG_CC_ALIGN_LOOPS=0
>CONFIG_CC_ALIGN_JUMPS=0
># CONFIG_TINY_SHMEM is not set
>CONFIG_BASE_SMALL=0
>
>#
># Loadable module support
>#
># CONFIG_MODULES is not set
>
>#
># Processor
>#
># CONFIG_6xx is not set
># CONFIG_40x is not set
># CONFIG_44x is not set
># CONFIG_POWER3 is not set
># CONFIG_POWER4 is not set
>CONFIG_8xx=y
># CONFIG_E200 is not set
># CONFIG_E500 is not set
># CONFIG_MATH_EMULATION is not set
># CONFIG_KEXEC is not set
># CONFIG_CPU_FREQ is not set
># CONFIG_WANT_EARLY_SERIAL is not set
>CONFIG_EMBEDDEDBOOT=y
>CONFIG_NOT_COHERENT_CACHE=y
>
>#
># Platform options
>#
>CONFIG_FADS=y
># CONFIG_RPXLITE is not set
># CONFIG_RPXCLASSIC is not set
># CONFIG_BSEIP is not set
>CONFIG_MPC8XXFADS=y
># CONFIG_MPC86XADS is not set
># CONFIG_MPC885ADS is not set
># CONFIG_TQM823L is not set
># CONFIG_TQM850L is not set
># CONFIG_TQM855L is not set
># CONFIG_TQM860L is not set
># CONFIG_FPS850L is not set
># CONFIG_SPD823TS is not set
># CONFIG_IVMS8 is not set
># CONFIG_IVML24 is not set
># CONFIG_SM850 is not set
># CONFIG_HERMES_PRO is not set
># CONFIG_IP860 is not set
># CONFIG_LWMON is not set
># CONFIG_PCU_E is not set
># CONFIG_CCM is not set
># CONFIG_LANTEC is not set
># CONFIG_MBX is not set
># CONFIG_WINCEPT is not set
># CONFIG_HIGHMEM is not set
>CONFIG_HZ_100=y
># CONFIG_HZ_250 is not set
># CONFIG_HZ_1000 is not set
>CONFIG_HZ=100
>CONFIG_PREEMPT_NONE=y
># CONFIG_PREEMPT_VOLUNTARY is not set
># CONFIG_PREEMPT is not set
>CONFIG_SELECT_MEMORY_MODEL=y
>CONFIG_FLATMEM_MANUAL=y
># CONFIG_DISCONTIGMEM_MANUAL is not set
># CONFIG_SPARSEMEM_MANUAL is not set
>CONFIG_FLATMEM=y
>CONFIG_FLAT_NODE_MEM_MAP=y
>CONFIG_BINFMT_ELF=y
># CONFIG_BINFMT_MISC is not set
>CONFIG_CMDLINE_BOOL=y
>CONFIG_CMDLINE="console=ttyS1,57600 console=tty1 root=/dev/ram"
># CONFIG_PM is not set
>CONFIG_SECCOMP=y
>CONFIG_ISA_DMA_API=y
>
>#
># Bus options
>#
># CONFIG_PCI is not set
># CONFIG_PCI_DOMAINS is not set
># CONFIG_PCI_QSPAN is not set
>
>#
># PCCARD (PCMCIA/CardBus) support
>#
># CONFIG_PCCARD is not set
>
>#
># Advanced setup
>#
># CONFIG_ADVANCED_OPTIONS is not set
>
>#
># Default settings for advanced configuration options are used
>#
>CONFIG_HIGHMEM_START=0xfe000000
>CONFIG_LOWMEM_SIZE=0x30000000
>CONFIG_KERNEL_START=0xc0000000
>CONFIG_TASK_SIZE=0x80000000
>CONFIG_CONSISTENT_START=0xff100000
>CONFIG_CONSISTENT_SIZE=0x00200000
>CONFIG_BOOT_LOAD=0x00400000
>
>#
># Networking
>#
>CONFIG_NET=y
>
>#
># Networking options
>#
>CONFIG_PACKET=y
>CONFIG_PACKET_MMAP=y
>CONFIG_UNIX=y
># CONFIG_NET_KEY is not set
>CONFIG_INET=y
># CONFIG_IP_MULTICAST is not set
># CONFIG_IP_ADVANCED_ROUTER is not set
>CONFIG_IP_FIB_HASH=y
>CONFIG_IP_PNP=y
>CONFIG_IP_PNP_DHCP=y
>CONFIG_IP_PNP_BOOTP=y
>CONFIG_IP_PNP_RARP=y
># CONFIG_NET_IPIP is not set
># CONFIG_NET_IPGRE is not set
>CONFIG_ARPD=y
># CONFIG_SYN_COOKIES is not set
># CONFIG_INET_AH is not set
># CONFIG_INET_ESP is not set
># CONFIG_INET_IPCOMP is not set
># CONFIG_INET_TUNNEL is not set
>CONFIG_IP_TCPDIAG=y
>CONFIG_IP_TCPDIAG_IPV6=y
># CONFIG_TCP_CONG_ADVANCED is not set
>CONFIG_TCP_CONG_BIC=y
>CONFIG_IPV6=y
># CONFIG_IPV6_PRIVACY is not set
># CONFIG_INET6_AH is not set
># CONFIG_INET6_ESP is not set
># CONFIG_INET6_IPCOMP is not set
># CONFIG_INET6_TUNNEL is not set
># CONFIG_IPV6_TUNNEL is not set
># CONFIG_NETFILTER is not set
>
>#
># SCTP Configuration (EXPERIMENTAL)
>#
># CONFIG_IP_SCTP is not set
># CONFIG_ATM is not set
>CONFIG_BRIDGE=y
># CONFIG_VLAN_8021Q is not set
># CONFIG_DECNET is not set
># CONFIG_LLC2 is not set
># CONFIG_IPX is not set
># CONFIG_ATALK is not set
># CONFIG_X25 is not set
># CONFIG_LAPB is not set
># CONFIG_NET_DIVERT is not set
># CONFIG_ECONET is not set
># CONFIG_WAN_ROUTER is not set
># CONFIG_NET_SCHED is not set
># CONFIG_NET_CLS_ROUTE is not set
>
>#
># Network testing
>#
># CONFIG_NET_PKTGEN is not set
># CONFIG_HAMRADIO is not set
># CONFIG_IRDA is not set
># CONFIG_BT is not set
>
>#
># Device Drivers
>#
>
>#
># Generic Driver Options
>#
>CONFIG_STANDALONE=y
>CONFIG_PREVENT_FIRMWARE_BUILD=y
># CONFIG_FW_LOADER is not set
>
>#
># Memory Technology Devices (MTD)
>#
># CONFIG_MTD is not set
>
>#
># Parallel port support
>#
># CONFIG_PARPORT is not set
>
>#
># Plug and Play support
>#
>
>#
># Block devices
>#
># CONFIG_BLK_DEV_FD is not set
># CONFIG_BLK_DEV_COW_COMMON is not set
># CONFIG_BLK_DEV_LOOP is not set
># CONFIG_BLK_DEV_NBD is not set
>CONFIG_BLK_DEV_RAM=y
>CONFIG_BLK_DEV_RAM_COUNT=16
>CONFIG_BLK_DEV_RAM_SIZE=4096
>CONFIG_BLK_DEV_INITRD=y
>CONFIG_INITRAMFS_SOURCE=""
># CONFIG_LBD is not set
># CONFIG_CDROM_PKTCDVD is not set
>
>#
># IO Schedulers
>#
>CONFIG_IOSCHED_NOOP=y
># CONFIG_IOSCHED_AS is not set
># CONFIG_IOSCHED_DEADLINE is not set
># CONFIG_IOSCHED_CFQ is not set
># CONFIG_ATA_OVER_ETH is not set
>
>#
># ATA/ATAPI/MFM/RLL support
>#
># CONFIG_IDE is not set
>
>#
># SCSI device support
>#
># CONFIG_SCSI is not set
>
>#
># Multi-device support (RAID and LVM)
>#
># CONFIG_MD is not set
>
>#
># Fusion MPT device support
>#
># CONFIG_FUSION is not set
>
>#
># IEEE 1394 (FireWire) support
>#
>
>#
># I2O device support
>#
>
>#
># Macintosh device drivers
>#
>
>#
># Network device support
>#
>CONFIG_NETDEVICES=y
># CONFIG_DUMMY is not set
># CONFIG_BONDING is not set
># CONFIG_EQUALIZER is not set
># CONFIG_TUN is not set
>
>#
># Ethernet (10 or 100Mbit)
>#
>CONFIG_NET_ETHERNET=y
>CONFIG_MII=y
>
>#
># Ethernet (1000 Mbit)
>#
>
>#
># Ethernet (10000 Mbit)
>#
>
>#
># Token Ring devices
>#
>
>#
># Wireless LAN (non-hamradio)
>#
># CONFIG_NET_RADIO is not set
>
>#
># Wan interfaces
>#
># CONFIG_WAN is not set
># CONFIG_PPP is not set
># CONFIG_SLIP is not set
># CONFIG_SHAPER is not set
># CONFIG_NETCONSOLE is not set
># CONFIG_NETPOLL is not set
># CONFIG_NET_POLL_CONTROLLER is not set
>
>#
># ISDN subsystem
>#
># CONFIG_ISDN is not set
>
>#
># Telephony Support
>#
># CONFIG_PHONE is not set
>
>#
># Input device support
>#
>CONFIG_INPUT=y
>
>#
># Userland interfaces
>#
>CONFIG_INPUT_MOUSEDEV=y
>CONFIG_INPUT_MOUSEDEV_PSAUX=y
>CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
>CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
># CONFIG_INPUT_JOYDEV is not set
># CONFIG_INPUT_TSDEV is not set
># CONFIG_INPUT_EVDEV is not set
># CONFIG_INPUT_EVBUG is not set
>
>#
># Input Device Drivers
>#
># CONFIG_INPUT_KEYBOARD is not set
># CONFIG_INPUT_MOUSE is not set
># CONFIG_INPUT_JOYSTICK is not set
># CONFIG_INPUT_TOUCHSCREEN is not set
># CONFIG_INPUT_MISC is not set
>
>#
># Hardware I/O ports
>#
># CONFIG_SERIO is not set
># CONFIG_GAMEPORT is not set
>
>#
># Character devices
>#
>CONFIG_VT=y
>CONFIG_VT_CONSOLE=y
>CONFIG_HW_CONSOLE=y
>CONFIG_SERIAL_NONSTANDARD=y
># CONFIG_COMPUTONE is not set
># CONFIG_ROCKETPORT is not set
># CONFIG_CYCLADES is not set
># CONFIG_DIGIEPCA is not set
># CONFIG_MOXA_INTELLIO is not set
># CONFIG_MOXA_SMARTIO is not set
># CONFIG_ISI is not set
># CONFIG_SYNCLINKMP is not set
># CONFIG_N_HDLC is not set
># CONFIG_RISCOM8 is not set
># CONFIG_SPECIALIX is not set
># CONFIG_SX is not set
># CONFIG_RIO is not set
># CONFIG_STALDRV is not set
>
>#
># Serial drivers
>#
># CONFIG_SERIAL_8250 is not set
>
>#
># Non-8250 serial port support
>#
>CONFIG_SERIAL_CORE=y
>CONFIG_SERIAL_CORE_CONSOLE=y
>CONFIG_SERIAL_CPM=y
>CONFIG_SERIAL_CPM_CONSOLE=y
># CONFIG_SERIAL_CPM_SCC1 is not set
># CONFIG_SERIAL_CPM_SCC2 is not set
># CONFIG_SERIAL_CPM_SCC3 is not set
># CONFIG_SERIAL_CPM_SCC4 is not set
># CONFIG_SERIAL_CPM_SMC1 is not set
>CONFIG_SERIAL_CPM_SMC2=y
>CONFIG_UNIX98_PTYS=y
># CONFIG_LEGACY_PTYS is not set
>
>#
># IPMI
>#
># CONFIG_IPMI_HANDLER is not set
>
>#
># Watchdog Cards
>#
># CONFIG_WATCHDOG is not set
># CONFIG_NVRAM is not set
># CONFIG_GEN_RTC is not set
># CONFIG_DTLK is not set
># CONFIG_R3964 is not set
>
>#
># Ftape, the floppy tape device driver
>#
># CONFIG_AGP is not set
># CONFIG_RAW_DRIVER is not set
>
>#
># TPM devices
>#
>
>#
># I2C support
>#
># CONFIG_I2C is not set
># CONFIG_I2C_SENSOR is not set
>
>#
># Dallas's 1-wire bus
>#
># CONFIG_W1 is not set
>
>#
># Hardware Monitoring support
>#
># CONFIG_HWMON is not set
>
>#
># Misc devices
>#
>
>#
># Multimedia devices
>#
># CONFIG_VIDEO_DEV is not set
>
>#
># Digital Video Broadcasting Devices
>#
># CONFIG_DVB is not set
>
>#
># Graphics support
>#
># CONFIG_FB is not set
>
>#
># Console display driver support
>#
>CONFIG_DUMMY_CONSOLE=y
>
>#
># Sound
>#
># CONFIG_SOUND is not set
>
>#
># USB support
>#
># CONFIG_USB_ARCH_HAS_HCD is not set
># CONFIG_USB_ARCH_HAS_OHCI is not set
>
>#
># USB Gadget Support
>#
># CONFIG_USB_GADGET is not set
>
>#
># MMC/SD Card support
>#
># CONFIG_MMC is not set
>
>#
># InfiniBand support
>#
>
>#
># SN Devices
>#
>
>#
># File systems
>#
>CONFIG_EXT2_FS=y
>CONFIG_EXT2_FS_XATTR=y
>CONFIG_EXT2_FS_POSIX_ACL=y
>CONFIG_EXT2_FS_SECURITY=y
>CONFIG_EXT2_FS_XIP=y
>CONFIG_FS_XIP=y
># CONFIG_EXT3_FS is not set
># CONFIG_JBD is not set
>CONFIG_FS_MBCACHE=y
># CONFIG_REISERFS_FS is not set
># CONFIG_JFS_FS is not set
>CONFIG_FS_POSIX_ACL=y
>
>#
># XFS support
>#
># CONFIG_XFS_FS is not set
># CONFIG_MINIX_FS is not set
>CONFIG_ROMFS_FS=y
>CONFIG_INOTIFY=y
># CONFIG_QUOTA is not set
>CONFIG_DNOTIFY=y
># CONFIG_AUTOFS_FS is not set
># CONFIG_AUTOFS4_FS is not set
>
>#
># CD-ROM/DVD Filesystems
>#
># CONFIG_ISO9660_FS is not set
># CONFIG_UDF_FS is not set
>
>#
># DOS/FAT/NT Filesystems
>#
># CONFIG_MSDOS_FS is not set
># CONFIG_VFAT_FS is not set
># CONFIG_NTFS_FS is not set
>
>#
># Pseudo filesystems
>#
>CONFIG_PROC_FS=y
># CONFIG_PROC_KCORE is not set
>CONFIG_SYSFS=y
># CONFIG_DEVPTS_FS_XATTR is not set
># CONFIG_TMPFS is not set
># CONFIG_HUGETLB_PAGE is not set
>CONFIG_RAMFS=y
>
>#
># Miscellaneous filesystems
>#
># CONFIG_ADFS_FS is not set
># CONFIG_AFFS_FS is not set
># CONFIG_HFS_FS is not set
># CONFIG_HFSPLUS_FS is not set
># CONFIG_BEFS_FS is not set
># CONFIG_BFS_FS is not set
># CONFIG_EFS_FS is not set
># CONFIG_CRAMFS is not set
># CONFIG_VXFS_FS is not set
># CONFIG_HPFS_FS is not set
># CONFIG_QNX4FS_FS is not set
># CONFIG_SYSV_FS is not set
># CONFIG_UFS_FS is not set
>
>#
># Network File Systems
>#
>CONFIG_NFS_FS=y
># CONFIG_NFS_V3 is not set
># CONFIG_NFS_V4 is not set
># CONFIG_NFS_DIRECTIO is not set
># CONFIG_NFSD is not set
>CONFIG_ROOT_NFS=y
>CONFIG_LOCKD=y
>CONFIG_NFS_COMMON=y
>CONFIG_SUNRPC=y
># CONFIG_RPCSEC_GSS_KRB5 is not set
># CONFIG_RPCSEC_GSS_SPKM3 is not set
># CONFIG_SMB_FS is not set
># CONFIG_CIFS is not set
># CONFIG_NCP_FS is not set
># CONFIG_CODA_FS is not set
># CONFIG_AFS_FS is not set
>
>#
># Partition Types
>#
># CONFIG_PARTITION_ADVANCED is not set
>CONFIG_MSDOS_PARTITION=y
>
>#
># Native Language Support
>#
># CONFIG_NLS is not set
>
>#
># MPC8xx CPM Options
>#
># CONFIG_SCC_ENET is not set
>CONFIG_FEC_ENET=y
>CONFIG_USE_MDIO=y
>CONFIG_FEC_AM79C874=y
># CONFIG_FEC_LXT970 is not set
># CONFIG_FEC_LXT971 is not set
># CONFIG_FEC_QS6612 is not set
>CONFIG_ENET_BIG_BUFFERS=y
>
>#
># Generic MPC8xx Options
>#
># CONFIG_8xx_COPYBACK is not set
># CONFIG_8xx_CPU6 is not set
>CONFIG_NO_UCODE_PATCH=y
># CONFIG_USB_SOF_UCODE_PATCH is not set
># CONFIG_I2C_SPI_UCODE_PATCH is not set
># CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
>
>#
># Library routines
>#
># CONFIG_CRC_CCITT is not set
># CONFIG_CRC32 is not set
># CONFIG_LIBCRC32C is not set
>
>#
># Profiling support
>#
># CONFIG_PROFILING is not set
>
>#
># Kernel hacking
>#
># CONFIG_PRINTK_TIME is not set
># CONFIG_DEBUG_KERNEL is not set
>CONFIG_LOG_BUF_SHIFT=14
>
>#
># Security options
>#
># CONFIG_KEYS is not set
># CONFIG_SECURITY is not set
>
>#
># Cryptographic options
>#
># CONFIG_CRYPTO is not set
>
>#
># Hardware crypto devices
>#
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Linuxppc-embedded mailing list
>Linuxppc-embedded@ozlabs.org
>https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>
---------------------------------
Yahoo! Photos
Ring in the New Year with Photo Calendars. Add photos, events, holidays, whatever.
[-- Attachment #2: Type: text/html, Size: 22952 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2005-12-30 4:44 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-12-28 11:58 Porting Linux2.6.13 on MPC860T custom build board venkatajagadeesh p
2005-12-28 13:22 ` Vitaly Bordug
-- strict thread matches above, loose matches on Subject: below --
2005-12-29 5:28 venkatajagadeesh p
[not found] <43B3958E.4010002@writeme.com>
2005-12-29 10:07 ` venkatajagadeesh p
2005-12-29 15:24 ` Sinan Akman
2005-12-30 4:44 venkatajagadeesh p
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).