* Porting Linux2.6.13 on MPC860T custom build board
@ 2005-12-28 11:58 venkatajagadeesh p
2005-12-28 13:22 ` Vitaly Bordug
0 siblings, 1 reply; 6+ messages in thread
From: venkatajagadeesh p @ 2005-12-28 11:58 UTC (permalink / raw)
To: linuxppc-embedded
[-- Attachment #1.1: Type: text/plain, Size: 821 bytes --]
Hi,
We are trying to port Linux-2.6.13 on Custom build MPC860T, board, We are unable to see any messages on console. We got the output given below. Please help us in porting the kernel.
I am attaching the config file .
=>bootm 0x100000
## Booting image at 00100000 ...
Image Name: Linux-2.6.13
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 958189 Bytes = 935.7 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... gunzip function called
OK
do_bootm_linux called ...do_bootm_linux after ...part2 do_boot_linux before RAM
Disk image loading ...
No initrd
## Transferring control to Linux (at address 00000000) ...
---------------------------------
Yahoo! for Good - Make a difference this year.
[-- Attachment #1.2: Type: text/html, Size: 1248 bytes --]
[-- Attachment #2: 172188218-.config --]
[-- Type: text/plain, Size: 11858 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.13
# Wed Dec 28 16:20:34 2005
#
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_PPC=y
CONFIG_PPC32=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
# CONFIG_MODULES is not set
#
# Processor
#
# CONFIG_6xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_POWER3 is not set
# CONFIG_POWER4 is not set
CONFIG_8xx=y
# CONFIG_E200 is not set
# CONFIG_E500 is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_KEXEC is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_WANT_EARLY_SERIAL is not set
CONFIG_EMBEDDEDBOOT=y
CONFIG_NOT_COHERENT_CACHE=y
#
# Platform options
#
CONFIG_FADS=y
# CONFIG_RPXLITE is not set
# CONFIG_RPXCLASSIC is not set
# CONFIG_BSEIP is not set
CONFIG_MPC8XXFADS=y
# CONFIG_MPC86XADS is not set
# CONFIG_MPC885ADS is not set
# CONFIG_TQM823L is not set
# CONFIG_TQM850L is not set
# CONFIG_TQM855L is not set
# CONFIG_TQM860L is not set
# CONFIG_FPS850L is not set
# CONFIG_SPD823TS is not set
# CONFIG_IVMS8 is not set
# CONFIG_IVML24 is not set
# CONFIG_SM850 is not set
# CONFIG_HERMES_PRO is not set
# CONFIG_IP860 is not set
# CONFIG_LWMON is not set
# CONFIG_PCU_E is not set
# CONFIG_CCM is not set
# CONFIG_LANTEC is not set
# CONFIG_MBX is not set
# CONFIG_WINCEPT is not set
# CONFIG_HIGHMEM is not set
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
# Bus options
#
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_QSPAN is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_BOOT_LOAD=0x00400000
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_ARPD=y
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
CONFIG_IP_TCPDIAG_IPV6=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
CONFIG_BRIDGE=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_SCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# I2O device support
#
#
# Macintosh device drivers
#
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
#
# Ethernet (1000 Mbit)
#
#
# Ethernet (10000 Mbit)
#
#
# Token Ring devices
#
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
CONFIG_SERIAL_CPM_SCC1=y
CONFIG_SERIAL_CPM_SCC2=y
# CONFIG_SERIAL_CPM_SCC3 is not set
CONFIG_SERIAL_CPM_SCC4=y
CONFIG_SERIAL_CPM_SMC1=y
CONFIG_SERIAL_CPM_SMC2=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
#
# I2C support
#
# CONFIG_I2C is not set
# CONFIG_I2C_SENSOR is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
#
# Misc devices
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
#
# SN Devices
#
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_SYSFS=y
# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
# CONFIG_NLS is not set
#
# MPC8xx CPM Options
#
# CONFIG_SCC_ENET is not set
CONFIG_FEC_ENET=y
CONFIG_USE_MDIO=y
CONFIG_FEC_AM79C874=y
# CONFIG_FEC_LXT970 is not set
# CONFIG_FEC_LXT971 is not set
# CONFIG_FEC_QS6612 is not set
CONFIG_ENET_BIG_BUFFERS=y
#
# Generic MPC8xx Options
#
# CONFIG_8xx_COPYBACK is not set
# CONFIG_8xx_CPU6 is not set
CONFIG_NO_UCODE_PATCH=y
# CONFIG_USB_SOF_UCODE_PATCH is not set
# CONFIG_I2C_SPI_UCODE_PATCH is not set
# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Porting Linux2.6.13 on MPC860T custom build board
2005-12-28 11:58 venkatajagadeesh p
@ 2005-12-28 13:22 ` Vitaly Bordug
0 siblings, 0 replies; 6+ messages in thread
From: Vitaly Bordug @ 2005-12-28 13:22 UTC (permalink / raw)
To: venkatajagadeesh p; +Cc: linuxppc-embedded
venkatajagadeesh p wrote:
>
> Hi,
> We are trying to port Linux-2.6.13 on Custom build MPC860T, board,
> We are unable to see any messages on console. We got the output given
> below. Please help us in porting the kernel.
> I am attaching the config file .
>
> =>bootm 0x100000
> ## Booting image at 00100000 ...
> Image Name: Linux-2.6.13
> Image Type: PowerPC Linux Kernel Image (gzip compressed)
> Data Size: 958189 Bytes = 935.7 kB
> Load Address: 00000000
> Entry Point: 00000000
> Verifying Checksum ... OK
> Uncompressing Kernel Image ... gunzip function called
> OK
> do_bootm_linux called ...do_bootm_linux after ...part2 do_boot_linux
> before RAM
> Disk image loading ...
> No initrd
> ## Transferring control to Linux (at address 00000000) ...
>
Most probably, something odd with serial setup.
You have enabled just all the stuff (SCC/SMC), but (on 8xx at least)
they can hardly live together, having alternative - conflicting IO pin configurations.
> ------------------------------------------------------------------------
> Yahoo! for Good - Make a difference this year.
> <http://us.rd.yahoo.com/mail_us/taglines/charity/*http://brand.yahoo.com/cybergivingweek2005/>
>
>
>
> ------------------------------------------------------------------------
>
> #
> # Automatically generated make config: don't edit
> # Linux kernel version: 2.6.13
> # Wed Dec 28 16:20:34 2005
> #
> CONFIG_MMU=y
> CONFIG_GENERIC_HARDIRQS=y
> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> CONFIG_GENERIC_CALIBRATE_DELAY=y
> CONFIG_HAVE_DEC_LOCK=y
> CONFIG_PPC=y
> CONFIG_PPC32=y
> CONFIG_GENERIC_NVRAM=y
> CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
>
> #
> # Code maturity level options
> #
> CONFIG_EXPERIMENTAL=y
> CONFIG_CLEAN_COMPILE=y
> CONFIG_BROKEN_ON_SMP=y
> CONFIG_INIT_ENV_ARG_LIMIT=32
>
> #
> # General setup
> #
> CONFIG_LOCALVERSION=""
> # CONFIG_SWAP is not set
> CONFIG_SYSVIPC=y
> # CONFIG_POSIX_MQUEUE is not set
> # CONFIG_BSD_PROCESS_ACCT is not set
> CONFIG_SYSCTL=y
> # CONFIG_AUDIT is not set
> # CONFIG_HOTPLUG is not set
> CONFIG_KOBJECT_UEVENT=y
> # CONFIG_IKCONFIG is not set
> # CONFIG_EMBEDDED is not set
> CONFIG_KALLSYMS=y
> # CONFIG_KALLSYMS_EXTRA_PASS is not set
> CONFIG_PRINTK=y
> CONFIG_BUG=y
> CONFIG_BASE_FULL=y
> CONFIG_FUTEX=y
> CONFIG_EPOLL=y
> CONFIG_SHMEM=y
> CONFIG_CC_ALIGN_FUNCTIONS=0
> CONFIG_CC_ALIGN_LABELS=0
> CONFIG_CC_ALIGN_LOOPS=0
> CONFIG_CC_ALIGN_JUMPS=0
> # CONFIG_TINY_SHMEM is not set
> CONFIG_BASE_SMALL=0
>
> #
> # Loadable module support
> #
> # CONFIG_MODULES is not set
>
> #
> # Processor
> #
> # CONFIG_6xx is not set
> # CONFIG_40x is not set
> # CONFIG_44x is not set
> # CONFIG_POWER3 is not set
> # CONFIG_POWER4 is not set
> CONFIG_8xx=y
> # CONFIG_E200 is not set
> # CONFIG_E500 is not set
> # CONFIG_MATH_EMULATION is not set
> # CONFIG_KEXEC is not set
> # CONFIG_CPU_FREQ is not set
> # CONFIG_WANT_EARLY_SERIAL is not set
> CONFIG_EMBEDDEDBOOT=y
> CONFIG_NOT_COHERENT_CACHE=y
>
> #
> # Platform options
> #
> CONFIG_FADS=y
> # CONFIG_RPXLITE is not set
> # CONFIG_RPXCLASSIC is not set
> # CONFIG_BSEIP is not set
> CONFIG_MPC8XXFADS=y
> # CONFIG_MPC86XADS is not set
> # CONFIG_MPC885ADS is not set
> # CONFIG_TQM823L is not set
> # CONFIG_TQM850L is not set
> # CONFIG_TQM855L is not set
> # CONFIG_TQM860L is not set
> # CONFIG_FPS850L is not set
> # CONFIG_SPD823TS is not set
> # CONFIG_IVMS8 is not set
> # CONFIG_IVML24 is not set
> # CONFIG_SM850 is not set
> # CONFIG_HERMES_PRO is not set
> # CONFIG_IP860 is not set
> # CONFIG_LWMON is not set
> # CONFIG_PCU_E is not set
> # CONFIG_CCM is not set
> # CONFIG_LANTEC is not set
> # CONFIG_MBX is not set
> # CONFIG_WINCEPT is not set
> # CONFIG_HIGHMEM is not set
> CONFIG_HZ_100=y
> # CONFIG_HZ_250 is not set
> # CONFIG_HZ_1000 is not set
> CONFIG_HZ=100
> CONFIG_PREEMPT_NONE=y
> # CONFIG_PREEMPT_VOLUNTARY is not set
> # CONFIG_PREEMPT is not set
> CONFIG_SELECT_MEMORY_MODEL=y
> CONFIG_FLATMEM_MANUAL=y
> # CONFIG_DISCONTIGMEM_MANUAL is not set
> # CONFIG_SPARSEMEM_MANUAL is not set
> CONFIG_FLATMEM=y
> CONFIG_FLAT_NODE_MEM_MAP=y
> CONFIG_BINFMT_ELF=y
> # CONFIG_BINFMT_MISC is not set
> # CONFIG_CMDLINE_BOOL is not set
> # CONFIG_PM is not set
> CONFIG_SECCOMP=y
> CONFIG_ISA_DMA_API=y
>
> #
> # Bus options
> #
> # CONFIG_PCI is not set
> # CONFIG_PCI_DOMAINS is not set
> # CONFIG_PCI_QSPAN is not set
>
> #
> # PCCARD (PCMCIA/CardBus) support
> #
> # CONFIG_PCCARD is not set
>
> #
> # Advanced setup
> #
> # CONFIG_ADVANCED_OPTIONS is not set
>
> #
> # Default settings for advanced configuration options are used
> #
> CONFIG_HIGHMEM_START=0xfe000000
> CONFIG_LOWMEM_SIZE=0x30000000
> CONFIG_KERNEL_START=0xc0000000
> CONFIG_TASK_SIZE=0x80000000
> CONFIG_CONSISTENT_START=0xff100000
> CONFIG_CONSISTENT_SIZE=0x00200000
> CONFIG_BOOT_LOAD=0x00400000
>
> #
> # Networking
> #
> CONFIG_NET=y
>
> #
> # Networking options
> #
> CONFIG_PACKET=y
> CONFIG_PACKET_MMAP=y
> CONFIG_UNIX=y
> # CONFIG_NET_KEY is not set
> CONFIG_INET=y
> # CONFIG_IP_MULTICAST is not set
> # CONFIG_IP_ADVANCED_ROUTER is not set
> CONFIG_IP_FIB_HASH=y
> CONFIG_IP_PNP=y
> CONFIG_IP_PNP_DHCP=y
> CONFIG_IP_PNP_BOOTP=y
> CONFIG_IP_PNP_RARP=y
> # CONFIG_NET_IPIP is not set
> # CONFIG_NET_IPGRE is not set
> CONFIG_ARPD=y
> # CONFIG_SYN_COOKIES is not set
> # CONFIG_INET_AH is not set
> # CONFIG_INET_ESP is not set
> # CONFIG_INET_IPCOMP is not set
> # CONFIG_INET_TUNNEL is not set
> CONFIG_IP_TCPDIAG=y
> CONFIG_IP_TCPDIAG_IPV6=y
> # CONFIG_TCP_CONG_ADVANCED is not set
> CONFIG_TCP_CONG_BIC=y
> CONFIG_IPV6=y
> # CONFIG_IPV6_PRIVACY is not set
> # CONFIG_INET6_AH is not set
> # CONFIG_INET6_ESP is not set
> # CONFIG_INET6_IPCOMP is not set
> # CONFIG_INET6_TUNNEL is not set
> # CONFIG_IPV6_TUNNEL is not set
> # CONFIG_NETFILTER is not set
>
> #
> # SCTP Configuration (EXPERIMENTAL)
> #
> # CONFIG_IP_SCTP is not set
> # CONFIG_ATM is not set
> CONFIG_BRIDGE=y
> # CONFIG_VLAN_8021Q is not set
> # CONFIG_DECNET is not set
> # CONFIG_LLC2 is not set
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_NET_DIVERT is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
> # CONFIG_NET_SCHED is not set
> # CONFIG_NET_CLS_ROUTE is not set
>
> #
> # Network testing
> #
> # CONFIG_NET_PKTGEN is not set
> # CONFIG_HAMRADIO is not set
> # CONFIG_IRDA is not set
> # CONFIG_BT is not set
>
> #
> # Device Drivers
> #
>
> #
> # Generic Driver Options
> #
> CONFIG_STANDALONE=y
> CONFIG_PREVENT_FIRMWARE_BUILD=y
> # CONFIG_FW_LOADER is not set
>
> #
> # Memory Technology Devices (MTD)
> #
> # CONFIG_MTD is not set
>
> #
> # Parallel port support
> #
> # CONFIG_PARPORT is not set
>
> #
> # Plug and Play support
> #
>
> #
> # Block devices
> #
> # CONFIG_BLK_DEV_FD is not set
> # CONFIG_BLK_DEV_COW_COMMON is not set
> # CONFIG_BLK_DEV_LOOP is not set
> # CONFIG_BLK_DEV_NBD is not set
> CONFIG_BLK_DEV_RAM=y
> CONFIG_BLK_DEV_RAM_COUNT=16
> CONFIG_BLK_DEV_RAM_SIZE=4096
> CONFIG_BLK_DEV_INITRD=y
> CONFIG_INITRAMFS_SOURCE=""
> # CONFIG_LBD is not set
> # CONFIG_CDROM_PKTCDVD is not set
>
> #
> # IO Schedulers
> #
> CONFIG_IOSCHED_NOOP=y
> # CONFIG_IOSCHED_AS is not set
> # CONFIG_IOSCHED_DEADLINE is not set
> # CONFIG_IOSCHED_CFQ is not set
> # CONFIG_ATA_OVER_ETH is not set
>
> #
> # ATA/ATAPI/MFM/RLL support
> #
> # CONFIG_IDE is not set
>
> #
> # SCSI device support
> #
> # CONFIG_SCSI is not set
>
> #
> # Multi-device support (RAID and LVM)
> #
> # CONFIG_MD is not set
>
> #
> # Fusion MPT device support
> #
> # CONFIG_FUSION is not set
>
> #
> # IEEE 1394 (FireWire) support
> #
>
> #
> # I2O device support
> #
>
> #
> # Macintosh device drivers
> #
>
> #
> # Network device support
> #
> CONFIG_NETDEVICES=y
> # CONFIG_DUMMY is not set
> # CONFIG_BONDING is not set
> # CONFIG_EQUALIZER is not set
> # CONFIG_TUN is not set
>
> #
> # Ethernet (10 or 100Mbit)
> #
> CONFIG_NET_ETHERNET=y
> CONFIG_MII=y
>
> #
> # Ethernet (1000 Mbit)
> #
>
> #
> # Ethernet (10000 Mbit)
> #
>
> #
> # Token Ring devices
> #
>
> #
> # Wireless LAN (non-hamradio)
> #
> # CONFIG_NET_RADIO is not set
>
> #
> # Wan interfaces
> #
> # CONFIG_WAN is not set
> # CONFIG_PPP is not set
> # CONFIG_SLIP is not set
> # CONFIG_SHAPER is not set
> # CONFIG_NETCONSOLE is not set
> # CONFIG_NETPOLL is not set
> # CONFIG_NET_POLL_CONTROLLER is not set
>
> #
> # ISDN subsystem
> #
> # CONFIG_ISDN is not set
>
> #
> # Telephony Support
> #
> # CONFIG_PHONE is not set
>
> #
> # Input device support
> #
> CONFIG_INPUT=y
>
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_INPUT_MOUSEDEV_PSAUX=y
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> # CONFIG_INPUT_JOYDEV is not set
> # CONFIG_INPUT_TSDEV is not set
> # CONFIG_INPUT_EVDEV is not set
> # CONFIG_INPUT_EVBUG is not set
>
> #
> # Input Device Drivers
> #
> # CONFIG_INPUT_KEYBOARD is not set
> # CONFIG_INPUT_MOUSE is not set
> # CONFIG_INPUT_JOYSTICK is not set
> # CONFIG_INPUT_TOUCHSCREEN is not set
> # CONFIG_INPUT_MISC is not set
>
> #
> # Hardware I/O ports
> #
> # CONFIG_SERIO is not set
> # CONFIG_GAMEPORT is not set
>
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> CONFIG_SERIAL_NONSTANDARD=y
> # CONFIG_COMPUTONE is not set
> # CONFIG_ROCKETPORT is not set
> # CONFIG_CYCLADES is not set
> # CONFIG_DIGIEPCA is not set
> # CONFIG_MOXA_INTELLIO is not set
> # CONFIG_MOXA_SMARTIO is not set
> # CONFIG_ISI is not set
> # CONFIG_SYNCLINKMP is not set
> # CONFIG_N_HDLC is not set
> # CONFIG_RISCOM8 is not set
> # CONFIG_SPECIALIX is not set
> # CONFIG_SX is not set
> # CONFIG_RIO is not set
> # CONFIG_STALDRV is not set
>
> #
> # Serial drivers
> #
> # CONFIG_SERIAL_8250 is not set
>
> #
> # Non-8250 serial port support
> #
> CONFIG_SERIAL_CORE=y
> CONFIG_SERIAL_CORE_CONSOLE=y
> CONFIG_SERIAL_CPM=y
> CONFIG_SERIAL_CPM_CONSOLE=y
> CONFIG_SERIAL_CPM_SCC1=y
> CONFIG_SERIAL_CPM_SCC2=y
> # CONFIG_SERIAL_CPM_SCC3 is not set
> CONFIG_SERIAL_CPM_SCC4=y
> CONFIG_SERIAL_CPM_SMC1=y
> CONFIG_SERIAL_CPM_SMC2=y
> CONFIG_UNIX98_PTYS=y
> # CONFIG_LEGACY_PTYS is not set
>
> #
> # IPMI
> #
> # CONFIG_IPMI_HANDLER is not set
>
> #
> # Watchdog Cards
> #
> # CONFIG_WATCHDOG is not set
> # CONFIG_NVRAM is not set
> # CONFIG_GEN_RTC is not set
> # CONFIG_DTLK is not set
> # CONFIG_R3964 is not set
>
> #
> # Ftape, the floppy tape device driver
> #
> # CONFIG_AGP is not set
> # CONFIG_RAW_DRIVER is not set
>
> #
> # TPM devices
> #
>
> #
> # I2C support
> #
> # CONFIG_I2C is not set
> # CONFIG_I2C_SENSOR is not set
>
> #
> # Dallas's 1-wire bus
> #
> # CONFIG_W1 is not set
>
> #
> # Hardware Monitoring support
> #
> # CONFIG_HWMON is not set
>
> #
> # Misc devices
> #
>
> #
> # Multimedia devices
> #
> # CONFIG_VIDEO_DEV is not set
>
> #
> # Digital Video Broadcasting Devices
> #
> # CONFIG_DVB is not set
>
> #
> # Graphics support
> #
> # CONFIG_FB is not set
>
> #
> # Console display driver support
> #
> CONFIG_DUMMY_CONSOLE=y
>
> #
> # Sound
> #
> # CONFIG_SOUND is not set
>
> #
> # USB support
> #
> # CONFIG_USB_ARCH_HAS_HCD is not set
> # CONFIG_USB_ARCH_HAS_OHCI is not set
>
> #
> # USB Gadget Support
> #
> # CONFIG_USB_GADGET is not set
>
> #
> # MMC/SD Card support
> #
> # CONFIG_MMC is not set
>
> #
> # InfiniBand support
> #
>
> #
> # SN Devices
> #
>
> #
> # File systems
> #
> CONFIG_EXT2_FS=y
> CONFIG_EXT2_FS_XATTR=y
> CONFIG_EXT2_FS_POSIX_ACL=y
> CONFIG_EXT2_FS_SECURITY=y
> CONFIG_EXT2_FS_XIP=y
> CONFIG_FS_XIP=y
> # CONFIG_EXT3_FS is not set
> # CONFIG_JBD is not set
> CONFIG_FS_MBCACHE=y
> # CONFIG_REISERFS_FS is not set
> # CONFIG_JFS_FS is not set
> CONFIG_FS_POSIX_ACL=y
>
> #
> # XFS support
> #
> # CONFIG_XFS_FS is not set
> # CONFIG_MINIX_FS is not set
> CONFIG_ROMFS_FS=y
> CONFIG_INOTIFY=y
> # CONFIG_QUOTA is not set
> CONFIG_DNOTIFY=y
> # CONFIG_AUTOFS_FS is not set
> # CONFIG_AUTOFS4_FS is not set
>
> #
> # CD-ROM/DVD Filesystems
> #
> # CONFIG_ISO9660_FS is not set
> # CONFIG_UDF_FS is not set
>
> #
> # DOS/FAT/NT Filesystems
> #
> # CONFIG_MSDOS_FS is not set
> # CONFIG_VFAT_FS is not set
> # CONFIG_NTFS_FS is not set
>
> #
> # Pseudo filesystems
> #
> CONFIG_PROC_FS=y
> # CONFIG_PROC_KCORE is not set
> CONFIG_SYSFS=y
> # CONFIG_DEVPTS_FS_XATTR is not set
> # CONFIG_TMPFS is not set
> # CONFIG_HUGETLB_PAGE is not set
> CONFIG_RAMFS=y
>
> #
> # Miscellaneous filesystems
> #
> # CONFIG_ADFS_FS is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_HFSPLUS_FS is not set
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EFS_FS is not set
> # CONFIG_CRAMFS is not set
> # CONFIG_VXFS_FS is not set
> # CONFIG_HPFS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_SYSV_FS is not set
> # CONFIG_UFS_FS is not set
>
> #
> # Network File Systems
> #
> CONFIG_NFS_FS=y
> # CONFIG_NFS_V3 is not set
> # CONFIG_NFS_V4 is not set
> # CONFIG_NFS_DIRECTIO is not set
> # CONFIG_NFSD is not set
> CONFIG_ROOT_NFS=y
> CONFIG_LOCKD=y
> CONFIG_NFS_COMMON=y
> CONFIG_SUNRPC=y
> # CONFIG_RPCSEC_GSS_KRB5 is not set
> # CONFIG_RPCSEC_GSS_SPKM3 is not set
> # CONFIG_SMB_FS is not set
> # CONFIG_CIFS is not set
> # CONFIG_NCP_FS is not set
> # CONFIG_CODA_FS is not set
> # CONFIG_AFS_FS is not set
>
> #
> # Partition Types
> #
> # CONFIG_PARTITION_ADVANCED is not set
> CONFIG_MSDOS_PARTITION=y
>
> #
> # Native Language Support
> #
> # CONFIG_NLS is not set
>
> #
> # MPC8xx CPM Options
> #
> # CONFIG_SCC_ENET is not set
> CONFIG_FEC_ENET=y
> CONFIG_USE_MDIO=y
> CONFIG_FEC_AM79C874=y
> # CONFIG_FEC_LXT970 is not set
> # CONFIG_FEC_LXT971 is not set
> # CONFIG_FEC_QS6612 is not set
> CONFIG_ENET_BIG_BUFFERS=y
>
> #
> # Generic MPC8xx Options
> #
> # CONFIG_8xx_COPYBACK is not set
> # CONFIG_8xx_CPU6 is not set
> CONFIG_NO_UCODE_PATCH=y
> # CONFIG_USB_SOF_UCODE_PATCH is not set
> # CONFIG_I2C_SPI_UCODE_PATCH is not set
> # CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
>
> #
> # Library routines
> #
> # CONFIG_CRC_CCITT is not set
> # CONFIG_CRC32 is not set
> # CONFIG_LIBCRC32C is not set
>
> #
> # Profiling support
> #
> # CONFIG_PROFILING is not set
>
> #
> # Kernel hacking
> #
> # CONFIG_PRINTK_TIME is not set
> # CONFIG_DEBUG_KERNEL is not set
> CONFIG_LOG_BUF_SHIFT=14
>
> #
> # Security options
> #
> # CONFIG_KEYS is not set
> # CONFIG_SECURITY is not set
>
> #
> # Cryptographic options
> #
> # CONFIG_CRYPTO is not set
>
> #
> # Hardware crypto devices
> #
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
--
Sincerely,
Vitaly
^ permalink raw reply [flat|nested] 6+ messages in thread
* re: Porting Linux2.6.13 on MPC860T custom build board
@ 2005-12-29 5:28 venkatajagadeesh p
0 siblings, 0 replies; 6+ messages in thread
From: venkatajagadeesh p @ 2005-12-29 5:28 UTC (permalink / raw)
To: linuxppc-embedded
[-- Attachment #1.1: Type: text/plain, Size: 2144 bytes --]
venkatajagadeesh p wrote:
>
> Hi,
> We are trying to port Linux-2.6.13 on Custom build MPC860T, board,
> We are unable to see any messages on console. We got the output given
> below. Please help us in porting the kernel.
> I am attaching the config file .
>
> =>bootm 0x100000
> ## Booting image at 00100000 ...
> Image Name: Linux-2.6.13
> Image Type: PowerPC Linux Kernel Image (gzip compressed)
> Data Size: 958189 Bytes = 935.7 kB
> Load Address: 00000000
> Entry Point: 00000000
> Verifying Checksum ... OK
> Uncompressing Kernel Image ... gunzip function called
> OK
> do_bootm_linux called ...do_bootm_linux after ...part2 do_boot_linux
> before RAM
> Disk image loading ...
> No initrd
> ## Transferring control to Linux (at address 00000000) ...
>
> >Most probably, something odd with serial setup.
> >You have enabled just all the stuff (SCC/SMC), but (on 8xx at least)
>>they can hardly live together, having alternative - conflicting IO pin configurations.
We enabling only SMC2, still it is showing the same problem. In U-boot loader we have modified the default console to SMC2. We have not done any modifications to the original linux-2.6.13 code.
I am sending config file as an attachment.
I am sending U-boot env varibles also
=>printenv
bootcmd=bootm;setenv bootargs root=/dev/ram rw
bootdelay=5
baudrate=57600
loads_echo=1
ethaddr=9a:52:63:15:85:25
bootfile=uImage
filesize=95f0a
ipaddr=192.168.3.2
serverip=192.168.3.6
netdev=eth0
netmask=255.255.255.0
addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmas
k}:${hostname}:${netdev}:off
ramargs=setenv bootargs root=/dev/ram rw
kernel_addr=0xfc0a0000
ramdisk_addr=0xfc160000
flash_ram=run ramargs addip;bootm 0xfc0a0000 0xfc160000
net_ram=tftpboot 0x100000 uImage;tftpboot 0x400000 rambb2;run ramargs addip;boot
m 0x100000 0x400000
stdin=serial
stdout=serial
stderr=serial
bootargs=root=/dev/ram rw
Environment size: 638/262140 bytes
---------------------------------
Yahoo! Photos
Ring in the New Year with Photo Calendars. Add photos, events, holidays, whatever.
[-- Attachment #1.2: Type: text/html, Size: 3026 bytes --]
[-- Attachment #2: 172188218-.config --]
[-- Type: text/plain, Size: 11955 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.13
# Thu Dec 29 10:54:14 2005
#
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_PPC=y
CONFIG_PPC32=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
# CONFIG_MODULES is not set
#
# Processor
#
# CONFIG_6xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_POWER3 is not set
# CONFIG_POWER4 is not set
CONFIG_8xx=y
# CONFIG_E200 is not set
# CONFIG_E500 is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_KEXEC is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_WANT_EARLY_SERIAL is not set
CONFIG_EMBEDDEDBOOT=y
CONFIG_NOT_COHERENT_CACHE=y
#
# Platform options
#
CONFIG_FADS=y
# CONFIG_RPXLITE is not set
# CONFIG_RPXCLASSIC is not set
# CONFIG_BSEIP is not set
CONFIG_MPC8XXFADS=y
# CONFIG_MPC86XADS is not set
# CONFIG_MPC885ADS is not set
# CONFIG_TQM823L is not set
# CONFIG_TQM850L is not set
# CONFIG_TQM855L is not set
# CONFIG_TQM860L is not set
# CONFIG_FPS850L is not set
# CONFIG_SPD823TS is not set
# CONFIG_IVMS8 is not set
# CONFIG_IVML24 is not set
# CONFIG_SM850 is not set
# CONFIG_HERMES_PRO is not set
# CONFIG_IP860 is not set
# CONFIG_LWMON is not set
# CONFIG_PCU_E is not set
# CONFIG_CCM is not set
# CONFIG_LANTEC is not set
# CONFIG_MBX is not set
# CONFIG_WINCEPT is not set
# CONFIG_HIGHMEM is not set
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS1,57600 console=tty1 root=/dev/ram"
# CONFIG_PM is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
# Bus options
#
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_QSPAN is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_BOOT_LOAD=0x00400000
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_ARPD=y
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
CONFIG_IP_TCPDIAG_IPV6=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
CONFIG_BRIDGE=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_SCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# I2O device support
#
#
# Macintosh device drivers
#
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
#
# Ethernet (1000 Mbit)
#
#
# Ethernet (10000 Mbit)
#
#
# Token Ring devices
#
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_CPM_SCC1 is not set
# CONFIG_SERIAL_CPM_SCC2 is not set
# CONFIG_SERIAL_CPM_SCC3 is not set
# CONFIG_SERIAL_CPM_SCC4 is not set
# CONFIG_SERIAL_CPM_SMC1 is not set
CONFIG_SERIAL_CPM_SMC2=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
#
# I2C support
#
# CONFIG_I2C is not set
# CONFIG_I2C_SENSOR is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
#
# Misc devices
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
#
# SN Devices
#
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_SYSFS=y
# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
# CONFIG_NLS is not set
#
# MPC8xx CPM Options
#
# CONFIG_SCC_ENET is not set
CONFIG_FEC_ENET=y
CONFIG_USE_MDIO=y
CONFIG_FEC_AM79C874=y
# CONFIG_FEC_LXT970 is not set
# CONFIG_FEC_LXT971 is not set
# CONFIG_FEC_QS6612 is not set
CONFIG_ENET_BIG_BUFFERS=y
#
# Generic MPC8xx Options
#
# CONFIG_8xx_COPYBACK is not set
# CONFIG_8xx_CPU6 is not set
CONFIG_NO_UCODE_PATCH=y
# CONFIG_USB_SOF_UCODE_PATCH is not set
# CONFIG_I2C_SPI_UCODE_PATCH is not set
# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Porting Linux2.6.13 on MPC860T custom build board
[not found] <43B3958E.4010002@writeme.com>
@ 2005-12-29 10:07 ` venkatajagadeesh p
2005-12-29 15:24 ` Sinan Akman
0 siblings, 1 reply; 6+ messages in thread
From: venkatajagadeesh p @ 2005-12-29 10:07 UTC (permalink / raw)
To: Sinan Akman, linuxppc-embedded
[-- Attachment #1: Type: text/plain, Size: 338 bytes --]
Hi Sinan Akman
Thanks for Your suggestion, Now linux is up and booting. thanks for the community who contributed in this porting.
Thanks and one and all,
Venkata jagadish.p
---------------------------------
Yahoo! Photos
Ring in the New Year with Photo Calendars. Add photos, events, holidays, whatever.
[-- Attachment #2: Type: text/html, Size: 602 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Porting Linux2.6.13 on MPC860T custom build board
2005-12-29 10:07 ` venkatajagadeesh p
@ 2005-12-29 15:24 ` Sinan Akman
0 siblings, 0 replies; 6+ messages in thread
From: Sinan Akman @ 2005-12-29 15:24 UTC (permalink / raw)
To: venkatajagadeesh p; +Cc: linuxppc-embedded
venkatajagadeesh p wrote:
> Hi Sinan Akman
>
> Thanks for Your suggestion, Now linux is up and
> booting. thanks for the community who contributed in this porting.
I am glad it worked. I guess my reply to you didn't go through to
linuxppc-embedded.
You might want to post the sequence of things you tried, what worked and
what didn't. This
way someone else can find it through search, assuming it wasn't in the
FAQ already.
Regards
Sinan Akman
>
> Thanks and one and all,
> Venkata jagadish.p
>
> ------------------------------------------------------------------------
> Yahoo! Photos
> Ring in the New Year with Photo Calendars
> <http://us.rd.yahoo.com/mail_us/taglines/photos/*http://pg.photos.yahoo.com/ph//page?.file=calendar_splash.html&.dir=>.
> Add photos, events, holidays, whatever.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Porting Linux2.6.13 on MPC860T custom build board
@ 2005-12-30 4:44 venkatajagadeesh p
0 siblings, 0 replies; 6+ messages in thread
From: venkatajagadeesh p @ 2005-12-30 4:44 UTC (permalink / raw)
To: linuxppc-embedded, Sinan Akman
[-- Attachment #1: Type: text/plain, Size: 17250 bytes --]
We are seinding the details of porting Linux on MPC860T.
Initially we have enabled all the SMC/SCC devices these are conflicting with the console, the boot loader argument was wrong( connsole=ttyS1,57600 console=tty1 root=/dev/ram),and we have enabled CONFIG_VT.
Modifications :
We have selected only SMC2, and changed the boot loader argument to connsole=ttyCPM2,57600 root=/dev/ram , and modified the drivers/char/Kconfig file
( original lines )
config VT
bool "Virtual terminal" if EMBEDDED
select INPUT
default y if !VIOCONS
( Modified lines )
config VT
bool "Virtual terminal" if EMBEDDED
select INPUT
default n
These are the only modifications we have done to the config and Kconfig files.
Thanks
Venakta jagadeesh.p
> Hi Sinan Akman
>
> Thanks for Your suggestion, Now linux is up and
> booting. thanks for the community who contributed in this >porting.
> I am glad it worked. I guess my reply to you didn't go >through
>to
>linuxppc-embedded.
>You might want to post the sequence of things you tried, what >worked
>and
>what didn't. This
>way someone else can find it through search, assuming it >wasn't in the
>FAQ already.
> Regards
> Sinan Akman
>
> Thanks and one and all,
> Venkata jagadish.p
>
Sinan Akman <sinan@writeme.com> wrote:
Date: Thu, 29 Dec 2005 02:51:42 -0500
From: Sinan Akman <sinan@writeme.com>
To: venkatajagadeesh p <cpvjagadeesh@yahoo.com>
Subject: Re: Porting Linux2.6.13 on MPC860T custom build board
venkatajagadeesh p wrote:
> venkatajagadeesh p wrote:
> >/
> />/ Hi,
> />/ We are trying to port Linux-2.6.13 on Custom build MPC860T,
> board,
> />/ We are unable to see any messages on console. We got the output given
> />/ below. Please help us in porting the kernel.
> />/ I am attaching the config file .
> />/
> />/ =>bootm 0x100000
> />/ ## Booting image at 00100000 ...
> />/ Image Name: Linux-2.6.13
> />/ Image Type: PowerPC Linux Kernel Image (gzip compressed)
> />/ Data Size: 958189 Bytes = 935.7 kB
> />/ Load Address: 00000000
> />/ Entry Point: 00000000
> />/ Verifying Checksum ... OK
> />/ Uncompressing Kernel Image ... gunzip function called
> />/ OK
> />/ do_bootm_linux called ...do_bootm_linux after ...part2 do_boot_linux
> />/ before RAM
> />/ Disk image loading ...
> />/ No initrd
> />/ ## Transferring control to Linux (at address 00000000) ...
> />/
> /> >Most probably, something odd with serial setup.
> > >You have enabled just all the stuff (SCC/SMC), but (on 8xx at least)
> >>they can hardly live together, having alternative - conflicting IO
> pin configurations.
>
> We enabling only SMC2, still it is showing the same problem. In U-boot
> loader we have modified the default console to SMC2. We have not done
> any modifications to the original linux-2.6.13 code.
>
> I am sending config file as an attachment.
Try unsetting VT_CONSOLE. That is, uncheck "Support for console on
virtual terminal" in
Character Devices. It looks like your console output is directed to a
VT. You might also
want to specify console=ttyCPM2 in your bootloader argument.
Hope this helps
-- sinan
>
> I am sending U-boot env varibles also
>
> =>printenv
> bootcmd=bootm;setenv bootargs root=/dev/ram rw
> bootdelay=5
> baudrate=57600
> loads_echo=1
> ethaddr=9a:52:63:15:85:25
> bootfile=uImage
> filesize=95f0a
> ipaddr=192.168.3.2
> serverip=192.168.3.6
> netdev=eth0
> netmask=255.255.255.0
> addip=setenv bootargs ${bootargs}
> ip=${ipaddr}:${serverip}:${gatewayip}:${netmas
> k}:${hostname}:${netdev}:off
> ramargs=setenv bootargs root=/dev/ram rw
> kernel_addr=0xfc0a0000
> ramdisk_addr=0xfc160000
> flash_ram=run ramargs addip;bootm 0xfc0a0000 0xfc160000
> net_ram=tftpboot 0x100000 uImage;tftpboot 0x400000 rambb2;run ramargs
> addip;boot
> m 0x100000 0x400000
> stdin=serial
> stdout=serial
> stderr=serial
> bootargs=root=/dev/ram rw
> Environment size: 638/262140 bytes
>
>
>
> ------------------------------------------------------------------------
> Yahoo! Photos
> Ring in the New Year with Photo Calendars
> .
> Add photos, events, holidays, whatever.
>
>------------------------------------------------------------------------
>
>#
># Automatically generated make config: don't edit
># Linux kernel version: 2.6.13
># Thu Dec 29 10:54:14 2005
>#
>CONFIG_MMU=y
>CONFIG_GENERIC_HARDIRQS=y
>CONFIG_RWSEM_XCHGADD_ALGORITHM=y
>CONFIG_GENERIC_CALIBRATE_DELAY=y
>CONFIG_HAVE_DEC_LOCK=y
>CONFIG_PPC=y
>CONFIG_PPC32=y
>CONFIG_GENERIC_NVRAM=y
>CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
>
>#
># Code maturity level options
>#
>CONFIG_EXPERIMENTAL=y
>CONFIG_CLEAN_COMPILE=y
>CONFIG_BROKEN_ON_SMP=y
>CONFIG_INIT_ENV_ARG_LIMIT=32
>
>#
># General setup
>#
>CONFIG_LOCALVERSION=""
># CONFIG_SWAP is not set
>CONFIG_SYSVIPC=y
># CONFIG_POSIX_MQUEUE is not set
># CONFIG_BSD_PROCESS_ACCT is not set
>CONFIG_SYSCTL=y
># CONFIG_AUDIT is not set
># CONFIG_HOTPLUG is not set
>CONFIG_KOBJECT_UEVENT=y
># CONFIG_IKCONFIG is not set
># CONFIG_EMBEDDED is not set
>CONFIG_KALLSYMS=y
># CONFIG_KALLSYMS_EXTRA_PASS is not set
>CONFIG_PRINTK=y
>CONFIG_BUG=y
>CONFIG_BASE_FULL=y
>CONFIG_FUTEX=y
>CONFIG_EPOLL=y
>CONFIG_SHMEM=y
>CONFIG_CC_ALIGN_FUNCTIONS=0
>CONFIG_CC_ALIGN_LABELS=0
>CONFIG_CC_ALIGN_LOOPS=0
>CONFIG_CC_ALIGN_JUMPS=0
># CONFIG_TINY_SHMEM is not set
>CONFIG_BASE_SMALL=0
>
>#
># Loadable module support
>#
># CONFIG_MODULES is not set
>
>#
># Processor
>#
># CONFIG_6xx is not set
># CONFIG_40x is not set
># CONFIG_44x is not set
># CONFIG_POWER3 is not set
># CONFIG_POWER4 is not set
>CONFIG_8xx=y
># CONFIG_E200 is not set
># CONFIG_E500 is not set
># CONFIG_MATH_EMULATION is not set
># CONFIG_KEXEC is not set
># CONFIG_CPU_FREQ is not set
># CONFIG_WANT_EARLY_SERIAL is not set
>CONFIG_EMBEDDEDBOOT=y
>CONFIG_NOT_COHERENT_CACHE=y
>
>#
># Platform options
>#
>CONFIG_FADS=y
># CONFIG_RPXLITE is not set
># CONFIG_RPXCLASSIC is not set
># CONFIG_BSEIP is not set
>CONFIG_MPC8XXFADS=y
># CONFIG_MPC86XADS is not set
># CONFIG_MPC885ADS is not set
># CONFIG_TQM823L is not set
># CONFIG_TQM850L is not set
># CONFIG_TQM855L is not set
># CONFIG_TQM860L is not set
># CONFIG_FPS850L is not set
># CONFIG_SPD823TS is not set
># CONFIG_IVMS8 is not set
># CONFIG_IVML24 is not set
># CONFIG_SM850 is not set
># CONFIG_HERMES_PRO is not set
># CONFIG_IP860 is not set
># CONFIG_LWMON is not set
># CONFIG_PCU_E is not set
># CONFIG_CCM is not set
># CONFIG_LANTEC is not set
># CONFIG_MBX is not set
># CONFIG_WINCEPT is not set
># CONFIG_HIGHMEM is not set
>CONFIG_HZ_100=y
># CONFIG_HZ_250 is not set
># CONFIG_HZ_1000 is not set
>CONFIG_HZ=100
>CONFIG_PREEMPT_NONE=y
># CONFIG_PREEMPT_VOLUNTARY is not set
># CONFIG_PREEMPT is not set
>CONFIG_SELECT_MEMORY_MODEL=y
>CONFIG_FLATMEM_MANUAL=y
># CONFIG_DISCONTIGMEM_MANUAL is not set
># CONFIG_SPARSEMEM_MANUAL is not set
>CONFIG_FLATMEM=y
>CONFIG_FLAT_NODE_MEM_MAP=y
>CONFIG_BINFMT_ELF=y
># CONFIG_BINFMT_MISC is not set
>CONFIG_CMDLINE_BOOL=y
>CONFIG_CMDLINE="console=ttyS1,57600 console=tty1 root=/dev/ram"
># CONFIG_PM is not set
>CONFIG_SECCOMP=y
>CONFIG_ISA_DMA_API=y
>
>#
># Bus options
>#
># CONFIG_PCI is not set
># CONFIG_PCI_DOMAINS is not set
># CONFIG_PCI_QSPAN is not set
>
>#
># PCCARD (PCMCIA/CardBus) support
>#
># CONFIG_PCCARD is not set
>
>#
># Advanced setup
>#
># CONFIG_ADVANCED_OPTIONS is not set
>
>#
># Default settings for advanced configuration options are used
>#
>CONFIG_HIGHMEM_START=0xfe000000
>CONFIG_LOWMEM_SIZE=0x30000000
>CONFIG_KERNEL_START=0xc0000000
>CONFIG_TASK_SIZE=0x80000000
>CONFIG_CONSISTENT_START=0xff100000
>CONFIG_CONSISTENT_SIZE=0x00200000
>CONFIG_BOOT_LOAD=0x00400000
>
>#
># Networking
>#
>CONFIG_NET=y
>
>#
># Networking options
>#
>CONFIG_PACKET=y
>CONFIG_PACKET_MMAP=y
>CONFIG_UNIX=y
># CONFIG_NET_KEY is not set
>CONFIG_INET=y
># CONFIG_IP_MULTICAST is not set
># CONFIG_IP_ADVANCED_ROUTER is not set
>CONFIG_IP_FIB_HASH=y
>CONFIG_IP_PNP=y
>CONFIG_IP_PNP_DHCP=y
>CONFIG_IP_PNP_BOOTP=y
>CONFIG_IP_PNP_RARP=y
># CONFIG_NET_IPIP is not set
># CONFIG_NET_IPGRE is not set
>CONFIG_ARPD=y
># CONFIG_SYN_COOKIES is not set
># CONFIG_INET_AH is not set
># CONFIG_INET_ESP is not set
># CONFIG_INET_IPCOMP is not set
># CONFIG_INET_TUNNEL is not set
>CONFIG_IP_TCPDIAG=y
>CONFIG_IP_TCPDIAG_IPV6=y
># CONFIG_TCP_CONG_ADVANCED is not set
>CONFIG_TCP_CONG_BIC=y
>CONFIG_IPV6=y
># CONFIG_IPV6_PRIVACY is not set
># CONFIG_INET6_AH is not set
># CONFIG_INET6_ESP is not set
># CONFIG_INET6_IPCOMP is not set
># CONFIG_INET6_TUNNEL is not set
># CONFIG_IPV6_TUNNEL is not set
># CONFIG_NETFILTER is not set
>
>#
># SCTP Configuration (EXPERIMENTAL)
>#
># CONFIG_IP_SCTP is not set
># CONFIG_ATM is not set
>CONFIG_BRIDGE=y
># CONFIG_VLAN_8021Q is not set
># CONFIG_DECNET is not set
># CONFIG_LLC2 is not set
># CONFIG_IPX is not set
># CONFIG_ATALK is not set
># CONFIG_X25 is not set
># CONFIG_LAPB is not set
># CONFIG_NET_DIVERT is not set
># CONFIG_ECONET is not set
># CONFIG_WAN_ROUTER is not set
># CONFIG_NET_SCHED is not set
># CONFIG_NET_CLS_ROUTE is not set
>
>#
># Network testing
>#
># CONFIG_NET_PKTGEN is not set
># CONFIG_HAMRADIO is not set
># CONFIG_IRDA is not set
># CONFIG_BT is not set
>
>#
># Device Drivers
>#
>
>#
># Generic Driver Options
>#
>CONFIG_STANDALONE=y
>CONFIG_PREVENT_FIRMWARE_BUILD=y
># CONFIG_FW_LOADER is not set
>
>#
># Memory Technology Devices (MTD)
>#
># CONFIG_MTD is not set
>
>#
># Parallel port support
>#
># CONFIG_PARPORT is not set
>
>#
># Plug and Play support
>#
>
>#
># Block devices
>#
># CONFIG_BLK_DEV_FD is not set
># CONFIG_BLK_DEV_COW_COMMON is not set
># CONFIG_BLK_DEV_LOOP is not set
># CONFIG_BLK_DEV_NBD is not set
>CONFIG_BLK_DEV_RAM=y
>CONFIG_BLK_DEV_RAM_COUNT=16
>CONFIG_BLK_DEV_RAM_SIZE=4096
>CONFIG_BLK_DEV_INITRD=y
>CONFIG_INITRAMFS_SOURCE=""
># CONFIG_LBD is not set
># CONFIG_CDROM_PKTCDVD is not set
>
>#
># IO Schedulers
>#
>CONFIG_IOSCHED_NOOP=y
># CONFIG_IOSCHED_AS is not set
># CONFIG_IOSCHED_DEADLINE is not set
># CONFIG_IOSCHED_CFQ is not set
># CONFIG_ATA_OVER_ETH is not set
>
>#
># ATA/ATAPI/MFM/RLL support
>#
># CONFIG_IDE is not set
>
>#
># SCSI device support
>#
># CONFIG_SCSI is not set
>
>#
># Multi-device support (RAID and LVM)
>#
># CONFIG_MD is not set
>
>#
># Fusion MPT device support
>#
># CONFIG_FUSION is not set
>
>#
># IEEE 1394 (FireWire) support
>#
>
>#
># I2O device support
>#
>
>#
># Macintosh device drivers
>#
>
>#
># Network device support
>#
>CONFIG_NETDEVICES=y
># CONFIG_DUMMY is not set
># CONFIG_BONDING is not set
># CONFIG_EQUALIZER is not set
># CONFIG_TUN is not set
>
>#
># Ethernet (10 or 100Mbit)
>#
>CONFIG_NET_ETHERNET=y
>CONFIG_MII=y
>
>#
># Ethernet (1000 Mbit)
>#
>
>#
># Ethernet (10000 Mbit)
>#
>
>#
># Token Ring devices
>#
>
>#
># Wireless LAN (non-hamradio)
>#
># CONFIG_NET_RADIO is not set
>
>#
># Wan interfaces
>#
># CONFIG_WAN is not set
># CONFIG_PPP is not set
># CONFIG_SLIP is not set
># CONFIG_SHAPER is not set
># CONFIG_NETCONSOLE is not set
># CONFIG_NETPOLL is not set
># CONFIG_NET_POLL_CONTROLLER is not set
>
>#
># ISDN subsystem
>#
># CONFIG_ISDN is not set
>
>#
># Telephony Support
>#
># CONFIG_PHONE is not set
>
>#
># Input device support
>#
>CONFIG_INPUT=y
>
>#
># Userland interfaces
>#
>CONFIG_INPUT_MOUSEDEV=y
>CONFIG_INPUT_MOUSEDEV_PSAUX=y
>CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
>CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
># CONFIG_INPUT_JOYDEV is not set
># CONFIG_INPUT_TSDEV is not set
># CONFIG_INPUT_EVDEV is not set
># CONFIG_INPUT_EVBUG is not set
>
>#
># Input Device Drivers
>#
># CONFIG_INPUT_KEYBOARD is not set
># CONFIG_INPUT_MOUSE is not set
># CONFIG_INPUT_JOYSTICK is not set
># CONFIG_INPUT_TOUCHSCREEN is not set
># CONFIG_INPUT_MISC is not set
>
>#
># Hardware I/O ports
>#
># CONFIG_SERIO is not set
># CONFIG_GAMEPORT is not set
>
>#
># Character devices
>#
>CONFIG_VT=y
>CONFIG_VT_CONSOLE=y
>CONFIG_HW_CONSOLE=y
>CONFIG_SERIAL_NONSTANDARD=y
># CONFIG_COMPUTONE is not set
># CONFIG_ROCKETPORT is not set
># CONFIG_CYCLADES is not set
># CONFIG_DIGIEPCA is not set
># CONFIG_MOXA_INTELLIO is not set
># CONFIG_MOXA_SMARTIO is not set
># CONFIG_ISI is not set
># CONFIG_SYNCLINKMP is not set
># CONFIG_N_HDLC is not set
># CONFIG_RISCOM8 is not set
># CONFIG_SPECIALIX is not set
># CONFIG_SX is not set
># CONFIG_RIO is not set
># CONFIG_STALDRV is not set
>
>#
># Serial drivers
>#
># CONFIG_SERIAL_8250 is not set
>
>#
># Non-8250 serial port support
>#
>CONFIG_SERIAL_CORE=y
>CONFIG_SERIAL_CORE_CONSOLE=y
>CONFIG_SERIAL_CPM=y
>CONFIG_SERIAL_CPM_CONSOLE=y
># CONFIG_SERIAL_CPM_SCC1 is not set
># CONFIG_SERIAL_CPM_SCC2 is not set
># CONFIG_SERIAL_CPM_SCC3 is not set
># CONFIG_SERIAL_CPM_SCC4 is not set
># CONFIG_SERIAL_CPM_SMC1 is not set
>CONFIG_SERIAL_CPM_SMC2=y
>CONFIG_UNIX98_PTYS=y
># CONFIG_LEGACY_PTYS is not set
>
>#
># IPMI
>#
># CONFIG_IPMI_HANDLER is not set
>
>#
># Watchdog Cards
>#
># CONFIG_WATCHDOG is not set
># CONFIG_NVRAM is not set
># CONFIG_GEN_RTC is not set
># CONFIG_DTLK is not set
># CONFIG_R3964 is not set
>
>#
># Ftape, the floppy tape device driver
>#
># CONFIG_AGP is not set
># CONFIG_RAW_DRIVER is not set
>
>#
># TPM devices
>#
>
>#
># I2C support
>#
># CONFIG_I2C is not set
># CONFIG_I2C_SENSOR is not set
>
>#
># Dallas's 1-wire bus
>#
># CONFIG_W1 is not set
>
>#
># Hardware Monitoring support
>#
># CONFIG_HWMON is not set
>
>#
># Misc devices
>#
>
>#
># Multimedia devices
>#
># CONFIG_VIDEO_DEV is not set
>
>#
># Digital Video Broadcasting Devices
>#
># CONFIG_DVB is not set
>
>#
># Graphics support
>#
># CONFIG_FB is not set
>
>#
># Console display driver support
>#
>CONFIG_DUMMY_CONSOLE=y
>
>#
># Sound
>#
># CONFIG_SOUND is not set
>
>#
># USB support
>#
># CONFIG_USB_ARCH_HAS_HCD is not set
># CONFIG_USB_ARCH_HAS_OHCI is not set
>
>#
># USB Gadget Support
>#
># CONFIG_USB_GADGET is not set
>
>#
># MMC/SD Card support
>#
># CONFIG_MMC is not set
>
>#
># InfiniBand support
>#
>
>#
># SN Devices
>#
>
>#
># File systems
>#
>CONFIG_EXT2_FS=y
>CONFIG_EXT2_FS_XATTR=y
>CONFIG_EXT2_FS_POSIX_ACL=y
>CONFIG_EXT2_FS_SECURITY=y
>CONFIG_EXT2_FS_XIP=y
>CONFIG_FS_XIP=y
># CONFIG_EXT3_FS is not set
># CONFIG_JBD is not set
>CONFIG_FS_MBCACHE=y
># CONFIG_REISERFS_FS is not set
># CONFIG_JFS_FS is not set
>CONFIG_FS_POSIX_ACL=y
>
>#
># XFS support
>#
># CONFIG_XFS_FS is not set
># CONFIG_MINIX_FS is not set
>CONFIG_ROMFS_FS=y
>CONFIG_INOTIFY=y
># CONFIG_QUOTA is not set
>CONFIG_DNOTIFY=y
># CONFIG_AUTOFS_FS is not set
># CONFIG_AUTOFS4_FS is not set
>
>#
># CD-ROM/DVD Filesystems
>#
># CONFIG_ISO9660_FS is not set
># CONFIG_UDF_FS is not set
>
>#
># DOS/FAT/NT Filesystems
>#
># CONFIG_MSDOS_FS is not set
># CONFIG_VFAT_FS is not set
># CONFIG_NTFS_FS is not set
>
>#
># Pseudo filesystems
>#
>CONFIG_PROC_FS=y
># CONFIG_PROC_KCORE is not set
>CONFIG_SYSFS=y
># CONFIG_DEVPTS_FS_XATTR is not set
># CONFIG_TMPFS is not set
># CONFIG_HUGETLB_PAGE is not set
>CONFIG_RAMFS=y
>
>#
># Miscellaneous filesystems
>#
># CONFIG_ADFS_FS is not set
># CONFIG_AFFS_FS is not set
># CONFIG_HFS_FS is not set
># CONFIG_HFSPLUS_FS is not set
># CONFIG_BEFS_FS is not set
># CONFIG_BFS_FS is not set
># CONFIG_EFS_FS is not set
># CONFIG_CRAMFS is not set
># CONFIG_VXFS_FS is not set
># CONFIG_HPFS_FS is not set
># CONFIG_QNX4FS_FS is not set
># CONFIG_SYSV_FS is not set
># CONFIG_UFS_FS is not set
>
>#
># Network File Systems
>#
>CONFIG_NFS_FS=y
># CONFIG_NFS_V3 is not set
># CONFIG_NFS_V4 is not set
># CONFIG_NFS_DIRECTIO is not set
># CONFIG_NFSD is not set
>CONFIG_ROOT_NFS=y
>CONFIG_LOCKD=y
>CONFIG_NFS_COMMON=y
>CONFIG_SUNRPC=y
># CONFIG_RPCSEC_GSS_KRB5 is not set
># CONFIG_RPCSEC_GSS_SPKM3 is not set
># CONFIG_SMB_FS is not set
># CONFIG_CIFS is not set
># CONFIG_NCP_FS is not set
># CONFIG_CODA_FS is not set
># CONFIG_AFS_FS is not set
>
>#
># Partition Types
>#
># CONFIG_PARTITION_ADVANCED is not set
>CONFIG_MSDOS_PARTITION=y
>
>#
># Native Language Support
>#
># CONFIG_NLS is not set
>
>#
># MPC8xx CPM Options
>#
># CONFIG_SCC_ENET is not set
>CONFIG_FEC_ENET=y
>CONFIG_USE_MDIO=y
>CONFIG_FEC_AM79C874=y
># CONFIG_FEC_LXT970 is not set
># CONFIG_FEC_LXT971 is not set
># CONFIG_FEC_QS6612 is not set
>CONFIG_ENET_BIG_BUFFERS=y
>
>#
># Generic MPC8xx Options
>#
># CONFIG_8xx_COPYBACK is not set
># CONFIG_8xx_CPU6 is not set
>CONFIG_NO_UCODE_PATCH=y
># CONFIG_USB_SOF_UCODE_PATCH is not set
># CONFIG_I2C_SPI_UCODE_PATCH is not set
># CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
>
>#
># Library routines
>#
># CONFIG_CRC_CCITT is not set
># CONFIG_CRC32 is not set
># CONFIG_LIBCRC32C is not set
>
>#
># Profiling support
>#
># CONFIG_PROFILING is not set
>
>#
># Kernel hacking
>#
># CONFIG_PRINTK_TIME is not set
># CONFIG_DEBUG_KERNEL is not set
>CONFIG_LOG_BUF_SHIFT=14
>
>#
># Security options
>#
># CONFIG_KEYS is not set
># CONFIG_SECURITY is not set
>
>#
># Cryptographic options
>#
># CONFIG_CRYPTO is not set
>
>#
># Hardware crypto devices
>#
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Linuxppc-embedded mailing list
>Linuxppc-embedded@ozlabs.org
>https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>
---------------------------------
Yahoo! Photos
Ring in the New Year with Photo Calendars. Add photos, events, holidays, whatever.
[-- Attachment #2: Type: text/html, Size: 22952 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2005-12-30 4:44 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-12-30 4:44 Porting Linux2.6.13 on MPC860T custom build board venkatajagadeesh p
[not found] <43B3958E.4010002@writeme.com>
2005-12-29 10:07 ` venkatajagadeesh p
2005-12-29 15:24 ` Sinan Akman
-- strict thread matches above, loose matches on Subject: below --
2005-12-29 5:28 venkatajagadeesh p
2005-12-28 11:58 venkatajagadeesh p
2005-12-28 13:22 ` Vitaly Bordug
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).