From: Anton Blanchard <anton@samba.org>
To: linuxppc-dev@ozlabs.org
Cc: paulus@samba.org
Subject: [PATCH] powerpc: Remove oprofile spinlock backtrace code
Date: Mon, 27 Mar 2006 12:00:45 +1100 [thread overview]
Message-ID: <20060327010045.GD4962@krispykreme> (raw)
In-Reply-To: <20060327005701.GC4962@krispykreme>
Remove oprofile spinlock backtrace code now we have proper calltrace
support. Also make MMCRA sihv and sipr bits a variable since they may
change in future cpus. Finally, MMCRA should be a 64bit quantity.
Signed-off-by: Anton Blanchard <anton@samba.org>
---
Index: linux-2.6/arch/powerpc/oprofile/op_model_power4.c
===================================================================
--- linux-2.6.orig/arch/powerpc/oprofile/op_model_power4.c 2006-03-26 17:55:19.000000000 +1100
+++ linux-2.6/arch/powerpc/oprofile/op_model_power4.c 2006-03-26 17:55:19.000000000 +1100
@@ -25,18 +25,14 @@ static unsigned long reset_value[OP_MAX_
static int oprofile_running;
static int mmcra_has_sihv;
+/* Unfortunately these bits vary between CPUs */
+static unsigned long mmcra_sihv = MMCRA_SIHV;
+static unsigned long mmcra_sipr = MMCRA_SIPR;
/* mmcr values are set in power4_reg_setup, used in power4_cpu_setup */
static u32 mmcr0_val;
static u64 mmcr1_val;
-static u32 mmcra_val;
-
-/*
- * Since we do not have an NMI, backtracing through spinlocks is
- * only a best guess. In light of this, allow it to be disabled at
- * runtime.
- */
-static int backtrace_spinlocks;
+static u64 mmcra_val;
static void power4_reg_setup(struct op_counter_config *ctr,
struct op_system_config *sys,
@@ -63,8 +59,6 @@ static void power4_reg_setup(struct op_c
mmcr1_val = sys->mmcr1;
mmcra_val = sys->mmcra;
- backtrace_spinlocks = sys->backtrace_spinlocks;
-
for (i = 0; i < cur_cpu_spec->num_pmcs; ++i)
reset_value[i] = 0x80000000UL - ctr[i].count;
@@ -197,25 +191,6 @@ static void __attribute_used__ kernel_un
{
}
-static unsigned long check_spinlock_pc(struct pt_regs *regs,
- unsigned long profile_pc)
-{
- unsigned long pc = instruction_pointer(regs);
-
- /*
- * If both the SIAR (sampled instruction) and the perfmon exception
- * occurred in a spinlock region then we account the sample to the
- * calling function. This isnt 100% correct, we really need soft
- * IRQ disable so we always get the perfmon exception at the
- * point at which the SIAR is set.
- */
- if (backtrace_spinlocks && in_lock_functions(pc) &&
- in_lock_functions(profile_pc))
- return regs->link;
- else
- return profile_pc;
-}
-
/*
* On GQ and newer the MMCRA stores the HV and PR bits at the time
* the SIAR was sampled. We use that to work out if the SIAR was sampled in
@@ -228,17 +203,17 @@ static unsigned long get_pc(struct pt_re
/* Cant do much about it */
if (!mmcra_has_sihv)
- return check_spinlock_pc(regs, pc);
+ return pc;
mmcra = mfspr(SPRN_MMCRA);
/* Were we in the hypervisor? */
- if (firmware_has_feature(FW_FEATURE_LPAR) && (mmcra & MMCRA_SIHV))
+ if (firmware_has_feature(FW_FEATURE_LPAR) && (mmcra & mmcra_sihv))
/* function descriptor madness */
return *((unsigned long *)hypervisor_bucket);
/* We were in userspace, nothing to do */
- if (mmcra & MMCRA_SIPR)
+ if (mmcra & mmcra_sipr)
return pc;
#ifdef CONFIG_PPC_RTAS
@@ -257,7 +232,7 @@ static unsigned long get_pc(struct pt_re
/* function descriptor madness */
return *((unsigned long *)kernel_unknown_bucket);
- return check_spinlock_pc(regs, pc);
+ return pc;
}
static int get_kernel(unsigned long pc)
@@ -268,7 +243,7 @@ static int get_kernel(unsigned long pc)
is_kernel = is_kernel_addr(pc);
} else {
unsigned long mmcra = mfspr(SPRN_MMCRA);
- is_kernel = ((mmcra & MMCRA_SIPR) == 0);
+ is_kernel = ((mmcra & mmcra_sipr) == 0);
}
return is_kernel;
Index: linux-2.6/arch/powerpc/oprofile/common.c
===================================================================
--- linux-2.6.orig/arch/powerpc/oprofile/common.c 2006-03-26 17:55:19.000000000 +1100
+++ linux-2.6/arch/powerpc/oprofile/common.c 2006-03-26 17:55:19.000000000 +1100
@@ -117,17 +117,10 @@ static int op_powerpc_create_files(struc
oprofilefs_create_ulong(sb, root, "enable_kernel", &sys.enable_kernel);
oprofilefs_create_ulong(sb, root, "enable_user", &sys.enable_user);
-#ifdef CONFIG_PPC64
- oprofilefs_create_ulong(sb, root, "backtrace_spinlocks",
- &sys.backtrace_spinlocks);
-#endif
/* Default to tracing both kernel and user */
sys.enable_kernel = 1;
sys.enable_user = 1;
-#ifdef CONFIG_PPC64
- sys.backtrace_spinlocks = 0;
-#endif
return 0;
}
Index: linux-2.6/include/asm-powerpc/oprofile_impl.h
===================================================================
--- linux-2.6.orig/include/asm-powerpc/oprofile_impl.h 2006-03-26 17:55:19.000000000 +1100
+++ linux-2.6/include/asm-powerpc/oprofile_impl.h 2006-03-26 17:55:19.000000000 +1100
@@ -35,9 +35,6 @@ struct op_system_config {
#endif
unsigned long enable_kernel;
unsigned long enable_user;
-#ifdef CONFIG_PPC64
- unsigned long backtrace_spinlocks;
-#endif
};
/* Per-arch configuration */
next prev parent reply other threads:[~2006-03-27 1:00 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-03-27 0:23 [PATCH] powerpc: Remove some ifdefs in oprofile_impl.h Anton Blanchard
2006-03-27 0:46 ` [PATCH] powerpc: export validate_sp for oprofile calltrace Anton Blanchard
2006-03-27 0:57 ` [PATCH] powerpc: Add oprofile calltrace support Anton Blanchard
2006-03-27 1:00 ` Anton Blanchard [this message]
2006-03-27 1:03 ` [PATCH] powerpc: Add oprofile calltrace support to all powerpc cpus Anton Blanchard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060327010045.GD4962@krispykreme \
--to=anton@samba.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).