From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.lixom.net (lixom.net [66.141.50.11]) by ozlabs.org (Postfix) with ESMTP id 670E667B16 for ; Wed, 28 Jun 2006 05:22:27 +1000 (EST) Date: Tue, 27 Jun 2006 12:22:06 -0700 To: paulus@samba.org Subject: [PATCH] powerpc: Do a bit more cpu init cleanups Message-ID: <20060627192206.GB5130@pb15.lixom.net> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii From: Olof Johansson Cc: linuxppc-dev@ozlabs.org List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cleanup CPU inits a bit more, Geoff Levand already did some earlier. * Rename cpu_setup_power4.S to cpu_setup_ppc970.S * Move CPU state save to cpu_setup, since cpu_setup is only ever done on cpu 0 on 64-bit. * Rename __restore_cpu_setup to __restore_cpu_setup_ppc970 since it's only actually doing anything there, and check before calling instead of in the function (no check needed on powermac). * Same for __970_cpu_preinit * Rename pSeries_secondary_smp_init to generic_secondary_smp_init since everyone but powermac and iSeries use it. Build tested with all 64-bit defconfigs, boot tested on power5 and powermac. Signed-off-by: Olof Johansson Index: linux-2.6/arch/powerpc/kernel/Makefile =================================================================== --- linux-2.6.orig/arch/powerpc/kernel/Makefile +++ linux-2.6/arch/powerpc/kernel/Makefile @@ -16,7 +16,7 @@ obj-y := semaphore.o cputable.o ptrac obj-y += vdso32/ obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \ signal_64.o ptrace32.o \ - paca.o cpu_setup_power4.o \ + paca.o cpu_setup_ppc970.o \ firmware.o sysfs.o obj-$(CONFIG_PPC64) += vdso64/ obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o Index: linux-2.6/arch/powerpc/kernel/cpu_setup_power4.S =================================================================== --- linux-2.6.orig/arch/powerpc/kernel/cpu_setup_power4.S +++ /dev/null @@ -1,216 +0,0 @@ -/* - * This file contains low level CPU setup functions. - * Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include -#include -#include -#include -#include -#include -#include - -_GLOBAL(__970_cpu_preinit) - /* - * Do nothing if not running in HV mode - */ - mfmsr r0 - rldicl. r0,r0,4,63 - beqlr - - /* - * Deal only with PPC970 and PPC970FX. - */ - mfspr r0,SPRN_PVR - srwi r0,r0,16 - cmpwi r0,0x39 - beq 1f - cmpwi r0,0x3c - beq 1f - cmpwi r0,0x44 - bnelr -1: - - /* Make sure HID4:rm_ci is off before MMU is turned off, that large - * pages are enabled with HID4:61 and clear HID5:DCBZ_size and - * HID5:DCBZ32_ill - */ - li r0,0 - mfspr r3,SPRN_HID4 - rldimi r3,r0,40,23 /* clear bit 23 (rm_ci) */ - rldimi r3,r0,2,61 /* clear bit 61 (lg_pg_en) */ - sync - mtspr SPRN_HID4,r3 - isync - sync - mfspr r3,SPRN_HID5 - rldimi r3,r0,6,56 /* clear bits 56 & 57 (DCBZ*) */ - sync - mtspr SPRN_HID5,r3 - isync - sync - - /* Setup some basic HID1 features */ - mfspr r0,SPRN_HID1 - li r3,0x1200 /* enable i-fetch cacheability */ - sldi r3,r3,44 /* and prefetch */ - or r0,r0,r3 - mtspr SPRN_HID1,r0 - mtspr SPRN_HID1,r0 - isync - - /* Clear HIOR */ - li r0,0 - sync - mtspr SPRN_HIOR,0 /* Clear interrupt prefix */ - isync - blr - -_GLOBAL(__setup_cpu_ppc970) - mfspr r0,SPRN_HID0 - li r11,5 /* clear DOZE and SLEEP */ - rldimi r0,r11,52,8 /* set NAP and DPM */ - mtspr SPRN_HID0,r0 - mfspr r0,SPRN_HID0 - mfspr r0,SPRN_HID0 - mfspr r0,SPRN_HID0 - mfspr r0,SPRN_HID0 - mfspr r0,SPRN_HID0 - mfspr r0,SPRN_HID0 - sync - isync - blr - -/* Definitions for the table use to save CPU states */ -#define CS_HID0 0 -#define CS_HID1 8 -#define CS_HID4 16 -#define CS_HID5 24 -#define CS_SIZE 32 - - .data - .balign L1_CACHE_BYTES,0 -cpu_state_storage: - .space CS_SIZE - .balign L1_CACHE_BYTES,0 - .text - -/* Called in normal context to backup CPU 0 state. This - * does not include cache settings. This function is also - * called for machine sleep. This does not include the MMU - * setup, BATs, etc... but rather the "special" registers - * like HID0, HID1, HID4, etc... - */ -_GLOBAL(__save_cpu_setup) - /* Some CR fields are volatile, we back it up all */ - mfcr r7 - - /* Get storage ptr */ - LOAD_REG_IMMEDIATE(r5,cpu_state_storage) - - /* We only deal with 970 for now */ - mfspr r0,SPRN_PVR - srwi r0,r0,16 - cmpwi r0,0x39 - beq 1f - cmpwi r0,0x3c - beq 1f - cmpwi r0,0x44 - bne 2f - -1: /* Save HID0,1,4 and 5 */ - mfspr r3,SPRN_HID0 - std r3,CS_HID0(r5) - mfspr r3,SPRN_HID1 - std r3,CS_HID1(r5) - mfspr r3,SPRN_HID4 - std r3,CS_HID4(r5) - mfspr r3,SPRN_HID5 - std r3,CS_HID5(r5) - -2: - mtcr r7 - blr - -/* Called with no MMU context (typically MSR:IR/DR off) to - * restore CPU state as backed up by the previous - * function. This does not include cache setting - */ -_GLOBAL(__restore_cpu_setup) - /* Get storage ptr (FIXME when using anton reloc as we - * are running with translation disabled here - */ - LOAD_REG_IMMEDIATE(r5,cpu_state_storage) - - /* We only deal with 970 for now */ - mfspr r0,SPRN_PVR - srwi r0,r0,16 - cmpwi r0,0x39 - beq 1f - cmpwi r0,0x3c - beq 1f - cmpwi r0,0x44 - bnelr - -1: /* Before accessing memory, we make sure rm_ci is clear */ - li r0,0 - mfspr r3,SPRN_HID4 - rldimi r3,r0,40,23 /* clear bit 23 (rm_ci) */ - sync - mtspr SPRN_HID4,r3 - isync - sync - - /* Clear interrupt prefix */ - li r0,0 - sync - mtspr SPRN_HIOR,0 - isync - - /* Restore HID0 */ - ld r3,CS_HID0(r5) - sync - isync - mtspr SPRN_HID0,r3 - mfspr r3,SPRN_HID0 - mfspr r3,SPRN_HID0 - mfspr r3,SPRN_HID0 - mfspr r3,SPRN_HID0 - mfspr r3,SPRN_HID0 - mfspr r3,SPRN_HID0 - sync - isync - - /* Restore HID1 */ - ld r3,CS_HID1(r5) - sync - isync - mtspr SPRN_HID1,r3 - mtspr SPRN_HID1,r3 - sync - isync - - /* Restore HID4 */ - ld r3,CS_HID4(r5) - sync - isync - mtspr SPRN_HID4,r3 - sync - isync - - /* Restore HID5 */ - ld r3,CS_HID5(r5) - sync - isync - mtspr SPRN_HID5,r3 - sync - isync - blr - Index: linux-2.6/arch/powerpc/kernel/cpu_setup_ppc970.S =================================================================== --- /dev/null +++ linux-2.6/arch/powerpc/kernel/cpu_setup_ppc970.S @@ -0,0 +1,175 @@ +/* + * This file contains low level CPU setup functions. + * Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +_GLOBAL(__cpu_preinit_ppc970) + /* Do nothing if not running in HV mode */ + mfmsr r0 + rldicl. r0,r0,4,63 + beqlr + + /* Make sure HID4:rm_ci is off before MMU is turned off, that large + * pages are enabled with HID4:61 and clear HID5:DCBZ_size and + * HID5:DCBZ32_ill + */ + li r0,0 + mfspr r3,SPRN_HID4 + rldimi r3,r0,40,23 /* clear bit 23 (rm_ci) */ + rldimi r3,r0,2,61 /* clear bit 61 (lg_pg_en) */ + sync + mtspr SPRN_HID4,r3 + isync + sync + mfspr r3,SPRN_HID5 + rldimi r3,r0,6,56 /* clear bits 56 & 57 (DCBZ*) */ + sync + mtspr SPRN_HID5,r3 + isync + sync + + /* Setup some basic HID1 features */ + mfspr r0,SPRN_HID1 + li r3,0x1200 /* enable i-fetch cacheability */ + sldi r3,r3,44 /* and prefetch */ + or r0,r0,r3 + mtspr SPRN_HID1,r0 + mtspr SPRN_HID1,r0 + isync + + /* Clear HIOR */ + li r0,0 + sync + mtspr SPRN_HIOR,0 /* Clear interrupt prefix */ + isync + blr + +/* Definitions for the table use to save CPU states */ +#define CS_HID0 0 +#define CS_HID1 8 +#define CS_HID4 16 +#define CS_HID5 24 +#define CS_SIZE 32 + + .data + .balign L1_CACHE_BYTES,0 +cpu_state_storage: + .space CS_SIZE + .balign L1_CACHE_BYTES,0 + .text + + +_GLOBAL(__setup_cpu_ppc970) + /* Do nothing if not running in HV mode */ + mfmsr r0 + rldicl. r0,r0,4,63 + beqlr + + mfspr r0,SPRN_HID0 + li r11,5 /* clear DOZE and SLEEP */ + rldimi r0,r11,52,8 /* set NAP and DPM */ + mtspr SPRN_HID0,r0 + mfspr r0,SPRN_HID0 + mfspr r0,SPRN_HID0 + mfspr r0,SPRN_HID0 + mfspr r0,SPRN_HID0 + mfspr r0,SPRN_HID0 + mfspr r0,SPRN_HID0 + sync + isync + + /* Save away cpu state */ + LOAD_REG_IMMEDIATE(r5,cpu_state_storage) + + /* Save HID0,1,4 and 5 */ + mfspr r3,SPRN_HID0 + std r3,CS_HID0(r5) + mfspr r3,SPRN_HID1 + std r3,CS_HID1(r5) + mfspr r3,SPRN_HID4 + std r3,CS_HID4(r5) + mfspr r3,SPRN_HID5 + std r3,CS_HID5(r5) + + blr + +/* Called with no MMU context (typically MSR:IR/DR off) to + * restore CPU state as backed up by the previous + * function. This does not include cache setting + */ +_GLOBAL(__restore_cpu_setup_ppc970) + /* Do nothing if not running in HV mode */ + mfmsr r0 + rldicl. r0,r0,4,63 + beqlr + + LOAD_REG_IMMEDIATE(r5,cpu_state_storage) + /* Before accessing memory, we make sure rm_ci is clear */ + li r0,0 + mfspr r3,SPRN_HID4 + rldimi r3,r0,40,23 /* clear bit 23 (rm_ci) */ + sync + mtspr SPRN_HID4,r3 + isync + sync + + /* Clear interrupt prefix */ + li r0,0 + sync + mtspr SPRN_HIOR,0 + isync + + /* Restore HID0 */ + ld r3,CS_HID0(r5) + sync + isync + mtspr SPRN_HID0,r3 + mfspr r3,SPRN_HID0 + mfspr r3,SPRN_HID0 + mfspr r3,SPRN_HID0 + mfspr r3,SPRN_HID0 + mfspr r3,SPRN_HID0 + mfspr r3,SPRN_HID0 + sync + isync + + /* Restore HID1 */ + ld r3,CS_HID1(r5) + sync + isync + mtspr SPRN_HID1,r3 + mtspr SPRN_HID1,r3 + sync + isync + + /* Restore HID4 */ + ld r3,CS_HID4(r5) + sync + isync + mtspr SPRN_HID4,r3 + sync + isync + + /* Restore HID5 */ + ld r3,CS_HID5(r5) + sync + isync + mtspr SPRN_HID5,r3 + sync + isync + blr + Index: linux-2.6/arch/powerpc/kernel/head_64.S =================================================================== --- linux-2.6.orig/arch/powerpc/kernel/head_64.S +++ linux-2.6/arch/powerpc/kernel/head_64.S @@ -152,7 +152,7 @@ _GLOBAL(__secondary_hold) bne 100b #if defined(CONFIG_SMP) || defined(CONFIG_KEXEC) - LOAD_REG_IMMEDIATE(r4, .pSeries_secondary_smp_init) + LOAD_REG_IMMEDIATE(r4, .generic_secondary_smp_init) mtctr r4 mr r3,r24 bctr @@ -1473,18 +1473,28 @@ fwnmi_data_area: . = 0x8000 /* - * On pSeries, secondary processors spin in the following code. + * On pSeries and most other platforms, secondary processors spin + * in the following code. * At entry, r3 = this processor's number (physical cpu id) */ -_GLOBAL(pSeries_secondary_smp_init) +_GLOBAL(generic_secondary_smp_init) mr r24,r3 /* turn on 64-bit mode */ bl .enable_64b_mode isync - /* Copy some CPU settings from CPU 0 */ - bl .__restore_cpu_setup + /* Copy some CPU settings from CPU 0, only needed on PPC970{,FX,MP} */ + mfspr r0,SPRN_PVR + srwi r0,r0,16 + cmpwi r0,0x39 /* 970 */ + beq 1f + cmpwi r0,0x3c /* 970FX */ + beq 1f + cmpwi r0,0x44 /* 970MP */ + bne 2f +1: bl .__restore_cpu_setup_ppc970 +2: /* Set up a paca value for this processor. Since we have the * physical cpu id in r24, we need to search the pacas to find @@ -1600,7 +1610,16 @@ _GLOBAL(__start_initialization_multiplat bl .enable_64b_mode /* Setup some critical 970 SPRs before switching MMU off */ - bl .__970_cpu_preinit + mfspr r0,SPRN_PVR + srwi r0,r0,16 + cmpwi r0,0x39 /* 970 */ + beq 1f + cmpwi r0,0x3c /* 970FX */ + beq 1f + cmpwi r0,0x44 /* 970MP */ + bne 2f +1: bl .__cpu_preinit_ppc970 +2: /* cpu # */ li r24,0 @@ -1771,7 +1790,7 @@ _GLOBAL(pmac_secondary_start) isync /* Copy some CPU settings from CPU 0 */ - bl .__restore_cpu_setup + bl .__restore_cpu_setup_ppc970 /* pSeries do that early though I don't think we really need it */ mfmsr r3 @@ -1921,12 +1940,6 @@ _STATIC(start_here_multiplatform) mr r5,r26 bl .identify_cpu - /* Save some low level config HIDs of CPU0 to be copied to - * other CPUs later on, or used for suspend/resume - */ - bl .__save_cpu_setup - sync - /* Do very early kernel initializations, including initial hash table, * stab and slb setup before we turn on relocation. */ Index: linux-2.6/arch/powerpc/platforms/cell/smp.c =================================================================== --- linux-2.6.orig/arch/powerpc/platforms/cell/smp.c +++ linux-2.6/arch/powerpc/platforms/cell/smp.c @@ -58,7 +58,7 @@ */ static cpumask_t of_spin_map; -extern void pSeries_secondary_smp_init(unsigned long); +extern void generic_secondary_smp_init(unsigned long); /** * smp_startup_cpu() - start the given cpu @@ -75,7 +75,7 @@ static inline int __devinit smp_startup_ { int status; unsigned long start_here = __pa((u32)*((unsigned long *) - pSeries_secondary_smp_init)); + generic_secondary_smp_init)); unsigned int pcpu; int start_cpu; Index: linux-2.6/arch/powerpc/platforms/pseries/smp.c =================================================================== --- linux-2.6.orig/arch/powerpc/platforms/pseries/smp.c +++ linux-2.6/arch/powerpc/platforms/pseries/smp.c @@ -63,7 +63,7 @@ */ static cpumask_t of_spin_map; -extern void pSeries_secondary_smp_init(unsigned long); +extern void generic_secondary_smp_init(unsigned long); #ifdef CONFIG_HOTPLUG_CPU @@ -271,7 +271,7 @@ static inline int __devinit smp_startup_ { int status; unsigned long start_here = __pa((u32)*((unsigned long *) - pSeries_secondary_smp_init)); + generic_secondary_smp_init)); unsigned int pcpu; int start_cpu;