Failed to initialize the ethernet on PPC4 40GP

Failed to initialize the ethernet on PPC4 40GP

[Denny]

[-- Attachment #1: Type: text/plain, Size: 95 bytes --]

HI,
    Does anyone ecounter this failure,it always tell me "No ethernet found", why?
 
- Denny

[-- Attachment #2: Type: text/html, Size: 547 bytes --]

Re: Failed to initialize the ethernet on PPC4 40GP

[Stefan Roese]

Hi Denny,

On Monday 10 July 2006 11:41, Denny wrote:
>     Does anyone ecounter this failure,it always tell me "No ethernet
> found", why?

Is this question linux or U-Boot related? If linux then you may have not 
enabled the 4xx ethernet support in your kernel configuration. If U-Boot, 
then please set the MAC addresses (ethaddr and eth1addr) and reset the board. 
And if it really is an U-Boot question, you should address the correct 
mailinglist.

Best regards,
Stefan

Re: Re: Failed to initialize the ethernet on PPC4 40GP

[Denny]

[-- Attachment #1: Type: text/plain, Size: 647 bytes --]

Sorry, It is the UBoot question, I will address this to the UBoot maillist the next time!
After I add the environment valiable "ipaddr", this message disappeared,but the ethernet still not work (the MII on my custom board work on RMII mode).
u-boot => tftp 0x100000 u-boot.bin
miiphy_register: non unique device name 'ppc_4xx_eth0'
PHY speed read failed, assuming 10bT
PHY duplex read failed, assuming half duplex
ENET Speed is 10 Mbps - HALF duplex connection
TFTP from server 192.168.65.235; our IP address is 192.168.65.239
Filename 'u-boot.bin'.
Load address: 0x100000
Loading: T T T T T T T T T T 
Retry count exceeded; starting again
- Denny

[-- Attachment #2: Type: text/html, Size: 1119 bytes --]

Re: Re: Failed to initialize the ethernet on PPC4 40GP

[Denny]

[-- Attachment #1: Type: text/plain, Size: 91 bytes --]

Hi,
   A silly question, How can I add myself to the UBoot mailist, thanks!
 
- Denny
 
 
 

[-- Attachment #2: Type: text/html, Size: 619 bytes --]

Re: Failed to initialize the ethernet on PPC4 40GP

[Wolfgang Denk]

Hi Denny,

in message <44B4B9B4.000153.02321@bj163app79.163.com> you wrote:
> 
>    A silly question, How can I add myself to the UBoot mailist, thanks!

By subscribing.

See https://lists.sourceforge.net/lists/listinfo/u-boot-users

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
... bacteriological warfare ... hard to believe we were once foolish
enough to play around with that.
	-- McCoy, "The Omega Glory", stardate unknown