From: Vitaly Bordug <vbordug@ru.mvista.com>
To: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev <linuxppc-dev@ozlabs.org>
Subject: [PATCH 1/6] POWERPC: CPM2 SoC support to fsl_soc.c
Date: Sat, 12 Aug 2006 04:10:06 +0400 [thread overview]
Message-ID: <20060812001006.6186.75859.stgit@localhost.localdomain> (raw)
In-Reply-To: <20060812000655.6186.42738.stgit@localhost.localdomain>
This patch contains necessary modifications to support the CPM2 SoC peripherals.
For the time being, those are fs_enet Ethernet driver and cpm_uart serial.
Written initially to support mpc8560, it also suites to the part of the large PQ2
(more specifically, mpc8260) family.
Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
---
arch/powerpc/sysdev/fsl_soc.c | 265 ++++++++++++++++++++++++++++++++++++++++-
arch/powerpc/sysdev/fsl_soc.h | 2
2 files changed, 262 insertions(+), 5 deletions(-)
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 4a6aa64..7f4ed40 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -2,6 +2,9 @@
* FSL SoC setup code
*
* Maintained by Kumar Gala (see MAINTAINERS for contact information)
+ *
+ * 2006 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -20,11 +23,14 @@ #include <linux/module.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/fsl_devices.h>
+#include <linux/fs_enet_pd.h>
+#include <linux/fs_uart_pd.h>
#include <asm/system.h>
#include <asm/atomic.h>
#include <asm/io.h>
#include <asm/irq.h>
+#include <asm/time.h>
#include <asm/prom.h>
#include <sysdev/fsl_soc.h>
#include <mm/mmu_decl.h>
@@ -42,7 +48,9 @@ phys_addr_t get_immrbase(void)
if (soc) {
unsigned int size;
const void *prop = get_property(soc, "reg", &size);
- immrbase = of_translate_address(soc, prop);
+
+ if (prop)
+ immrbase = of_translate_address(soc, prop);
of_node_put(soc);
};
@@ -51,6 +59,57 @@ phys_addr_t get_immrbase(void)
EXPORT_SYMBOL(get_immrbase);
+#ifdef CONFIG_CPM2
+
+static u32 brgfreq = -1;
+
+u32 get_brgfreq(void)
+{
+ struct device_node *node;
+
+ if (brgfreq != -1)
+ return brgfreq;
+
+ node = of_find_node_by_type(NULL, "cpm");
+ if (node) {
+ unsigned int size;
+ unsigned int *prop = (unsigned int*)get_property(node, "brg-frequency", &size);
+
+ if (prop)
+ brgfreq = *prop;
+ of_node_put(node);
+ };
+
+ return brgfreq;
+}
+
+EXPORT_SYMBOL(get_brgfreq);
+
+static u32 fs_baudrate = -1;
+
+u32 get_baudrate(void)
+{
+ struct device_node *node;
+
+ if (fs_baudrate != -1)
+ return fs_baudrate;
+
+ node = of_find_node_by_type(NULL, "serial");
+ if (node) {
+ unsigned int size;
+ unsigned int *prop = (unsigned int*)get_property(node, "current-speed", &size);
+
+ if (prop)
+ fs_baudrate = *prop;
+ of_node_put(node);
+ };
+
+ return fs_baudrate;
+}
+
+EXPORT_SYMBOL(get_baudrate);
+#endif /* CONFIG_CPM2 */
+
static int __init gfar_mdio_of_init(void)
{
struct device_node *np;
@@ -85,8 +144,11 @@ static int __init gfar_mdio_of_init(void
mdio_data.irq[k] = -1;
while ((child = of_get_next_child(np, child)) != NULL) {
- const u32 *id = get_property(child, "reg", NULL);
- mdio_data.irq[*id] = irq_of_parse_and_map(child, 0);
+ int irq = irq_of_parse_and_map(child, 0);
+ if (irq != NO_IRQ) {
+ const u32 *id = get_property(child, "reg", NULL);
+ mdio_data.irq[*id] = irq;
+ }
}
ret =
@@ -128,7 +190,7 @@ static int __init gfar_of_init(void)
const char *model;
const void *mac_addr;
const phandle *ph;
- int n_res = 1;
+ int n_res = 2;
memset(r, 0, sizeof(r));
memset(&gfar_data, 0, sizeof(gfar_data));
@@ -159,7 +221,7 @@ static int __init gfar_of_init(void)
gfar_dev =
platform_device_register_simple("fsl-gianfar", i, &r[0],
- n_res + 1);
+ n_res);
if (IS_ERR(gfar_dev)) {
ret = PTR_ERR(gfar_dev);
@@ -470,3 +532,196 @@ err:
}
arch_initcall(fsl_usb_of_init);
+
+#ifdef CONFIG_CPM2
+
+static const char *fcc_regs = "fcc_regs";
+static const char *fcc_regs_c = "fcc_regs_c";
+static const char *fcc_pram = "fcc_pram";
+static char bus_id[9][BUS_ID_SIZE];
+
+static int __init fs_enet_of_init(void)
+{
+ struct device_node *np;
+ unsigned int i;
+ struct platform_device *fs_enet_dev;
+ struct resource res;
+ int ret;
+
+ for (np = NULL, i = 0;
+ (np = of_find_compatible_node(np, "network", "fs_enet")) != NULL;
+ i++) {
+ struct resource r[4];
+ struct device_node *phy, *mdio;
+ struct fs_platform_info fs_enet_data;
+ unsigned int *id, *phy_addr;
+ void *mac_addr;
+ phandle *ph;
+ char *model;
+
+ memset(r, 0, sizeof(r));
+ memset(&fs_enet_data, 0, sizeof(fs_enet_data));
+
+ ret = of_address_to_resource(np, 0, &r[0]);
+ if (ret)
+ goto err;
+ r[0].name = fcc_regs;
+
+ ret = of_address_to_resource(np, 1, &r[1]);
+ if (ret)
+ goto err;
+ r[1].name = fcc_pram;
+
+ ret = of_address_to_resource(np, 2, &r[2]);
+ if (ret)
+ goto err;
+ r[2].name = fcc_regs_c;
+
+ r[3].start = r[3].end = irq_of_parse_and_map(np, 0);
+ r[3].flags = IORESOURCE_IRQ;
+
+ fs_enet_dev =
+ platform_device_register_simple("fsl-cpm-fcc", i, &r[0], 4);
+
+ if (IS_ERR(fs_enet_dev)) {
+ ret = PTR_ERR(fs_enet_dev);
+ goto err;
+ }
+
+ model = (char *)get_property(np, "model", NULL);
+ if (model == NULL) {
+ ret = -ENODEV;
+ goto unreg;
+ }
+
+ mac_addr = (void *)get_property(np, "mac-address", NULL);
+ memcpy(fs_enet_data.macaddr, mac_addr, 6);
+
+ ph = (phandle *) get_property(np, "phy-handle", NULL);
+ phy = of_find_node_by_phandle(*ph);
+
+ if (phy == NULL) {
+ ret = -ENODEV;
+ goto unreg;
+ }
+
+ phy_addr = (u32 *) get_property(phy, "reg", NULL);
+ fs_enet_data.phy_addr = *phy_addr;
+
+ id = (u32 *) get_property(np, "device-id", NULL);
+ fs_enet_data.fs_no = *id;
+
+ mdio = of_get_parent(phy);
+ ret = of_address_to_resource(mdio, 0, &res);
+ if (ret) {
+ of_node_put(phy);
+ of_node_put(mdio);
+ goto unreg;
+ }
+
+ if (strstr(model, "FCC")) {
+ int fcc_index = fs_get_fcc_index(*id);
+
+ fs_enet_data.dpram_offset = (u32)cpm2_immr->im_dprambase;
+ fs_enet_data.rx_ring = 32;
+ fs_enet_data.tx_ring = 32;
+ fs_enet_data.rx_copybreak = 240;
+ fs_enet_data.use_napi = 0;
+ fs_enet_data.napi_weight = 17;
+ fs_enet_data.mem_offset = FCC_MEM_OFFSET(fcc_index);
+ fs_enet_data.cp_page = CPM_CR_FCC_PAGE(fcc_index);
+ fs_enet_data.cp_block = CPM_CR_FCC_SBLOCK(fcc_index);
+
+ snprintf((char*)&bus_id[(*id)], BUS_ID_SIZE, "%x:%02x",
+ (u32)res.start, fs_enet_data.phy_addr);
+ fs_enet_data.bus_id = (char*)&bus_id[(*id)];
+ }
+
+ of_node_put(phy);
+ of_node_put(mdio);
+
+ ret = platform_device_add_data(fs_enet_dev, &fs_enet_data,
+ sizeof(struct
+ fs_platform_info));
+ if (ret)
+ goto unreg;
+ }
+ return 0;
+
+unreg:
+ platform_device_unregister(fs_enet_dev);
+err:
+ return ret;
+}
+
+arch_initcall(fs_enet_of_init);
+
+static const char *scc_regs = "regs";
+static const char *scc_pram = "pram";
+
+static int __init cpm_uart_of_init(void)
+{
+ struct device_node *np;
+ unsigned int i;
+ struct platform_device *cpm_uart_dev;
+ int ret;
+
+ for (np = NULL, i = 0;
+ (np = of_find_compatible_node(np, "serial", "cpm_uart")) != NULL;
+ i++) {
+ struct resource r[3];
+ struct fs_uart_platform_info cpm_uart_data;
+ int *id;
+
+ memset(r, 0, sizeof(r));
+ memset(&cpm_uart_data, 0, sizeof(cpm_uart_data));
+
+ ret = of_address_to_resource(np, 0, &r[0]);
+ if (ret)
+ goto err;
+
+ r[0].name = scc_regs;
+
+ ret = of_address_to_resource(np, 1, &r[1]);
+ if (ret)
+ goto err;
+ r[1].name = scc_pram;
+
+ r[2].start = r[2].end = irq_of_parse_and_map(np, 0);
+ r[2].flags = IORESOURCE_IRQ;
+
+ cpm_uart_dev =
+ platform_device_register_simple("fsl-cpm-scc:uart", i, &r[0], 3);
+
+ if (IS_ERR(cpm_uart_dev)) {
+ ret = PTR_ERR(cpm_uart_dev);
+ goto err;
+ }
+
+ id = (int*)get_property(np, "device-id", NULL);
+ cpm_uart_data.fs_no = *id;
+ cpm_uart_data.uart_clk = ppc_proc_freq;
+
+ cpm_uart_data.tx_num_fifo = 4;
+ cpm_uart_data.tx_buf_size = 32;
+ cpm_uart_data.rx_num_fifo = 4;
+ cpm_uart_data.rx_buf_size = 32;
+
+ ret =
+ platform_device_add_data(cpm_uart_dev, &cpm_uart_data,
+ sizeof(struct
+ fs_uart_platform_info));
+ if (ret)
+ goto unreg;
+ }
+
+ return 0;
+
+unreg:
+ platform_device_unregister(cpm_uart_dev);
+err:
+ return ret;
+}
+
+arch_initcall(cpm_uart_of_init);
+#endif /* CONFIG_CPM2 */
diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h
index c433d3f..25230ce 100644
--- a/arch/powerpc/sysdev/fsl_soc.h
+++ b/arch/powerpc/sysdev/fsl_soc.h
@@ -3,6 +3,8 @@ #define __PPC_FSL_SOC_H
#ifdef __KERNEL__
extern phys_addr_t get_immrbase(void);
+extern u32 get_brgfreq(void);
+extern u32 get_baudrate(void);
#endif
#endif
next prev parent reply other threads:[~2006-08-12 0:20 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-08-11 23:42 [PATCH 0/6] POWERPC: Add support for CPM2 peripherals and 8560 eval board Vitaly Bordug
2006-08-12 0:10 ` Vitaly Bordug [this message]
2006-08-12 0:10 ` [PATCH 2/6] CPM_UART: update to make the utilization possible both from ppc and powerpc Vitaly Bordug
2006-08-12 0:10 ` [PATCH 3/6] POWERPC: move the generic cpm2 stuff to the powerpc Vitaly Bordug
2006-08-12 18:36 ` Sergei Shtylyov
2006-08-22 10:02 ` Vitaly Bordug
2006-08-12 0:10 ` [PATCH 4/6] POWERPC: add support of mpc8560 eval board Vitaly Bordug
2006-08-17 20:04 ` Andy Fleming
2006-08-17 20:55 ` Segher Boessenkool
2006-08-22 11:03 ` Vitaly Bordug
2006-08-22 11:13 ` Vitaly Bordug
2006-08-12 0:10 ` [PATCH 5/6] [RFC] POWERPC cpm2: get rid of remapping the whole immr Vitaly Bordug
2006-08-12 0:10 ` [PATCH 6/6] [RFC] POWERPC: generic CPM2 peripherals rehaul with cpm2_map mechanism Vitaly Bordug
2006-08-12 20:18 ` Sergei Shtylyov
2006-08-22 10:13 ` Vitaly Bordug
2006-08-12 13:56 ` [PATCH 0/6] POWERPC: Add support for CPM2 peripherals and 8560 eval board Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060812001006.6186.75859.stgit@localhost.localdomain \
--to=vbordug@ru.mvista.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).