From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from web25915.mail.ukl.yahoo.com (web25915.mail.ukl.yahoo.com [217.146.176.253]) by ozlabs.org (Postfix) with SMTP id 2469367B72 for ; Tue, 15 Aug 2006 18:48:37 +1000 (EST) Message-ID: <20060815084156.30290.qmail@web25915.mail.ukl.yahoo.com> Date: Tue, 15 Aug 2006 09:41:56 +0100 (BST) From: emre kara Subject: eldk4.0 ppc_85xx-gdb failure while debugging with BDI2000 To: linuxppc-embedded@ozlabs.org MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Dear All; Is there any one use BDI2000 ppc_85xx-gdb (coming with ELDK4.0 dist). Please examine the log below. Target is waiting in start_kernel func. ppc_85xx-gdb vmlinux ...... ...... (gdb) target remote 192.168.101.101:2001 Remote debugging using 192.168.101.101:2001 0x00000000 in ?? () (gdb) q gdb can not display correct addr and debug anything. but at this state, older version toolchain (eldk3.1) is working properly. Second problem, I have check denx web site for an gdb update and found gdb-ppc_85xx-6.3.0.0-1.21_3.ppc.rpm,but instalation fails with the error below. ----------------------------------------- ppc_85xx-rpm -U gdb-ppc_85xx-6.3.0.0-1.21_3.ppc.rpm error: Failed dependencies: info-ppc_85xx is needed by gdb-ppc_85xx-6.3.0.0-1.21_3.ppc ------------------------------------------ Here is my bdi configuration file: -------------------------------------------------- ;bdiGDB configuration file for MPC8540ADS ;---------------------------------------- [INIT] WM32 0x000000f0 0x00000000 ;invalidate page table base [TARGET] CPUTYPE 8540 ;the CPU type JTAGCLOCK 0 ;use 16 MHz JTAG clock STARTUP STOP 100 ;halt core while HRESET is asserted BREAKMODE SOFT ;SOFT or HARD, HARD uses PPC hardware breakpoint STEPMODE HWBP ;JTAG or HWBP, HWBP uses a hardware breakpoint MMU XLAT; for kernel debug PTBASE 0xf0;for kernel debug WAKEUP 500 ;give reset time to complete POWERUP 5000 ;start delay after power-up detected in ms [HOST] PROMPT 8540_KRNL> [REGS] FILE $reg8560.def How can I solve this problems? Thanks. Emre ___________________________________________________________ All new Yahoo! Mail "The new Interface is stunning in its simplicity and ease of use." - PC Magazine http://uk.docs.yahoo.com/nowyoucan.html